puke22 Posted December 28, 2007 Share Posted December 28, 2007 just finished installing a cooling pro fmic on a 95 r33, there is no nipple in the cooling pipes, what do i do with that line now? the kit included a t piece, and ive read in other installation guides in here what you do, but i dont know what the appreviations mean, or where what is (very new to diy and skylines) "then had to plumb in the intercooler line.. ther is no nipple so i cut the vac line from TB and inserted a HKS T piece (HKS POWAH AND SPORTS)." <---- thats the line im left over with right? if so how do u explain that to some one who.. well doens't know what it means! sorry for the slowness thanks for the help! Link to comment https://www.sau.com.au/forums/topic/199372-new-front-mount-intercooler-nipple-line/ Share on other sites More sharing options...
MMM Posted December 28, 2007 Share Posted December 28, 2007 i just got a nipple welded in much easier Link to comment https://www.sau.com.au/forums/topic/199372-new-front-mount-intercooler-nipple-line/#findComment-3554320 Share on other sites More sharing options...
R33 S2 Posted December 28, 2007 Share Posted December 28, 2007 just finished installing a cooling pro fmic on a 95 r33, there is no nipple in the cooling pipes, what do i do with that line now? the kit included a t piece, and ive read in other installation guides in here what you do, but i dont know what the appreviations mean, or where what is (very new to diy and skylines)"then had to plumb in the intercooler line.. ther is no nipple so i cut the vac line from TB and inserted a HKS T piece (HKS POWAH AND SPORTS)." <---- thats the line im left over with right? if so how do u explain that to some one who.. well doens't know what it means! sorry for the slowness thanks for the help! take a look at this pic. http://www.skylinesaustralia.com/forums/in...t&id=126534 thats where i have mine connected. i went to repco (or most car shops should have them) and bought a screwin brass nipple. took the cooler pipe off and drilled and tapped a thread into it. then used som,e of that white plumber tape too seal it off so it didnt leak. you could also weld around it but mine didnt leak so i didnt bother. search nipple there should be heaps of info on it goodluck steve! Link to comment https://www.sau.com.au/forums/topic/199372-new-front-mount-intercooler-nipple-line/#findComment-3554321 Share on other sites More sharing options...
puke22 Posted December 29, 2007 Author Share Posted December 29, 2007 thanks for the replys, just so i know, what is that line actually for and what does it do? should know what im playing with thanks Link to comment https://www.sau.com.au/forums/topic/199372-new-front-mount-intercooler-nipple-line/#findComment-3555170 Share on other sites More sharing options...
RRob Posted December 29, 2007 Share Posted December 29, 2007 Its the wastegate actuator line. Controls boost. Link to comment https://www.sau.com.au/forums/topic/199372-new-front-mount-intercooler-nipple-line/#findComment-3555198 Share on other sites More sharing options...
FAT_3L Posted December 29, 2007 Share Posted December 29, 2007 i just installed my intercooler aswell and put a nipple after the cooler next to the head but the boost went from 6psi to 9-10psi without touching anything else. is that meant to do that?? Also i had a bov that i took off, what do i do with the line that was going to that,block it off?? Link to comment https://www.sau.com.au/forums/topic/199372-new-front-mount-intercooler-nipple-line/#findComment-3555637 Share on other sites More sharing options...
4door_Sleeper Posted December 31, 2007 Share Posted December 31, 2007 i just installed my intercooler aswell and put a nipple after the cooler next to the head but the boost went from 6psi to 9-10psi without touching anything else. is that meant to do that?? You need to put the nipple after the turbo but before the intercooler Also i had a bov that i took off, what do i do with the line that was going to that,block it off?? Yes - block it off. (or run the line to your new BOV Link to comment https://www.sau.com.au/forums/topic/199372-new-front-mount-intercooler-nipple-line/#findComment-3558151 Share on other sites More sharing options...
da spike Posted January 5, 2008 Share Posted January 5, 2008 Does anyone know where i will be able to get someone to weld the nipple in? Exhaust shops maybe? Link to comment https://www.sau.com.au/forums/topic/199372-new-front-mount-intercooler-nipple-line/#findComment-3564123 Share on other sites More sharing options...
SN33KY_SN33KY Posted January 5, 2008 Share Posted January 5, 2008 a mate of mine told me instead of putting a new nipple on the pipe u could put the line somewhere else near the intake plenum?? has anyone elseheard of this? if so where would it go?? Link to comment https://www.sau.com.au/forums/topic/199372-new-front-mount-intercooler-nipple-line/#findComment-3564167 Share on other sites More sharing options...
typevu Posted January 7, 2008 Share Posted January 7, 2008 Does anyone know where i will be able to get someone to weld the nipple in? Exhaust shops maybe? Take it to a zorst shop - $10 5 minutes done. Link to comment https://www.sau.com.au/forums/topic/199372-new-front-mount-intercooler-nipple-line/#findComment-3567993 Share on other sites More sharing options...
G-Money Posted March 5, 2008 Share Posted March 5, 2008 ok which hose connects to the nipple on the cooler piping after the turbo??? could some circle it on a picture of an rb20 Link to comment https://www.sau.com.au/forums/topic/199372-new-front-mount-intercooler-nipple-line/#findComment-3696158 Share on other sites More sharing options...
TTT Posted March 5, 2008 Share Posted March 5, 2008 (edited) not needed on an RB20. RB20 turbo has the nipple on the front of the turbo (compressor housing). see the vacuum line that goes from the wastegate actuator (the circle thing to the right hand side of the turbo entry) to the compressor cover. RB20's don't use a boost controller valve to control boost. the spring that is in that wastegate actuator is made to keep the waste gate closed for long enough to flow 10psi of air through. then it opens. The RB25 turbo has a standard wastegate actuator spring of 5psi. so they use an electronic valve to increase this to 7psi after 4500rpm or something. so the vacuum line an RB25 goes from the turbo wastegate actuator, to the electronic controler (attached to the suspension tower right in front of the power steering canister, has a blue vacuum line going to it) from there, in a stock RB25, it goes to a nipple on the pipe that goes from the turbo to the intercooler. long story with pictures short... RB20 doesn't need nipple.. Edited March 5, 2008 by GTST Link to comment https://www.sau.com.au/forums/topic/199372-new-front-mount-intercooler-nipple-line/#findComment-3696245 Share on other sites More sharing options...
G-Money Posted March 5, 2008 Share Posted March 5, 2008 so i dont need to make a nipple on my cooler piping??? Link to comment https://www.sau.com.au/forums/topic/199372-new-front-mount-intercooler-nipple-line/#findComment-3696273 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now