Jump to content
SAU Community

Recommended Posts

R32 gtst - RB20 if it makes a difference,

driving along noticed a funny smell like oil or something then all of a sudden stopped at lights i hear it start pissing out, lucky i was near home so just made it back before the engine temp was cooked lol. went to top it up today and it drank about 4 - 5 litres and still wanted more, turned it on to see where its coming from and i cant see the point of origin but its dripping down and coming off the bottom of the gearbox, right under the clutch. dunno what around there would leak cos theyre are no pipes are there ?? anyway i was gunna take it in for its due service in the next few days anyway but now i dunno if its safe to drive it there or if i should get it towed ?

will try get some pics up ASAP, cheers

Link to comment
https://www.sau.com.au/forums/topic/199882-coolant-leak-where-from/
Share on other sites

I think its what they called a Wels Plug,

It sit in the back of the block, designed to expand when too much heat or something like that. Best to tow it to a mechanic and have it replace.

WELSH plug.

They are there to fill up the hole left for expansion when the block (and sometimes head) is cast. Pretty rare for these to go if you are looking after the cooling system. I would go with the general consensus and chase heater hoses first.

is it holding coolant ? if it just all goes down you have kinda a big problem, if it slow leak pressure test it ( iff posible ) will be easy to find out where its leaking from ,

wash whole leaking areas down dry take small drive see if it leaks , take from there

and all the checks other's have mentioned

hope ya find problem

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...