Jump to content
SAU Community

Need Help

Rav

By Rav,
in Victoria

 Share

Recommended Posts

Rav Proficient

Rav

Posted
Posted

HEY GUYS,

Just went for alil drive in my R32 GTR and My greddy oil pressure Gauge When i give it boost it starts to go all the way down, I dont think it is my oil pressure that is going down, I think the Gauge is playing up,

Does any one know where i can go to get it checked out.(Thinking it might just be stuffed or a wire lose).

Link to comment
https://www.sau.com.au/forums/topic/199466-need-help/
Share on other sites
260tech Proficient

260tech

Posted
Posted (edited)
HEY GUYS,

Just went for alil drive in my R32 GTR and My greddy oil pressure Gauge When i give it boost it starts to go all the way down, I dont think it is my oil pressure that is going down, I think the Gauge is playing up,

Does any one know where i can go to get it checked out.(Thinking it might just be stuffed or a wire lose).

Only happen when you cane it? If that is the case I'd be a bit cautious if I was you. Don't make the mistake of shooting the messenger friend.

Cheers GW

Edited by 260tech
Link to comment
https://www.sau.com.au/forums/topic/199466-need-help/#findComment-3555472
Share on other sites
Rav Proficient

Rav

Posted
  • Author
Posted
Are you in Bundy, Bundaberg? If so, this is the Victoria section.

If you are in Vic, R.E Customs do an excellent job on forum members cars and I have used them myself. :)

Iam from Bundoora vic, Ok cools if you can send me a pm of there details that be good.

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/199466-need-help/#findComment-3555480
Share on other sites
Rav Proficient

Rav

Posted
  • Author
Posted
If your sure its the gauge (and you'd wanna be, or your highly risking your motor driving it)

Then it'll be either the sender/sensor is dead, or the wire has come off.

Its on the driver side

Just took it around the block before and now iam starting to think its not the Gauge,

Itz more serious:( .

Link to comment
https://www.sau.com.au/forums/topic/199466-need-help/#findComment-3555572
Share on other sites
Rav Proficient

Rav

Posted
  • Author
Posted
You just bought your GTR for cheap?

Normally all R32 oil presure sender are stuff, in your case you've got an aftermarket so best to take it easy for now. I'm pretty sure any Mechanics can just hook up a mechanical gauge to check it out otherwise Ray@RE knows his stuff.

What u mean i just bought my GTR cheap.

Link to comment
https://www.sau.com.au/forums/topic/199466-need-help/#findComment-3555689
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

when the engine is warm check how much oil you have

does the guage drop to zero ? if not, what number?

the stock cluster has an idiot light for low oil pressure so this should come on if in fact the guage is correct and you hit say near 0 oil pressure. make sure your oil pressure warning light works - turn the car to ACC (but dont start it). look for a red oil tin can icon - it should be on. if you can see it - i would expect this light to come with true low pressure

Link to comment
https://www.sau.com.au/forums/topic/199466-need-help/#findComment-3556284
Share on other sites
Rav Proficient

Rav

Posted
  • Author
Posted (edited)

when the engine is warm check how much oil you have

does the guage drop to zero ? if not, what number?

dont realy let it drop to much i back of but it goes down to around 2.

Wouldnt it be beta to check the oil level when it is cold because then the oil just seating there or no, (But the oil level is almost full when it is cold).

Edited by Rav
Link to comment
https://www.sau.com.au/forums/topic/199466-need-help/#findComment-3556409
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

no check the oil when the engine is at operating temp

use the dipstick and check the level of oil in the engine

ok if you dont see the warning light at post diag then it could be dead

so you could in fact have low oil pressure under load

when you say it drops - what rpm does it drop to 2 at?

Link to comment
https://www.sau.com.au/forums/topic/199466-need-help/#findComment-3556497
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • Predator1
      Billet Merge Collector for manifold

      By Predator1 · Posted

      As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • MBS206
      Help Understand GTT Boost Setup

      By MBS206 · Posted

      Re read everything that has been written about this in this thread.. Let us know if you're still confused.
    • joshuaho96
      Help Understand GTT Boost Setup

      By joshuaho96 · Posted

      This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
×
×
  • Create New...