Jump to content
SAU Community

Recommended Posts

These are all the track days I'm looking at next year. Wont do them all but there are plenty of options.

Potentially a busy year...

2008_Track_Day_Calendar.zip

Regards

Andrew

WOW!!

Look at all the PI days!!!

I'm excited...

sorry but i'm quite noob at this, thinking of joining the rest of the SAU members on the trackdays. Can anyone explain the different days.

i.e : Event held by Maserati? PIARC? AROCA?

Cheers

The different days are held by different car clubs and usually have a slightly different format.

As long as you have a L2S cams licence and a member of a cams affiliated club (e.g SAUVIC) you can attend any of these days..

The different days are held by different car clubs and usually have a slightly different format.

As long as you have a L2S cams licence and a member of a cams affiliated club (e.g SAUVIC) you can attend any of these days..

Thanks Jag. But main question was, what club are they? I know the WRX club and Maserati ones, how about the rest? :(

Thanks Jag. But main question was, what club are they? I know the WRX club and Maserati ones, how about the rest? :P

PIARC = Phillip Island Auto Racing Club

ARCOA = Alfa Romeo Clubs of Australia

MSCA = Marque Sports Car Association

:(

thanks for putting that calendar together Andrew, I was hoping you would make one like last year :devil:

With the amount of stuff you have been selling I thought you had pulled the pin and bought a white(maybe beige) camry automatic. :worship:

  • 2 months later...

Hey guys, I have 2x competitor passes to Historic Winton, presented by the Austin 7 Club.. it's on the 24 & 25 May and the passes are for both days...

Sat 24 - Practice 9am, Racing 1pm

Sun 25 - Racing all day from 9am

Any enquiries re Historic Winton can be directed to Noel Wilcox - bigboytoyco at bigpond.com or head to www.historicwinton.org

So anyway who wants the free passes? :D

Let me know,

Cheers!

~Kaz

Winton Raceway - Victoria

9th April - VicDrift Practice Day (Survival meeting)

12 & 13 April - Victorian Motor Racing Championship Round 2 (normally free spectator entry)

26th April - FPV & XR Owners Club Race Day (free spectator entry)

27th April - Tampered Motorsport Track Day (free spectator entry)

11th May - BP Midland Pedders No Bull Sprint Series Round 2 (free spectator entry)

24 & 25 May - Austin 7 Club - Historic Winton

14 & 15 June - Australian Motor Racing Championship Round 4

22nd June - Tampered Motorsport Track Day (free spectator entry)

12th July - Fun Day (free spectator entry)

13th July - BP Midland Pedders No Bull Sprint Series Round 3 (free spectator entry)

20th July - VicDrift State Series Round 3

1 to 3rd August- V8 Supercars Round 8

23-24th August - Victorian Motor Racing Championship Round 4 (normally free spectator entry)

6th September - VicDrift – Practice Day

7th September - BP Midland Pedders No Bull Sprint Series Round 4 (free spectator entry)

20 & 21st September - Performance Car Mania

28th September - Tampered Motorsport Track Day (free spectator entry)

Early October - Australian Historic Motor Festival

25th & 26th October -AROCA SIX HOUR RELAY (free spectator entry)

1 & 2nd November - Australian Motor Racing Championship Round 8

4th November - Tampered Motorsport Track Day – Melbourne Cup Holiday (free spectator entry)

15 & 16th November - Victorian Motor Racing Championship Round 6 (normally free spectator entry)

29th November (Twilight) - BP Midland Pedders No Bull Sprint Series Round 5 (free spectator entry)

6 & 7th December - Ken Leigh Memorial Holden HQ 4 Hour (normally free spectator entry)

14th December - Fun Day (free spectator entry)

20th December - Vicdrift Practice day, (Closed Practice Day)

Edited by Big Trev
  • 4 months later...
link to the calendar isn't working anymore??

got myself an R32 GT-R and an MA61 supra, keen to get them too the track...

It appears when the board moved to a new host, all the attachments died.

I'll upload another copy when I get home from work.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
    • I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
×
×
  • Create New...