Jump to content
SAU Community

Recommended Posts

Foam roller might help a bit if the problem is muscular. I use it a lot on my legs / hip flexors, t-spine stretch etc and find it helps a lot.

Before you even mentioned shoes I was going to suggest you consider what you're using when doing squats or deads. Changing from regular cross trainers to hard, flat soled shoes made an immediate difference to my squatting. Felt so much more secure. I used to get bad hip flexor / TFL pain when doing squats and much of that was because my legs were so tense trying to stabilise the weight. It's not completely gone but it's better. Pendlay Do-wins or similar would be better still but with the amoutn of Oly lifting I do I can't justify the cost for shoes I wouldn't wear anywhere else. I am sure I lean forward a bit too at the lowest part of my squat, it's probably that it feels like the weight is going to fall off backwards (even though that is unlikely) and you instinctively try and move it forward. Maintaining tension in the abdominals and core is also so important in squatting and DLing, so I am learning.

Physio visit today, she has strapped both feet heavily to see if raising my arches helps.

She also wants me to focus on core/lateral oblique movements an come back in 2 weeks.

Podiatrist friend said leg length and arch response (as in when u are flat footed and pull the big toe up the arch should respond.) she suggested orthotics. Physio said strapping will prove if that's right.

Myo, the only one I actually pay for also gave me oblique targeting stretches (also good massage) and after my last visit (4th I think) said it was the first time my leg lengths and pelvis tilt had been even.

All see to think that if squat/sldl etc was the cause there'd be an acute pain during those motions which there isn't.

I did specify which spot on my back a few posts back with a diagram -basically lower left side.

I don't think a few on and off hours of awkward snoozing in hospital chairs has helped either.

Edited by ActionDan

Physio visit today, she has strapped both feet heavily to see if raising my arches helps.

She also wants me to focus on core/lateral oblique movements an come back in 2 weeks.

Podiatrist friend said leg length and arch response (as in when u are flat footed and pull the big toe up the arch should respond.) she suggested orthotics. Physio said strapping will prove if that's right.

Myo, the only one I actually pay for also gave me oblique targeting stretches (also good massage) and after my last visit (4th I think) said it was the first time my leg lengths and pelvis tilt had been even.

All see to think that if squat/sldl etc was the cause there'd be an acute pain during those motions which there isn't.

I did specify which spot on my back a few posts back with a diagram -basically lower left side.

I don't think a few on and off hours of awkward snoozing in hospital chairs has helped either.

have you ever seen anyone that squats or deadlifts 2x + their body weight with a weak core?

Not doubting you need core, just putting it up for discussion.

If its purely a core issue then I'd be more

Inclined to think its less related to my foot/ankle and more so a strain from starting back work on a weak core. Which seems odd as it doesn't hurt during those motions.

Not hard to think that my core is weaker after working From a recliner for 8 weeks and generally staying off my feet, then only walking on one (so perhaps an imbalance).

I think it was TTT who pointed out I wasn't setting up well enough also so might have strained something also - I feel better about setup at the moment.

With the baby stuff happening I have had to skip gym so we'll see if that plus foot strapping helps.

OK so apparently that video I put up of my +26kg x11 reps weighted dips was a piss poor effort on my part, lol. Last night smashed out +32kg x12,12; then +36kg x10; then +40kg x8. Totally stoked with this effort!!

Reckon I can get +50kg for at least 8 reps by the end of the month?

that's some mighty pec/tris you have there.

haha perhaps you're right :P although my bench press doesn't back this up, but I think that's due to poor delt strength....fking imbalances!! Partially why I'm focusing more on incline press rather than flat bench - just to activate front delts a little more. Incline dumbbell press is up to 34kg x9,7,6,6 reps now though :D

And yes I'm doing my best to balance out with pull/back exercises. Plenty of rows with various handles, face pulls with the rope handle, upright rows etc etc :)

lol

Trozzle: good work mate, yep 50kg x 8 not far off... my ability to do bodyweight stuff like dips/chins has gotten steadily worse as I've gotten heavier... and of course I'm not focusing on them anymore

cheers :) funnily I'm finding it to be the opposite myself lol - as I'm putting on weight, I'm getting much stronger. Just goes to show how restrictive my diet must have been before when it comes to energy and recovery I guess. Trade off is that I can no longer see my previously well-defined abs hahaha

yeah I've gotten a lot stronger as my weight has gone up too... but a lot of it has been to my legs, which doesn't translate well to dips/chins!

you have to work out what your goals are... if they are to put on size and strength then your going to have to eat for it... some guys can maintain abs while eating and lifting big, some need to let them go to make progress

put on the muscle now and your metabolism will be quicker when it comes time to restrict calories

everyone thinks they are big enough and have enough muscle etc... until they stand or lift next to a properly big guy... all of a sudden they don't even look like they work out lol

Edited by NickR33

If you spend a good night looking at bodybuilder photos or strongman competitions, then see yourself in the mirror later or even look down at your arms...things get a bit depressing lol

Goals are aesthetics...which at my previous state required me "bulking" to put on some more muscle mass (and alas, the unavoidable fat when trying to put on mass quickly). Figure we're rolling into winter so I don't really care about losing my abs and bloating out a little...I've cut back once with relative ease so I know it's easy once you commit to it, and as you said - more muscle mass will only make the cut faster due to BMR efficiency. Come beginning of September at the latest, I'll start summer conditioning...see how it goes.

We used to do a friendly comp on another BB site I was/am a member of.

A former member who passed away had started a thread many years ago called "Mild Summer Cut" and so every september we'd do a "mild summer cut" comp in memory of him etc.

Before and after pics and weights etc... and update the thread with what we were eating and so forth.

couple of members had supp stores and put up prizes for the winner etc.

but it was a 12 week effort where you try to come in to the first day of Summer in the best condition you could.

I recon get hayooooge from now and do a proper 12 week cut.

since it's your thing...

Edited by TTT

OK so apparently that video I put up of my +26kg x11 reps weighted dips was a piss poor effort on my part, lol. Last night smashed out +32kg x12,12; then +36kg x10; then +40kg x8. Totally stoked with this effort!!

Reckon I can get +50kg for at least 8 reps by the end of the month?

good effort. what sort of workout comes before you do your dips? or are they a primary?

Edited by jangles

We used to do a friendly comp on another BB site I was/am a member of.

A former member who passed away had started a thread many years ago called "Mild Summer Cut" and so every september we'd do a "mild summer cut" comp in memory of him etc.

Before and after pics and weights etc... and update the thread with what we were eating and so forth.

couple of members had supp stores and put up prizes for the winner etc.

but it was a 12 week effort where you try to come in to the first day of Summer in the best condition you could.

I recon get hayooooge from now and do a proper 12 week cut.

since it's your thing...

I always plan to do some variation of this... but it never happens!

good effort. what sort of workout comes before you do your dips? or are they a primary?

The last 2 sessions where I've pushed hard on weighted dips, they've been my second exercise for the session - preceded by incline dumbbell press on both occasions (also pushing out new PB for reps on this for both session).

We used to do a friendly comp on another BB site I was/am a member of.

A former member who passed away had started a thread many years ago called "Mild Summer Cut" and so every september we'd do a "mild summer cut" comp in memory of him etc.

Before and after pics and weights etc... and update the thread with what we were eating and so forth.

couple of members had supp stores and put up prizes for the winner etc.

but it was a 12 week effort where you try to come in to the first day of Summer in the best condition you could.

I recon get hayooooge from now and do a proper 12 week cut.

since it's your thing...

haha you always refer to the idea of training for aesthetics in a negative way with sarcasm etc :P but yes, that's about where I'm headed...continue steady gain until it's time to cut, then see where I am after 12 weeks of proper cutting.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
×
×
  • Create New...