Jump to content
SAU Community

Recommended Posts

Hi,

Just wondering if anyone knows of a place I can buy the HKS pod filter replacement?

I just need the foam/filter inside.

I know I can order these online or get them from ebay. But is there a place in Canberra that sells them?

Or some kind of equivalent I could use?

Thanks :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/199348-hks-pod-filter-replacements/
Share on other sites

Yeah it stuffed alright lol.

I've actually had problems with my AFM because of this.

When I took it out I noticed it is tearing on the outside. It must have been in there for a while :thumbsup:

I'll pick one up from Trojan tomorrow hopefully.

Thanks for the help

Hope I'm not too late;

You need to buy the dry triple layer element. The twin/dual layer units are an oil/foam setup and can contaminate your afm [which you can clean with carb cleaner etc]. The triple layer units are dry and you will not have this problem. Advan in Sydney have them - they are light blue units [dual layer are usually purple or green].

Hmm...I've already ordered some from Trojan. I don't know if they are dual or triple layers...

I need 150mm filters, they only had 200mm. Which were the green ones; I will assume this means I will get the same ones but in 150mm. Oh well; I'll have to ask them about the triple layer filters.

Thanks for the help :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
    • Put a hand on an injector and see if that's what the buzzing is. You might be triggering the injectors by moving off idle command.
    • Ah, should have been clearer. Currently has a flex sensor installed all good to go.    like u mentioned, I’ve only ever known the car on e85, I might hate 98, but I have to try it out first. Everyone says the -5 turbos get pretty laggy on 98 octane tho…
×
×
  • Create New...