Jump to content
SAU Community

Recommended Posts

hey everyone i wasn't 100% sure where to post this but everyone on hear are very good and im from vic also so hear it goes: a few days ago i had a little accident and have a huge dent in the bonnet so im looking for a new one at the moment. just today my dad took the car out and came home saying the engine light is on so i go to start it up and it was really rough the whole car was shaking, it felt like a had a huge v8 that wasnt really running well. so i pulled it in and quickly shut it off. now my problem is would anyone have any ideas what it could be because tomorrow is a public holiday and i got to get to work on wednesday so i was hoping it could be maybe a lose plug that would do it or would it be much worse :blink: .

thanks for replying. ok i have a r34 workshop manual it says how to do a diagnostics check but it really makes no sence to me it says to put the keys in to on but dont start the engine and then to put some wires into something to activate it. i tested my car today and checked all the plugs and stuff and they are fine i started it up and it sounded fine but then the whole car starts vibrating really badly and a very strong smell of fuel which could be normal cause it hadnt been started up for a day and a half. its killing me cause im too scared to drive it somewhere in case it is serious or if its just coilpacks.

im from sunbury but i think most people live on the other side of melbourne. it felt like the more the revs slowly dropped the more vibration throughout the entire car. im still thinking coilpacks from what i have read but not 100% sure.

ok guys hear is an update. i just started my car this morning and there was no engine light and it was fine, after a bit i revved it a little then revved it to about 5000 and it dropped normally but then the light came on again but still seemed to idle this time ok without the bad vibration but it did smell really bad of fuel i dont know if this is normal for starting it up in the morning but it was bad.

thanks for your answer i had a feeling it might be but it threw me off that it would vibrate badly and run roughly but then again i suppose they could do that too. plus my car was driving on that really hot day on monday so that could have cooked them as well.

the vibration is the fact that one or more coils/cylinders is not firing at all.....to find out which ones are the culprits let the car idle(when its playing up) and take the injector wires off one by one.....you will find that there will be ones that eitheir make the car stall(the good ones) and one's that dont make a diffrence (the evil ones)

Hey... I've also got a R34 and i had the same problem as you... engine light, SLIP and TCS OFF light would all come on and the car would be shaking.. sometimes the shaking would go away and the lights would stay on.. very very intermittant... and yes it was the coil packs

Now got some splitfires in there and runs perfect :O

im not stupid i know how to look after my car. i have only had it for about 3 months and it had a full service before i picked it up, so im pretty sure its fine, and i do check my oil frequently and coolant and all the rest.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...