Jump to content
SAU Community

Recommended Posts

TM7GTR: Will take the shoulder feedback on board - cheers.

Trozzle: The gym has a machine that you can use your legs separately or can be used pushing both legs together or each leg alternating. You load the free weights onto the machine for each leg. Can be used as a press but ensures each leg pushes the same amount: just not as declined as the normal press machine.

I mentioned I pushed out 140kg x5 freeweight squat a few posts ago ya big girl!

I don't want to offend Trozzle, but if you're not going to squat below parallel you may as well just stick to leg press.

From the last video you put up of your 120kg squats they were all high, so I'm pretty certain these 140's you claim will also be high..

I don't want to offend Trozzle, but if you're not going to squat below parallel you may as well just stick to leg press.

From the last video you put up of your 120kg squats they were all high, so I'm pretty certain these 140's you claim will also be high..

Nah that's cool man, I had never had anyone with me to critique/correct my technique until I recorded that. Since then I have always done squats with my mate, and initially dropped the weight back to an easy 80kg then ensured that every squat was at least parallel from there on.

I don't go below parallel as when I do with anything over 100kg my left knee goes all weird and has a worrying ache immediately afterwards. Going to parallel with any weight feels perfectly fine though, so I do go parallel with 140kg

What's wrong with squatting to parallel?

Nothing, my comment was about the 120's which were higher that's all.

I don't go below parallel as when I do with anything over 100kg my left knee goes all weird and has a worrying ache immediately afterwards. Going to parallel with any weight feels perfectly fine though, so I do go parallel with 140kg

Hmm doesn't sound good :unsure:, well unless you address it I guess all you can do is work around it like you're doing :thumbsup:

Edited by GHOSTrun

Nothing, my comment was about the 120's which were higher that's all.

Hmm doesn't sound good :unsure:, well unless you address it I guess all you can do is work around it like you're doing :thumbsup:

It's undoubtedly nothing since I don't get anything similar when doing any variation of leg press, but yeah better safe than sorry.

What's wrong with squatting to parallel?

There's nothing wrong, although some studies have shown that the full depth squats cause the knee joint to lubricate with synovial fluid more efficiently. I guess this way if you were to fail at parallel and drop beyond, the knee is well prepared rather than the muscles giving up completely at this "sticking point". The other issue would be reduced flexibility in the hip flexors.

There's nothing wrong, although some studies have shown that the full depth squats cause the knee joint to lubricate with synovial fluid more efficiently. I guess this way if you were to fail at parallel and drop beyond, the knee is well prepared rather than the muscles giving up completely at this "sticking point". The other issue would be reduced flexibility in the hip flexors.

On the flipside consider the possible injuries caused by the direction of force being applied to the joints when beyond parallel. The force is now no longer compressing the joint, it is in a small way attempting to separate it.

your calves and hams will prevent it from "separating" as you call it.

parallel or full squats is a huge argument not worth opening.

Especially since this is not about someone looking for 3 white lights after squatting to show it was below parallel and competition legal.

if you are to look at it from a "training" point of view, when doing bicep curls, do you curl the bar from your thighs up to mid point and call it a rep or do you curl till forearm and bicep meet?

squat to parallel will give your legs a workout, but if you have the flexibility (which with stretching and mobility work 99% of people without a birth defect or fused joint due to an operation could get) then squatting to full depth where your calves and hams prevent you from going any lower will build strength and muscles that half squats can't.

look at some old school photos of the greats squating.

Arnie

arnold-squatting.jpg

Dave Draper (Pic title says tom platz but it's not)

tom-platz-squat.jpg?w=400

Tom Platz (I'm sure you've seen his legs)

tom-Platz-520x285.jpg

Anatoly Pisarenko (you may not know of him)

071210_pisarenko.jpg

totally agree... however for some people it takes some serious practice to get that low correctly... not as easy as it looks!

the olympic lifters make it look so effortless... was watching the 48kg girls C&J 100kg+ above their heads... serious reality check for anyone who thinks they're strong

Everyone post their chest workouts. Mine is years overdue for a change, only problem is apart from bench (flat/incline/decline) and flys, there isn't a whole lot more that can be done.

Not that it's going to change anything body composition wise on me, but I'm too stubborn/stupid to accept that

Looking at that pic of Arnie, his lower back (will, the whole thing really) is doing exactly what I though you weren't supposed to do :/

Not everyone is text book.

depends on your body and flexibility.

example.

this is NOT how you should deadlift (in general)

but the man deadlifts over 400kg

Some people are stronger in a certain position than others.

if Arnie can/could squat more with his upper back rounded and kind of rolling forward, then that suits him.

most of us mortals should look at doing it with good form to prevent injury

back injuries suck

take my word for it.

Everyone post their chest workouts. Mine is years overdue for a change, only problem is apart from bench (flat/incline/decline) and flys, there isn't a whole lot more that can be done.

Not that it's going to change anything body composition wise on me, but I'm too stubborn/stupid to accept that

Dezz - I tried smolov jr for 3 weeks.

google it.

Everyone post their chest workouts. Mine is years overdue for a change, only problem is apart from bench (flat/incline/decline) and flys, there isn't a whole lot more that can be done.

I find that pressing doesn't really hit my chest at all... I get much better chest involvement when I'm moving weight across my body... so flyes and 'power flyes'... that said the best chest pump I have ever experienced is from doing the below exercise with cables rather than free weights... not sure why, maybe the constant tension? I find if you focus on bringing your hands together at the end, really flexing your chest and holding it for a second it works really well

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
×
×
  • Create New...