Jump to content
SAU Community

Recommended Posts

165...somebody stop me! Head started spinning as soon as I locked it out :S

Gotta run out of steam soon; at this rate I'm adding 10kg per week.

170kg. Was a fair struggle to get it up and lock it out. I did it straight after the deadlift challenge, so that no doubt made things tougher. Regardless, I'd say I'm pretty close to a 1RM plateau. But nothing 2.5kg increments and increasing the weights on my working sets won't fix :)

Birds, warm up is no doubt important, but there's plenty of research out there to show that static stretching reduces strength/power. So it's probably better to dynamic stretching or just stick with stretching in the movement with progressively heavier weights.

bit too general about claiming static stretches reduce strength. That chestnut is wheeled out all the time.

I static stretch I don't find myself becoming a feeb., quite the opposite. They are needed to help keep alignment in posture and position for lifts in my case. As you get stronger it's good for those like me who use it to get the ROM and alignment in check. Hard training sometimes has me stretching for days in the area effected. I am not trying to have ever increasing ROM , just reach the right amount for position and lift.

He is talking about static stretching right before you are training. When you static stretch, you reduce the blood flow to that area. This is obviously not a good thing right before you are going to load the muscle.

I do lots of static and pnf stretching, but at home, when i have an hour to do it properly. Cause you will be bloody sore if you stretch properly, and you need time to do it.

You don't need your muscle to stretch any more than the rom of the exercise you are doing. So just warm up with the exercise you doing, obviously start light and work up. If you can't do the full rom of the exercise, you need to work on this outside of the gym, as, like i said, you need time and it hurts.

I hear what you are saying rev. But I have 2 comps this year that I am doing. Bench has always been shit anyway.

Best of 110kg in a comp.

That was the reason I did a program where I benched 4 times a week. Max bench stayed the same and I picked up this condition.

After June I'll stop bench for a while.

Meantime I'm going with the physios word.

I'll look up what these Cuban presses are

Cubans and L-Laterals. Then shoulder press once you are strong. This will have your bench going through the roof in time.

Start out with just very light weights and see what you are like on them.

Edited by rev210

He is talking about static stretching right before you are training. When you static stretch, you reduce the blood flow to that area. This is obviously not a good thing right before you are going to load the muscle.

I do lots of static and pnf stretching, but at home, when i have an hour to do it properly. Cause you will be bloody sore if you stretch properly, and you need time to do it.

You don't need your muscle to stretch any more than the rom of the exercise you are doing. So just warm up with the exercise you doing, obviously start light and work up. If you can't do the full rom of the exercise, you need to work on this outside of the gym, as, like i said, you need time and it hurts.

Thanks for clarifying what I meant, i probably should have been a little more specific.

Cubans and L-Laterals. Then shoulder press once you are strong. This will have your bench going through the roof in time.

Start out with just very light weights and see what you are like on them.

ok so the cuban rotation is essentially what I do with one arm and a band so I'll give it a go with a broom stick handle to get it right and see how I go from there.

the L-Laterals I'll try with light light shit first.

He is talking about static stretching right before you are training. When you static stretch, you reduce the blood flow to that area. This is obviously not a good thing right before you are going to load the muscle.

I do lots of static and pnf stretching, but at home, when i have an hour to do it properly. Cause you will be bloody sore if you stretch properly, and you need time to do it.

You don't need your muscle to stretch any more than the rom of the exercise you are doing. So just warm up with the exercise you doing, obviously start light and work up. If you can't do the full rom of the exercise, you need to work on this outside of the gym, as, like i said, you need time and it hurts.

Ah well thats a better explanation and I agree. However, I still static stretch before the lifts. To check ROM mostly ,so not as involved as post workout static stretching. The blood flow ,assuming warm up is a non issue. I still have my doubts about information (statistics) that indicate a decline in strength as a result just prior to lifts. There appear to be just as many recent studies debunking this idea.

Farrrrk Kai Greene has some size, I think he's got

It In him to take Phil this year (I thought he did last year though)

In other news, did another 5x5 session today .

Got my bench up to 91kg, power cleans to 82.5, chins to 25kg and deads to 127.5kgs. Small improvements, but still improvement I guess!

Edited by Mitcho_7

Locked out 170kg deadlift this evening, actually much easier than my last failed attempt. f**king stoked!

Nice work! Now I have to pull 175 to stay ahead of you...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • Something coarse-ish. 180 is good.
×
×
  • Create New...