Jump to content
SAU Community

Recommended Posts

Interesting looking through those figures for the main lifts.

Close friend of mine is about 90kg

BP 175kg (new PB tonight)

DL 220kg (last I heard before he screwed his back)

SQ ???

Would have to double check with him on his dead and squat figures, but the interesting thing in posting these results up is that he doesn't do any strength specific programs, nor has he ever done so.

In other words, he does bodybuilding-type training but still lifts big.

Some people are just genetically gifted with muscle insertions etc that allow them to be absolute animals in the gym no matter what. Exhibit A would be everyone that trains at Markos' gym... But they also train hard and make the most of their genetic predisposition.

That's a huge bench for that deadlift lol.

You can get strong without it being your goal or focus - it's just the byproduct of a) working hard at the gym with the right exercises, b) eating lots and c) resting sufficiently. People who aren't getting stronger tend to lack one or more of these (whether on purpose or unintentionally). And yes, as Mitch said, some people are just genetically set up to be strong...like the Maori guy who sits on the bench next to me and pushes out 140x10 without taking a breath. Bastard looks like he's been training for 3 months :/

The end goals of bodybuilders and lifters might differ, but the core methods for getting there are much the same. Plenty of bodybuilders lift big numbers...even training specifically for hypertrophy; you don't get that sort of mass without lifting big (insert Ronnie Coleman vids here). And your mate is still doing the big 3 that lifters focus on in their strength programs - no matter how you do these, you're going to wind up with some strength. Isolation/assistance exercises, popular with bodybuilders, can definitely help with the lifts too.

Most of the bodybuilders that lift big numbers started out powerlifting i.e. ronnie coleman, johnnie jackson, franco columbo, even old arnold was weightlifting and powerlifting before he went into bodybuilding. And this is only a small handful ;)

No offence to your mate, but a gym lift is MILES different to a comp bench.

I had a guy telling me who could bench 165kg at his gym. I invited Simon to PTC to show me. He missed 140kg.

He started training with us and eventualy benched 170kg

To give you an idea the 90kg WR open men bench with GPC is 170kg. At WPC its around 227.5kg by Greg Doucette

thats because of the epic pause they make you take with the bar on your chest in comp isnt it?

It's a combination of a few things, until you've competed you don't understand the different pressures placed on a lifter in comp compared with the casual-esqueness of lifting in training.

( ^ that, and some people just talk complete shit about what they can lift)

Edited by GHOSTrun

If he can bench 175kg he can bench 175kg. Why the need too put PTC and official power lifting comps above everyone/all else?

May be hard to believe, but some people do not want to be power lifters. (and I'm not just talking about weak people)

If he can bench 175kg he can bench 175kg. Why the need too put PTC and official power lifting comps above everyone/all else?

May be hard to believe, but some people do not want to be power lifters. (and I'm not just talking about weak people)

Gym lifts don't mean shit. Olympic Jnr lifter Pat Mendez snatched 207kg in training, his best snatch in official competition is ~170kg'ish. That's a HUGE difference.

Like I said in the post above, until you actually compete, you don't understand, and there's no point trying to argue the point because if you haven't competed you simply don't know.

Gym lifts don't mean shit. Olympic Jnr lifter Pat Mendez snatched 207kg in training, his best snatch in official competition is ~170kg'ish.

How can it drop 37kg ? If the bar is the same Etc what is the difference?

Gym lifts don't mean shit. Olympic Jnr lifter Pat Mendez snatched 207kg in training, his best snatch in official competition is ~170kg'ish. That's a HUGE difference.

Like I said in the post above, until you actually compete, you don't understand, and there's no point trying to argue the point because if you haven't competed you simply don't know.

No what you don't understand is he still bench pressed 175kg (assuming he did).

He didn't say he bench pressed 175kg to whatever federation standard you guys lift under, he just beched 175kg. I'd love to hear you tell the guy at my gym that I see consistently bench pressing 170-180+kg that he hasn't benched 180kg because a judge didn't say he has.

I'd love to hear you tell the guy at my gym that I see consistently bench pressing 170-180+kg that he hasn't benched 180kg because a judge didn't say he has.

Take a video and post it up otherwise it didn't happen. I'll give you one week to do so otherwise you will forever be known as a shit talker on this forum.

How can it drop 37kg ? If the bar is the same Etc what is the difference?

I'll let Markos explain, he's had much more experience with comps + lifters than me so his answer will be more accurate.

I've only competed a handful of times, and contrary to what I'm saying about gym lifts, most of my PB's have actually been done in comps, but it's definitely a different feeling to lifting in the gym, way out of your comfort zone which can make a huge difference. It's also why Markos runs so many comps through the year so his lifters have ample opportunity to get experience.

Edited by GHOSTrun

Take a video and post it up otherwise it didn't happen. I'll give you one week to do so otherwise you will forever be known as a shit talker on this forum.

Do you really think he cares what some guy on a forum thinks?

I've seen him do it, and he knows he's done it because he was under the bar when he did it. Nothing else matters

Do you really think he cares what some guy on a forum thinks?

I've seen him do it, and he knows he's done it because he was under the bar when he did it. Nothing else matters

My post was nothing to do with him, it's about your credability. You've got to understand that on the internet it's very easy for people to talk shit, we've all seen it before, so if you want to be taken seriously you have to provide some proof otherwise you're just another mo-mo dreamer waste of dots on the screen.

It's ok if there isn't a guy at your gym benching 4 plates just say so and we'll move on...

Edited by GHOSTrun

Lol if that's your attempt at 'trolling', you'll need to try harder (or not at all would be my suggestion)

You've got tickets on yourself if you think I'm worried about whether or not you think I'm credible.

Not sure what I'd have to gain by lying about SOMEONE ELSE'S figures whom I don't acrually know

I'm not going to film him because a) I don't know him and b) I'm pretty confident that I can say on his behalf that he couldn't care less about whether or not you believe he has benched 180kg.

Just to stir the pot ha ha......but, I used to be able to raw bench 175kg (spotters /no belt), squat 235kg (no belt /no spotter) but, I never competed, was a snick over or under 90kg. The thing is that the PB's were on the days the stars aligned and I trained by myself alot with no pressure. I experienced plenty of days when I was a fair whack off the PB and can only imagine how nerves would play a part in a comp.

Seeing or hearing about big lifts can be inspirational. There's no point calling BS unless someone is claiming personal hero status or a record ( since I stated the above I can cop the BS tag if people think I deserve it). I think more constructively it's better to ask ' what do you need to do to get to a big weight on bench?' There seems to be more point to that.

10yrs have past and I am out of shape. However, I still remember what I would need to do to get strong again on those lifts (though at 40 I wonder if I could beat them). The first thing I would do is get to a gym with some powerlifting people in it,as I know the benifit from coaching on lift tech, apart from the diet, it determines how limited you will be in long term progress.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I think the concept is highlighting the various scenarios where thicker oil helps, and thicker oil potentially doesn't help and only generates heat and costs power, in turn for safety which isn't actually any safer (unless you're going real hot). If anything this does highlight why throwing Castrol 10w-60 for your track days is always a solid, safe bet. 
    • Jason should have shown a real viscosity vs temp chart. All the grades have very little viscosity difference at full operating temperature.
    • Oops... I meant to include the connector  view... BR/W - power from fuse L/W - motor negative to fan control amp (and off to HVAC pin19) OR/B - PWM signal (from HVAC pin20) B --  ground  
    • Yep, if you are applying filler it sounds like there is something wrong with the body lol. Safe to assume there is going to be a lot of sanding going on if your still applying fillers.  Picture a perfect bare metal panel, smooth as glass. You lay down your primer, it's perfect. (why are you going to sand it?) You lay down the colour and clear, it's perfect. No sanding at all took place and you've got a perfectly finished panel.  You won't be chasing your tail, sounds like you were prepping to start laying filler. If your happy with the body after the sanding, there is some bare metal exposed and some areas with primer, no issues at all, start laying the filler. You are safe to lay filler on bare metal or primer (of course check your technical data sheet as usual for what your filler is happy to adhere to).  This isn't a 100% correct statement. There is primer that is happy to adhere to smooth bare metal. There are fillers that are happy to adhere to smooth bare metal. Just make sure you're using the right materials for the job.  Typically if you are using filler, you would go primer, colour and clear. I've never seen any instances before where someone has laid colour over body filler (maybe this happens, but I haven't seen it before). So your plan sounds pretty normal to me. 
    • I don't think there's any way someone is push starting this car.. I honestly can barely move it, and moving it and steering it is just flat out not possible. I'm sure it is, but needs a bigger man than me. I have a refurbished starter now. The starter man was quite clear and consise showing me how nothing inside a starter really should contribute to slow cranking, and turned out that for the most part... my starter was entirely fine. Still, some of the wear items were replaced and luckily it didn't show any signs of getting too hot, being unfit for use, etc. Which is 'good'. I also noticed the starter definitely sounded different, which is a bit odd considering nothing should have really changed there.... Removed and refit, and we'll pretend one of the manifold bolts didn't fully tighten up and is only "pretty" tight. GM only wants 18ft/lb anyway. I also found a way to properly get my analog wideband reading very slightly leaner than the serial wideband. There's Greg related reasons for this. The serial output is the absolute source of truth, but it is a total asshole to actually stay connected and needs a laptop. The analog input does not, and works with standalone datalogging. Previously the analog input read slightly richer, but if I am aiming at 12.7 I do not want one of the widebands to be saying 12.7 when the source of truth is 13.0. Now the source of truth will be 12.65 and the Analog Wideband will read 12.7. So when I tune to 12.7 it'll be ever so slightly safer. While messing with all of this and idling extensively I can confirm my car seems to restart better while hot now. I did add an old Skyline battery cable between the head and the body though, though now I really realise I should have chosen the frame. Maybe that's a future job. The internet would have you believe that this is caused by bad grounds. In finding out where my grounds actually were I found out the engine bay battery post actually goes to the engine, as well as a seperate one (from the post) to the body of the car. So now there's a third one making the Grounding Triangle which is now a thing. I also from extensive idling have this graph. Temperature (°C) Voltage (V) 85 1.59 80 1.74 75 1.94 70 2.1 65 2.33 60 2.56 55 2.78 50 2.98 45 3.23 40 3.51 35 3.75 30 4.00   Plotted it looks like this. Which is actually... pretty linear? I have not actually put the formula into HPTuners. I will have to re-engage brain and/or re-engage the people who wanted more data to magically do it for me. Tune should be good for the 30th!
×
×
  • Create New...