Jump to content
SAU Community

Recommended Posts

Hi All,

some of you may know that the Heat Treatments R32 GT-R has been in development in the off season and now is sporting a redeveloped engine/trans/turbo setup with the intention of going quicker. It is now back together and is now tuned and ready to run again with the intention of knocking its world record down a bit lower.

JBhtlcarphotos017_001.jpg

TRADEMEJUNE022_000.jpg

TRADEMEJUNE009_000.jpg

Its next meet will be on the 5th of January at Meremere in NZ, given it will be the first meet with the new setup I wouldn't necessarily expect any records straight off - but I'll be there and will post up results if there are any people interested.

Here is a link to HT's workshop updates:

http://www.htlracing.co.nz/workshop.html

Edited by Lithium
Link to comment
https://www.sau.com.au/forums/topic/199359-heat-treatments-gt-r/
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Ive seen this car run on a very green track at Taupo and i must say it was truely amazing. Considering the car ran 7.67 and 7.77 on such a track, i have the utmost respect for Reece as it was all over the place throughout the entire pass. The front diff. broke at 3/4 track on the 7.77 pass and was a PB (read:on pace for new world record pass) to 1/2 track. All the best to Reece, Kevin and all the crew.

  • 5 weeks later...
Wow,

Bring on new world record boys.

All looks on track for this Saturday. Apparently they have done initial tuning/testing and going by the numbers etc which have been going around, its probably going to go "rather fast" :banana:

  • 1 month later...

Last weekend HT finally got the thing out for a meet without any niggles, and managed a 7.80 @ 182mph on its now getting old slicks. Looks like they are quickly coming to grips with the new setup, should be very interesting when they decide to start winding the power up!!

A 7.8 is pretty impressive for a shakedown run.What is their target 7.0s?

Not sure what their target is - I think they just reckon they can go quicker than they did and would like a mid/low 7. I guess there is the hint that people might be intending on giving them some competition so good to keep it on form haha. Lots of fun seeing it get quicker, nonetheless. Seeing a R32 GTR charge down the track in sub 8s really is a sight to behold, a lot more exciting than your typical tube RWD etc - looks a lot angrier.

  • 4 weeks later...

Hi Guys,

I'm looking for some good pics of the HT R32 to feature in a book. If anyone has some good ones of the engine bay and exterior (preferably on the strip) and would like them featured in a book, then please e-mail or PM me.

I only have a couple of days to get the last pictures together for the publisher ( we are already miles behind schedule), so any help in the next couple of days would be most appreciated.

The book is due to be released very soon and is all about the history of the GT-R, including all the road and race variants. It will be heavily concentrating on the engineering side of the cars, but will nicely feature all the models in good depth.

Thanks in advance people!!

Kind regards

Paul.

  • 8 months later...

The car never made it to Oz obviously, but it finally did some shake downs with its new engine/suspension/wheel & tyre changes last weekend and was straight back in the 7s with plenty more in it by the sounds:

  • 1 year later...

Just for the interest of those that way inclined, the lads seem to have been busy with the new bigger turbo setup and have done some testing at the strip and some suspension/alignment tweaking to get the car down the strip better and one gets the impression that its all heading in a good direction.

Last weekend Reece ran a single full 1/4 mile pass and recorded a 1.19s 60ft time (which is its best on NZ soil) on the way to a 7.8 @ 177mph. This run was done with too much clutch, so there was plenty available power not making it to the tyres - as many here would know the car is capable of >190mph trap speeds when the boot gets really put in so fingers crossed there should be some fun times ahead.

This weekend in the NZ Four and Rotary nationals event, with the drags on Sunday - fingers crossed there may be some interesting results to report for both the Heat Treatments guys and also Robbie Ward who will be racing his RIPS FED, which has to date run a 7.4 but I quietly suspect that it has a bit more in it yet :P

Weather was pretty aweful, they didn't get a clean run in that I am aware of. Fastest time I heard was 8 flat, I ended up getting sick of the weather and left so didn't see any of their runs. RIPS left without having a go, as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 1. I can't see a location on your profile but you do mention GBP so I'll assume you are in UK. In Australia, CBC make a timing belt kit with the gears and idler and tension bearing and that is what I use without any problems. I'm sure OEM or HKS are also fine but I wouldn't pay extra for HKS over anything else. 2. Yes, I would always change the idler and tensioner and the stud and bolt that hold them in. Assuming they were all done last time it is highly unlikely you would have a problem, but they are very cheap to add to the job considering the time it will take anyway.  3. No, you don't need to lock them as such (I think that is more for engines without timing marks), but you should make sure they move as little as possible once the belt is off as you can hit pistons on valves if they move too far. As always, make sure you line it all up to top dead centre with the timing marks aligned before you take the old belt off.
    • How to wreak havoc at a bogans party... Swap out the goon bag hanging from the clothes line with oil bag... Watch chaos ensue during Goon of Fortune....
    • Hey everyone,   I’m looking for some advice on replacing the timing belt on my RB25DET Neo-powered 1998 Skyline. The engine was fully built about five years ago, including a fresh timing belt, water pump, and other essentials. However, since then, the car has only covered around 2,000–3,000 miles. It’s currently making around 650hp.   Even though the mileage is low, I know timing belts have a time-based lifespan too, and most recommendations suggest changing them every five to six years or 50,000 miles. Since I’m at that time mark, I’d rather not take any risks and plan to swap it out soon.   A few things I’d like to hear opinions on: 1. What’s the best belt for this setup? Should I go with an OEM Nissan belt, or is the HKS fine-tune a better choice given the power level? 2. Would you bother replacing the idler pulley and tensioner at the same time, or only if they show wear? 3. When swapping the belt, is it necessary to lock the cam and crank gears in place, or is lining up the timing marks enough? I’ve seen different approaches, and I want to make sure I do it right.   The water pump was changed with the rebuild and isn’t run off the timing belt, so I don’t see a need to replace it again. I just want to make sure I approach this the right way.   Any insight would be much appreciated. Thanks!
    • How does this compare to the internally gated g25-550 in terms of power production at same psi and spool
×
×
  • Create New...