Jump to content
SAU Community

Recommended Posts

GymQuip in Fyshwick sell chalk. It's cheap as hell. I work there.

Prepare for stalking and eventual harassment.

The next 2 weeks CANNOT GO QUICKLY ENOUGH. I so desperately want to get back into deadlifts, squats, and leg press. It's extremely demotivating right now, I actually have very little interest in going to the gym to hit any kind of pull/back exercise. I serious miss the feeling you get through every muscle in your body from deads.

f**k.

It's been about 4 weeks since I did them last (which put me out of action big time) and probably 3 weeks prior to that since doing them properly. I'm feeling really good with absolutely no pain in my SIJ since I hit the Voltaren 25s (cheers Tolga), I've had plenty of rest and avoided absolutely anything that puts too much load on it (inclusive of seated rows, which I have been doing with 1 hand and half the weight as a result).

Is it worth giving them another shot now, and obviously going easy (like, 80 - 100kg MAX)? I'm effectively unemployed at the moment so I need not worry about not getting enough sleep to recover, since I really don't need to get up early for any reason short of a job interview.

Thoughts? (yeah yeah yeah, internet advice)

Why not go even lighter and just test the waters with 10kg more each sesh?

Gotta agree about deads, I just switched from SLDLs to regular deads and the difference is huge. I can maintain my grip for longer now, as per touching the ground for grip rest vs keeping bar in the air the whole time, but I'm a lot more screwed by the end of the set!

Yeah in hindsight I should probably start at 60kg 3x10 reps and leave it at that, then next sesh 70kg so on and so forth.

I'm just hoping to hear simple thoughts from Tolga or even Markos if I were so lucky given powerlifting (and subsequently related injuries) are what they'd deal with day to day.

f**k "professional" opinions, they're always "stop lifting indefinitely coz that's all I can say without risking being sued"

Troy.

Now that you are back pain free, here is my advice from personal experience.

Stretch and massage.

stretch hamstrings, butt, hips, lower back, hip flexors, IT Band, calves.

Massage all of the above.

Most sports shops now sell Foam rollers (google image will show you what they are.. essentially a large pool noodle but made from tougher stuff)

youtube has plenty of vids for all the stretches and how to massage all of those areas using the foam roller

A cricket ball (or any other hard ball) is also handy for massage.

If you want to lash out, go get an hour of remedial massage.

I will also suggest a heat pack

cost about $25 from chemists

1 minute in the microwave and put it on the floor, and lay your lower back on to it.

lay there for 2 minutes, then start stretching.

anyway, once you do a bunch of stretches, go to a bar bell with no weight, and go through the motions (slowly) of a stiff legged deadlift.

get that stretch in the hamstrings some more.

add 10kg, repeat etc etc.

First session just do 3 sets going up by 10kg.

do like 10 - 15 reps

stretch and go home.

Repeat every second day.

when you are at home or work, when you can, stretch all or as many of the above as you can.

like 3-5 times a day or more if you can.

this will be your best bet to come back with little to no pain and eventually work back up to where you were.

I'm about 4 weeks ahead of you at the moment.

it's shitsville but it's pain free.

I plan on giving sumo deads a go this time round to see if it puts my back in a more stable/comfortable position while lifting.

I've got a bunch of stretches which I find works best for me and I'm sure you'll find your own.

Good luck

I do alot of Romanian Deadlifts,

A couple of form videos I have seen show the bar being picked up and then not returned to the ground to completely restart the lift cycle.

Is this correct ?

From what I understood it was called a deadlift because you start wit the wait from dead IE no potential and lift it from there, and then back down and start again ?

There's a hundred ways to do deadlifts; no hard and fast rules about technique besides keeping your lower back straight / no arching. You don't have to touch the ground, I never did with SLDLs because my legs are too long and it would have arched my back...but seems to me with normal deads, it will allow your hamstrings and quads to reset into a starting position...so potentially a better range of motion for the not-so-flexible?

Thanks heaps for that write up Tolga, very much appreciated! I'll get into it all right away :)

In a twist of irony, I could almost swear I've caused this injury by focussing TOO MUCH on my lower back technique. lol

I find a hot water bottle better than a heat pack because they hold heat a lot longer... also in the shower put the hot water on your lower back and stretch your hammies... or just soap up and touch yourself, you know, whatever floats your boat lol

I deadlifted yesterday... lower back is FRIED today

I always reset my reps on the floor, no bounce... unless I'm doing speed deads, then its just a touch and go... trying to hang onto heavy deads without resetting them on the floor always makes me fall forward and makes it really hard to hang onto the bar

Troy, I'll stick to giving advice in the powerlifting thread mate, though I'll continue to read this one for a giggle

My area of expertice is making people big and strong, clashes with a lot of the advice given in here

As birdy pointed out, not everyone wants be strong

I figure if you visit the PL thread, you seek strength, I cant get it wrong then

In this thread, aside from a few, I have no idea who you are or why you lift, so my advice might not suit

Edited by markos

Troy, I'll stick to giving advice in the powerlifting thread mate, though I'll continue to read this one for a giggle

My area of expertice is making people big and strong, clashes with a lot of the advice given in here

As birdy pointed out, not everyone wants be strong

I figure if you visit the PL thread, you seek strength, I cant get it wrong then

In this thread, aside from a few, I have no idea who you are or why you lift, so my advice might not suit

yeah that's a fair call mate, no worries. Once I'm back up to speed with my deadlifts and squats, then I'll seek the advice you have :D while ultimately my goal is entirely cosmetic (aesthetics braaaaaah lol) I would like to be able to squat and deadlift greater than 2x bodyweight, and I have no doubt at all that I can do it.

Strength is an awesome by product of what I'm after, unfortunately my goal will somewhat limit my strength potential.

troy, i read an article in Men's Health yesterday about The Wolfman from the NRL and his rehab after he cracked a vertebrae in his neck. He said that in the gym he started off lifting real light weight but did it really slowly. Apparently its a real good way to come back from injury. Might be something to consider.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
    • @KinkstaahKrinkle paint the "silver" alloy, not the red filter frame Engine bay heat won't be a issue worth worrying about as the silver alloy blocks it off on 3 sides, as for the top, the bonnet seals most of it and the big OEM CAI intake snorkel is still fitted in its original position  I will head into Clark's Rubber when I have some time to grab some pinch weld to tidy up the alloy after I paint it As for performance, I honestly wasn't expecting any, the only reason I got it is because the intake noise sounds cool to my old ears when I'm feeding it the beans Sometimes it's the silly things you do in in life that gives the most fun, and I do love anything that makes cool car noises In other news: I survived 4 nights at sea with Jackie not throwing me over board, holidays are continuing now as we are currently chilling at the Beachcomber in Toukley, after taking the coast roads from Sydney in the MX5, top down all the way, Toukley is where I spent a good deal of my youth holidaying during the summer months, there's lots of reminiscing going on,  and lots of beaches and old houses to visit Next on the list is to head to Batemans Bay for a few days, but we will take the Commodore out to stretch its legs, then Commodore hasn't really moved for months
    • There’s probably people who’d like to do it and then when it comes to putting their hands in their pockets they’ll all disappear into the shadows 
×
×
  • Create New...