Jump to content
SAU Community

Rda Rotor (& Ebc Pads) Group Buy Is Back In 2008!


Recommended Posts

no wanted to get GTR sized rotors and use adaptors for the calipers to suit.

Is this a good idea or should i just stick with the OEM size?

Can i get an full GTR kit put on the car (line, rotors and calipers) withouth too much trouble?

  • Replies 548
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

early r32 gtr 89-93 uses 296mm front. same with r33 gtst but thickness or hat height is different. so will need to check dimension if you're keeping ur gtst caliper I'll have to get you the same rotor thickness otherwise your caliper may not fit it in.

the group buy is oem size, if u want an upsize I can get u gtr size (after new year) but u'll have to custom fit it yourself, local brake mechanic (get a good one) may be able to fabricate some adapters etc.

Just Jap sell the adapters if you want something "off the shelf".

  • 2 weeks later...

Hey,

Can you PM me a price for standard slotted to suit R33 GTS-T front and rear, and EBC pads to suit, however I don't know the difference in the colours?

Will be in for next round!

Cheers,

Matt

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...