Jump to content
SAU Community

Recommended Posts

Hi all,

I decided to buy the Apexi power intake pod filter which set me back $180.00 for the complete kit which I thought was reasonable and then installed it on the weekend which was a breeze to do as most of you would already know.

What I would like to know from you other people out there is that for those of you that have fitted one of these pods, did you notice a slight decrease in power apart from the induction noise you get. I also know that your supposed to box the pod up to stop it from drawing hot air which I haven't done but is it maybe because it needs to be tuned for this type of filter?

Will it make it run richer as well?

Thanks guys,

Gianni

Link to comment
https://www.sau.com.au/forums/topic/19921-just-fitted-the-apexi-pod-filter/
Share on other sites

I got an Apexi pod and it seemed to offer slightly less power than when I had my friend's borrowed HKS pod on. But that was because of all the extra hot air it sucked in (the HKS pod kind of faces forwards and suchs in more air from the front) because once I put the cold air box in, it had more power than the HKS.

$180 is a good price. I got mine from Japan for less than that, but I kind of *cough*avoided*cough* customs.

The car doesn't need to be tuned for the pod/box, and it shouldn't run any richer than normal. Not enough to require tuning anyway, but an S-AFC or the like always helps.

Hi JimX,

thanks for your info, I'm thinking of getting a Power FC down the track for extra tuning ability but money is always a problem as most of you will agree on that one!

One thing I would really like to know is having the Apexi pod on rather than the standard air box, will you gain anymore power?

I'm thinking I should have gotten a dyno done before & after to see what the results would have been!

I don't know if pods offer more power than the standard air box because mine came with a pod and no box. In theory I guess they should, they have more surface area and a better shape for the intake.

I was a bit curious myself.. and had to take off my Blitz pod for an EPA. When I put the stock air box I noticed marketed less response and total power than with my pod with same 10psi boost, although my S-AFC, etc was not tuned for the box.

...mind you this was with unknown filter, so the results could vary

Thanks to all the reply's,

I think that down the track when I decide to do a bit more tuning like boost & power fc, the pod will pay off... hopefully. I'm just deciding weather I should leave it on for now? will I be using any more fuel with it on and no S-AFC or power fc? I'm sure someone did mention that putting a pod filter on will make it run richer...

who knows?

Thanks again guys....

How would it make your car run richer? If anything I would have thought that better airflow=leaner running, but either way the AFM works out how much air is coming in and adjusts the mixture accordingly.

Well, my car has a bit of a fuel problem anyway, but after fitting the pod I lost around 20K's. 30L gets me around 230k's.

The most obvious difference is the noise factor. You can actually hear the standard bov :rolleyes:

I couldn't tell you if it has made it any faster, but it feels like it comes on boost faster. Not a huge difference but a noticeable difference.

I don't have any stats to prove, but i believe i felt a difference.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheapest option, find a NEO head. Put in good springs, decent cams, and send it to the moon. I rev mine to 8600RPM, gets me about 232km/h down the main straight at SMSP bouncing off the limiter in 4th. I've never dared to grab 5th 🥲
    • Gday mate, Personally in my car i run 450kw in an s2 rb25 so also hydraulic lifters and have always run it to 7500 RPM and using some baby 256 poncams with new but stock springs and retainers. While i cant speak on any experience with solid lifters i personally have had no issues with my hydraulic lifters which were just cleaned and set in an oil bath before assembly over 7 years ago. Over 8k RPM is cool IMO and if you are using the stock gearbox or just a box with longer ratios the higher rpm certainly could aid to maintain boost into the next gear as that was always something i struggled with as i have a 3582r also but a hypergear equivalent could aid that issue. In summary i would make a choice on the cam you want to use first then decide which springs and retainers work best with it and then you can toss up if you really need the solid lifters, if the car is mainly street i would learn towards keeping the hydraulic lifters as when installed properly and nothing too hektik going on around them they do the trick.  
    • Yucky. Things haven't gotten any better though. Now you have Emerson and Honeywell pushing these massive DCS/Scada things with proprietary hardware. They're not a PLC, they're not a computer, they're a...distibuted PLCish/DCSish monster of thing, that only they can program because they make the barriers to entry for anyone else so fricking high. And their developers are all located in the third/developing world (and India, in case anyone does not include that place in that category) and there are terrible failings of the ESl variety, of the care and common sense variety, and f**king forget about Functional Safety. Not a one of them has any idea what it means to comply with an IEC 615xx series standard.
    • All of the ECU grounds are to the chassis, the IGN grounds are to the cylinder head and i believe all the OEM body harness are left in original locations, im trying to work out if i can tell if the sensor voltage itself is losing any power to it from the very low ECU voltage. But yeah a manual pressure gauge will help in picking which path to actually chase. Also please dont bully my wiring plan i never designed it to be universally understood hopefully it still can make sense to you, im a wiring virgin.  1 thing i have just noticed the pressure sensor in question relays both pressure and temperature, the temperature reading holds nice and steady despite the low ecu voltage but the pressure reading is the one that jumps around alot so maybe it is really a pressure issue? wiring plan.xlsx
×
×
  • Create New...