Jump to content
SAU Community

Recommended Posts

Hey all, i have just installed this kkr 480 turbo i had at home. i have found that for some reason even with the actuator rod not connected the car still running boost, i guessing the size of wastegate hole is to small..correct me if im wrong???

has anyone had this problem??

also have i got the kkr430 and maybe this is the problem ?? but im 90% sure its the kkr 480 someone gave it to me so...

cheers.

Edited by rich flavour
Link to comment
https://www.sau.com.au/forums/topic/200257-kkr-480-on-r33/
Share on other sites

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

with the actuator disconnected, the wastegate will never open, which means boost will continue to rise as long as the throttle is open and the engine is ingesting air

this basically means your running unlimited boost - be careful with this - it might go bang.

what spring are u using in the actuator? what boost controller have u got setup?

what exhaust setup do you have? have you checked the actuator / swing valve for play? does the wastegate flap actually open?

Link to comment
https://www.sau.com.au/forums/topic/200257-kkr-480-on-r33/#findComment-3564299
Share on other sites

Hey all, i have just installed this kkr 480 turbo i had at home. i have found that for some reason even with the actuator rod not connected the car still running boost, i guessing the size of wastegate hole is to small..correct me if im wrong???

has anyone had this problem??

also have i got the kkr430 and maybe this is the problem ?? but im 90% sure its the kkr 480 someone gave it to me so...

cheers.

youve gotta get it machined out mate to a bigger wastegate hole and flap MTQ doit or any other turbo place i had to doit to my kkr430

Link to comment
https://www.sau.com.au/forums/topic/200257-kkr-480-on-r33/#findComment-3564303
Share on other sites

i also get the same problem my kkr480 i just had it put back onto my rb25 and i also put on a greddy plenum and last nite i seen 1.46 bar so that cant be good hmmm

b4 the plenum upgrade it was around 1.2bar i would hit...

Link to comment
https://www.sau.com.au/forums/topic/200257-kkr-480-on-r33/#findComment-3564324
Share on other sites

im sellin the kkr setup soon and im selling a real good Greaddy td06h-25H polished turbo with top mount mani and gready dump pipe, if u want this will spool fast n pull very hard all the way unlike the kkr that kickes in way too late on such high boost.. let me know if intersted

Link to comment
https://www.sau.com.au/forums/topic/200257-kkr-480-on-r33/#findComment-3564451
Share on other sites

with the actuator disconnected, the wastegate will never open, which means boost will continue to rise as long as the throttle is open and the engine is ingesting air

this basically means your running unlimited boost - be careful with this - it might go bang.

what spring are u using in the actuator? what boost controller have u got setup?

what exhaust setup do you have? have you checked the actuator / swing valve for play? does the wastegate flap actually open?

The spring on the actuator is factory kkr, exhaust 3inch after market turbo back. i have checked the actuator it functions fine, tryed with 2 diffrent boost controllers one electric the other just a cheap t piece style same resault. i have also tryed with no boost controller does anyone no the least boost you can run with this actuator??

so wastegate hole is to small thats my problem?

Link to comment
https://www.sau.com.au/forums/topic/200257-kkr-480-on-r33/#findComment-3564681
Share on other sites

im sellin the kkr setup soon and im selling a real good Greaddy td06h-25H polished turbo with top mount mani and gready dump pipe, if u want this will spool fast n pull very hard all the way unlike the kkr that kickes in way too late on such high boost.. let me know if intersted

How much you want for this turbo mate? what state you in? how manys k's has it done? and at what boosts? what sorta power can i expect to make at the wheels??

Link to comment
https://www.sau.com.au/forums/topic/200257-kkr-480-on-r33/#findComment-3564687
Share on other sites

i also get the same problem my kkr480 i just had it put back onto my rb25 and i also put on a greddy plenum and last nite i seen 1.46 bar so that cant be good hmmm

b4 the plenum upgrade it was around 1.2bar i would hit...

what do you rev your car out to or you dont flogg it when it isn't running right?

Link to comment
https://www.sau.com.au/forums/topic/200257-kkr-480-on-r33/#findComment-3564693
Share on other sites

limiter is set to 7500rpm im pretty sure, but since plenum upgrade and car hasnt been tuned, ive lost alot of down low and turbo comes on really hard bout 5000rpm and then goes straight to limiter...

sounds gay if the boost range is 5000 to 7500rpm is it evan worth it?

Link to comment
https://www.sau.com.au/forums/topic/200257-kkr-480-on-r33/#findComment-3565729
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes. It's either "2 wires", or 1 wire, depending on how you look at it. It is the connection that ties the battery -ve to both the chassis and the engine. Every electron that goes in or out of the battery goes through those 2 small spots (on the inner guard and on the engine block). If those are not clean and tight, then shit starts to suffer. Yeah, but measure it again cold in the morning, after it has had hours to rest. You can't usefully test the charge state of a battery immediately after it has been running because the alternator puts a surface charge onto the plates that takes a while to soak in and balance out. It will always read higher, and potentially look properly healthy, when fresh off of charge. But hours later it can look a lot less healthy. It's also worth measuring the battery voltage while cranking, although this can be difficult with a typical DMM because the screem update rate is so slow on most of them. An analogue voltmeter is actually a better tool for that. If the voltage drops too far while cranking, it is a sign of a poor battery. Although I don't think we're necessarily looking for a weak battery here - just wanting to exclude it.
    • https://www.facebook.com/share/15ZMn5oXtc/ Updated Event (so its not private and can be shared easier)  Attempting to coordinate a big push of Stagea's to this years GTR Festival. Great event last year and hoping for the same this year.  Discounted tickets 20% off for their various tickets until the 3rd of Feb Monday. Drags, show and shine etc.  I've emailed them to ask to set a location aside for the Stageas for the show and shine - they are happy to do so if we can get them numbers, I'm happy to keep track of that. Entering as Nismo category.  I'll be road tripping up from Melbourne, would be cool to convey if people are interested, maybe there is SAU convoys from each capital? If you have ideas about that let me know.  https://gtrfestival.com.au  
    • Does have series 2 airbag steering wheel and passenger side airbag also.
    • Do I have a series 2 or has someone spent money to have a series 1/1.5 look like a series 2? Everything I have read says the series 2 came out in 1996. I have a car manufactured in December 1995. The exterior, engine and interior are all series 2 other than the dash facia is series 1. Paint code is also kr4 that I believe is only available on a series 2. I have a VX Vehicle History Report and it says Grade: GTS25T TYPE M2 Manufacture date: 1995-12 Make: NISSAN Model: SKYLINE Body: E-ECR33 Grade: GTS25T TYPE M2 Engine: RB25DET Drive: 2WD Transmission: F5
    • I went to Repco to get them to test the battery using their tester (not a volt meter), alternator shows 14.3v when running, and when the car was off after the it was on full load I think it was 12.6v but the guy said it was all good. Terminals are all clean, no corrosion. Though I coulda sworn when I tightened up my alternator belt the car idles a bit higher and the steering wheel shakes a bit until it's warmed up. I wanted to confirm for the earth cable/s, are you referring to the 2 wires that are bolted onto the frame rail under the battery? I might be overthinking this a bit.
×
×
  • Create New...