Jump to content
SAU Community

Recommended Posts

well finally lifted the head off the 26 this morning and this is wat i get to see :D

wat are peoples thoughts on wat could cause this?

oh and please note the head had been port n polished and full overhaul only 100km's before this happened

head was fitted with tomei 260 10.25 cams tomei type a valvesprings and tomei buckets during this work

edit:feel free to pm and ask me who it was

this first

piston.jpg

this second

head2.jpg.

and this

head1.jpg

Edited by rb26s13
Link to comment
https://www.sau.com.au/forums/topic/199172-bent-valve/
Share on other sites

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Is is just the 1 valve?

Is there any hint that valves have been touching the crowns on the other 5 cylinders?

What does the retainer and colett look like on that valve?

Might have popper the retainer off with the increased spring pressure.

Link to comment
https://www.sau.com.au/forums/topic/199172-bent-valve/#findComment-3552097
Share on other sites

dont worry about the love tap on the piston too much (provided the damage is contained), but i would drop the head off to some-one you trust to have a look over it as if it only did 100kms before this happened the previous job was a botch.

Link to comment
https://www.sau.com.au/forums/topic/199172-bent-valve/#findComment-3552192
Share on other sites

dont worry about the love tap on the piston too much (provided the damage is contained), but i would drop the head off to some-one you trust to have a look over it as if it only did 100kms before this happened the previous job was a botch.

thats my thoughts and my mates thoughts aswell so far the place who did the work was in syd and was organised thru a "highly" praised person on here however i was extremely dissapointed with everything from them including quote time of 2 weeks for work to be carried out and ending up taking 3 months not to mention i paid the quoted price upfront before the head had arrived

sad thing out of all this is there is no one up here i'd trust with looking over it and putting a reason to the damage thats why i originaly paid 150freight each way for the head to get worked on down south

Edited by rb26s13
Link to comment
https://www.sau.com.au/forums/topic/199172-bent-valve/#findComment-3552211
Share on other sites

id write a few unhappy emails to the people involved wazz.... or simply start naming names because to me from what ive seen and heard of the heads preperation theres much left to be desired... i agree that it seems to be a "botched" job personally.... they diddnt even know how to match port????....

Edited by WHITE R32
Link to comment
https://www.sau.com.au/forums/topic/199172-bent-valve/#findComment-3552615
Share on other sites

is it possible that the clearance on this valve wasnt set right?

who put motor together and timed cams?

bottomend was stock

myself and a mate who is a fully quailified subaru mechanic assembled the motor

cam timing was set to 0

oh and for the people this was the workshops idea of matchporting

i supplied a full tomei gasket kit for the head to be match ported with which was returned to me COMPLETELY UNOPENED

WazsHead018.jpg

WazsHead001.jpg

Link to comment
https://www.sau.com.au/forums/topic/199172-bent-valve/#findComment-3552903
Share on other sites

id write a few unhappy emails to the people involved wazz.... or simply start naming names because to me from what ive seen and heard of the heads preperation theres much left to be desired... i agree that it seems to be a "botched" job personally.... they diddnt even know how to match port????....

i more than likely will be in due time however i'd like to wait a little bit to see if this person actualy notices this thread

and if anyone would like to know exactly who im talking about feel free to pm me and ask

Link to comment
https://www.sau.com.au/forums/topic/199172-bent-valve/#findComment-3552907
Share on other sites

being 10.25mm lift cams id asume the head was releived to accomodate the lift??

Did you dumby assemble the bottom end and check the piston to valve clearance with the new high lift cams???

Looks as if you have not had sufficient piston the valve clearance with the new cams and they have touched. Yes its possible only one valve touched, its just luck!

Link to comment
https://www.sau.com.au/forums/topic/199172-bent-valve/#findComment-3552915
Share on other sites

being 10.25mm lift cams id asume the head was releived to accomodate the lift??

Did you dumby assemble the bottom end and check the piston to valve clearance with the new high lift cams???

Looks as if you have not had sufficient piston the valve clearance with the new cams and they have touched. Yes its possible only one valve touched, its just luck!

they knew all specs of the motor

dummy assembly it was fine and clearance good

Link to comment
https://www.sau.com.au/forums/topic/199172-bent-valve/#findComment-3552932
Share on other sites

i should get out the vernie's and messure all the shims do it another day/night when i get around to it

nah you need to measure the bucket to lobe centre clearance with feeler gauges to work out the right shim they should have used.

Link to comment
https://www.sau.com.au/forums/topic/199172-bent-valve/#findComment-3552963
Share on other sites

Shit Wazz.... Not pretty mate....

after all the friggin hype of these heads it's a real disappointment :)

Shame mate.... Give us a buzz when the rebuild is happening :down:

Oh yeah and the port job (as said to you when originally got them back) was shite as well....

Link to comment
https://www.sau.com.au/forums/topic/199172-bent-valve/#findComment-3552967
Share on other sites

nah you need to measure the bucket to lobe centre clearance with feeler gauges to work out the right shim they should have used.

ahh yes i know wat you mean now.. dont think i actualy have any feeler gauges :)

ah well i dont think ill get anything out of them anyway.. and i'd rather not have them touch the head again.. i really dont wanna get assf**ked twice by them was costly enough the first time

Edited by rb26s13
Link to comment
https://www.sau.com.au/forums/topic/199172-bent-valve/#findComment-3552970
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I mean it's probably likely that people overestimate their skills in dialling in a setup and noticing the changes. I had SK shocks and springs, and added heavier springs and got them revalved by Sydney Shocks to suit based upon what I told them I wanted the car to handle like. I got back a completely different feeling set of shocks, which probably (?) feel great on track but holy hell are they rough on tram tracks and the like. Truth be told I doubt I'd be any faster or slower with either setup, or camber/castor combination. I also had whiteline eccentric castor bushes up front of my R34. I removed them and put in poly non-adjustable ones to soothe my OCD (nobody ever set the castor the same side to side, and it'd be near impossible to do) and be happy the wheel is centered in the well now for clearance reasons. Yes I wanted it to move 1mm 'back' :p I've effectively set my castor back to stock, negating all the benefits of that which is supposedly massive. I can't tell any difference steering the car.
    • You reckon? I have to disagree. Notwithstanding that at some point we may all be forced to do this to our cars if we want to keep driving them, there is absolutely nothing about an electric-converted-previously-IC-car that is ever good. EVs that are built by OEMs on platforms that were originally IC already suck, let alone the shitty outcomes that result from doing it as a retro to something that was actually built as an IC car. This is because the platform really needs to be designed to house the battery in a useful place (ie, down as low as possible) and the motors are properly located relative to the wheels that they have to drive. Converted platforms already suck at this. But when you try to shove sufficient battery capacity into a previously IC car, you can't put it down on/in the floor, because that space doesn't exist. You can't find enough space where the fuel tank used to be (if it is an inboard fuel tank) and you don't want to hang it out behind the rear axle line if you had a rear fuel tank. And there's not enough space in the tunnel if you still want to use it for anything remotely like what it was originally used for. The engine bay is too big for a motor, and you'd really prefer that the motor for the rear wheels wasn't in the front engine bay anyway. And there's not enough room where the diff was for a proper man-sized E motor. And then.... there is the complete lack of soul and emotion that is provided by EVs. There are some cracking restomods out there. Like the Alfaholics GTA thingo. But it is petrol powered. Look at the alternative EV version of a GTA restomod by Totem. it is jaw droppingly beautiful. But by all reports is is objectively awful to drive, despite having 600 HP or something, simply because there is nothing there. It sounds like a sewing machine or a leaf blower. It should scream and wail and make the hairs on your neck stand up. Oh, and it's 1500 bloody kg in a car that was <900kg when new. GTRs are heavy enough as it is without pushing them up to 2tonnes worth of pork.
    • https://www.dezeen.com/2025/01/06/nissan-electric-r32-skyline-gt-r-godzilla-sports-car/   I reckon this is pretty cool. Lots of other Resto mods have turned to ev power.
    • hahaha @joshuaho96 the most action it gets is when I have to drive from West to SE VIC to meet the fam. Even then, it;s on highway cruising speeds
    • don't know anyone in this thread, but i just found it, read the entire thing in a few hours, realized greg is still posting progress, and just have to say, this is awesome. it looks awesome. 100% right about the Uras kit making it a pain to get on hoists...have the same kit on my 34 and it takes six 2x4s and race ramps to do it without taking parts off. this reminds me exactly of this thread. https://grassrootsmotorsports.com/forum/build-projects-and-project-cars/r63-amg-the-unicorn-of-my-destruction/110824/page8/
×
×
  • Create New...