Jump to content
SAU Community

Recommended Posts

hey all,

me and a few mates are road tripping to the goldie (from the sunshine coast) on friday and we want to check out car yards that will have skylines.

just wondering if you could all post where they are, as i have no idea, i mean ive seen them but never taken notice.

thanks

much appreciated

dave

Link to comment
https://www.sau.com.au/forums/topic/19962-urgent-please-help/
Share on other sites

ajs between the story bridge and the gabba.

autoshop(where i got mine from) on morroka mile(they dont do deals they ripp you off, and sell not roadworthy cars(not headlight bulbs and no jack for car tyre)

auto salon on loganlea(also sells illegal cars, like different motors and cars)

IVS on logan road, these guys add $10000 to all cars, and the stickers just turn me off. (mainly all hit and drift cars that have crap paint work done)

SVI in virgina(private one www.svi.com.au ) sell cars, and these guys tell you if the cars been hit or not, and they have great deals, I was going to go through them, but wanted the pruple r33 :)

some on high st on the GC(southport) as well.

street machines is ok, but you ahve to look at the prices :)

svi are the best in my opinion, they ahve heaps of mods and will add them cheaply to your machine. Also they tell the truth to you.

some of the prices I had got when I was lookingfor a r33.

r34-GTT with NOS - $32000 sold to a sydeny car dealer for $34,000 12,000kms

r33 gts-25T - 65,000kms(not winded) with sunroof and no dints $19,000

180sx 98 model non turbo $18,000

:rolleyes:

Mate, If you want some prices and pictures email me with the year and model you are after. I buy from a wholesaler and do not hold stock, therefore I can sell cars less then yards, but you are still buying from a dealer. There are only a couple of cars left in Brisbane, but a lot ready to be shipped from Japan - mostly 96 onwards.

93 - from $18,000

96 - from $23,000

98 - from $38,000

If you have any questions email me. [email protected]

Mike

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
×
×
  • Create New...