Jump to content
SAU Community

Recommended Posts

With a shorter range of motion your goin to really give your quads a flogging as you can go heavier..

the deeper you go the more you get your a$$ involved

i use to think i couldnt physically go any lower but i tried doing it with lighter wieght.. Sh!t i went back to just doin 40kg squats so i couild learn to do it properly again

it takes some getting use to but will be better in the long run...

With a shorter range of motion your goin to really give your quads a flogging as you can go heavier..

the deeper you go the more you get your a$$ involved

i use to think i couldnt physically go any lower but i tried doing it with lighter wieght.. Sh!t i went back to just doin 40kg squats so i couild learn to do it properly again

it takes some getting use to but will be better in the long run...

Weight or no weight, I mean it quite literally when I say I can't squat lower, at least not without spreading my knees further and leaning forward, which would be horrible for your back.

yeah just need to work on your mobility... hips/hams etc too tight... your only slightly above parallel, not everyone can drop their ass to grass straight away

technique wise concentrate on looking up and really pushing your chest out... first motion is to hinge at the hips and thrust your ass out backwards before you start bending at the knees... your doing pretty good though... just don't rush the set, you look to be in a bit of a hurry

Trozzle - Ghosty gave you the exact advice you need.

camera angle or whatever is crap.

that is not a proper squat.

Nick has given you the reasons why you can't get any lower..

other than that..

You are loose - either that weight is too heavy for you (which it would be if you get to proper depth) or you don't know how to brace yourself.

Take a much deeper breath in and hold it before you go down.

Spreading your knees out is fine.

so is leaning forward some more.

Instead of the bar going up and down in a straight line, it is going in an "S" shape as you wobble your way trying to find depth.

search for "goblet squats" on youtube and do those any chance you get to help with flexibility/mobility to help get in the hole properly.

Shoes - what are you squatting in? if sneakers - get rid of them..

if you have a pair of Converse All stars, squat in those.

www.mobilitywod.com is a great place to learn about mobility.

I'm willing to bet that you have shit flexibility in calves, ankles, hamstring, hips and butt.

Those half squats you are doing are going to cause you knee problems as you add more weight to the bar.

You are not built any differently to anyone else (except tanlges since the poor kunt doesn't have knee caps) so instead of saying I can't get any lower, find out what you can to fix it.

When you bench press, do you lower the bar till it touches your chest, or do you go halfway and back up?

When you do curls, do you go curl half way up then bakc down or all the way up?

No different for squats.

Just a suggestion, maybe try doing dumbell squats side by side and see if you get a better ROM out of that. I can take this movement ass to ankles and my flexibility is not great. Given there's less to worry about with balance / core strength compared to normal squats, it may help to reveal whether your issue is in technique or flexibility? They still work the quads and glutes plenty...

Give front squats a go.. start light, like really light

How are you supposed to hold the bar? I've seen people either cross their arms or have their hands under the bar, both of which are stupidly uncomfortable.

either or, when using the crossing of arms method make sure you sit the bar on the meaty part of the shoulders

with the wrists are under the bar u need to get some flexibility in your wrists

either way suck it up :nyaanyaa:

How are you supposed to hold the bar? I've seen people either cross their arms or have their hands under the bar, both of which are stupidly uncomfortable.

Like this :P, another vid from the vault, again full range of motion - it is paramount.

http://www.youtube.com/watch?v=DuYn6hXuFkk

Edited by GHOSTrun

You're best to do it in front as your more prone to shoulder injury doing anything behind the neck. That's not to say you shouldn't do it behind your neck, but the muscles worked for both ways are almost identical so I would take the form that is less prone to injury :thumbsup:

As Dan said, people can be more prone to injury doing behind neck. However, the actual occurrence of this when done properly is very low. I've been doing it behind neck for years and years without issue. The key is to get your technique and flexibility downpat, before you start stacking the weight.

I do prefer behind neck because it's more focused on the delts and your chest muscles are less likely to get involved in the motion, compared to front. I see a lot of people struggling on the last couple of reps when doing it in front, leaning back to activate the chest muscles, which probably isn't terrific for your back and becomes closer to an incline press. Behind neck on the other hand is much more strict and forces your shoulders/tris to do the work. Keep a straight back, push your chest out, keep the bar flat and bring it all the way down to your neck. One leg out front with knees slightly bent will make it easier on your back too.

More important than in front or behind, is your width of grip on the bar IMO. Closer grip = more triceps, wider grip = more shoulders.

Finding good form for Deadlifts (without kneecaps, with popping patella tendons) sucks! Trying to find a happy zone.

Split 2x callus's yesterday/today - going to have to purchase some "softcock" gloves :/ Really effected todays workout.

20th session completed in 40days since starting (including Xmas+NY gym closure, plus half week off with bad back after moving house), thats good I feel. Average would be 90mins per session. Noticing that Im leaning out a bit (loss of flab) and have definitely gained decent strength.

In a few weeks time will setup a split routine as I'll probably only have a little over an hour to workout @ 6am prior to Uni classes.

Edit: started taking Scivision Xtend yesterday, 2 scoops in 1Lt water taken throughout the workout. No problems with energy levels. eating v.healthy meals too :) happy with that. Every good workout / every good meal is like a $$ in the bank - in a year from now will be a good investment.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...