Jump to content
SAU Community

Recommended Posts

Hey guys,

My turbo is making weird noises.

Like rattling hard when first started, i think its from the rear of the turbo.

I think its the waste gate not sealing?????

When car is warm i dont hear it, and under boost no noise.

I think my turb is stuffed, been on the bee*r a bit :)

Standard 25 turb on rb20 internal gate with dump pipe.

Link to comment
https://www.sau.com.au/forums/topic/200501-rattling-turbo/
Share on other sites

you could try and undo the two bolts that hold the wastegate actuator onto the turbo and see if there is enough play in there to close the gate fully, otherwise just slightly bend the actuator rod until and wastegate flap is fully closed.

Link to comment
https://www.sau.com.au/forums/topic/200501-rattling-turbo/#findComment-3567893
Share on other sites

Thanks mate, will go have a squiz tonight.

Hopefuly not 2 much of a drama...

Just need it going till my engine build is over.

What would be the cause of this? and if i continue 2 drive her will it start fkin sh!t up?

Link to comment
https://www.sau.com.au/forums/topic/200501-rattling-turbo/#findComment-3568689
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
    • Evening all. Got this odd issue with my R34 GTT. If I let the car idle for around 15 seconds or more (even when cold) and I jab the throttle a bit, a decently sized plume of blue/grey smoke comes out the exhaust. Doesn't smoke when idling alone, just when giving it some gas after idling. No smoke on cold start or from what I know, normal driving. Not 100% sure about smoke on decel but I don't think there's any. Any pointers on what I should start doing to troubleshoot it? Or if anyone has experienced the same I'd love to get some insight. Cheers.
×
×
  • Create New...