Jump to content
SAU Community

Recommended Posts

Babe you've only just started deadlifting and squatting; these are major muscle building exercises. I gave you strength goals to work towards, because when you reach those (if you're still eating healthy), you will have a much lower body fat due to more muscle burning more calories with the same caloric intake.

There's a reason I still have ~10% bf, despite not having run for months and still eating large quanties of food all day. The muscle keeps the fat at bay, and I don't even have that much muscle.

I agree with everything Markos has said here and it's what I've been trying to instill in you, because you can't alter a training and diet regiment and expect it to work for you in the same way. You want to throw in cardio with it or leave out some exercises and you are going to be waiting a lot longer for your results.

As to what she looks like, Leesh has made some good improvement in the upper body...lats and shoulders are doing great. But she has been doing bench and lat pulldowns / rows a lot longer than she has squats and deads, so that's to be expected and there's still plenty of work to be done for the latter two.

I've been squatting and dead lifting for 3 months now and you know the only reason I wasn't doing them earlier is because I didn't feel my technique was correct; I wanted to wait to be shown correctly by you rather than get into bad habits with incorrect form or cause injuries. It wasn't a case of leaving them out because I felt like it. I did substitute exercises until how I learnt how to squat and deadlift properly in April. The rest of the program I've been doing for 8 months and I just expected more definition than what I have at the moment because of what you said to me.

And why wouldn't I still be eating healthy? You know I eat healthy and I' ve changed my diet and increased my calories because you want me to eat more protein and carbs.

Markos how am I not listening to Birds? I do his program, I eat how he wants me to eat, I use the protein powder he wants me to use, and if I'm not sure of anything I ask him and listen to his advice. The only thing he is not happy with me doing is my aerobics and boxing classes once a week. I've explained to him why I can't give them up and I thought he was supportive of my decision because there is a valid reason why I want to continue them.

I am supportive of you doing whatever makes you happy, Leesh; all I said was that cardio would hinder your goals and make things take longer. The training program I initially wrote for you contained squats and deadlifts, so because you've been unable to do these until recently, you need to be a bit more patient and give them time to pay off. A visit to PTC Perth will hopefully aid your confidence in the movements. Keep in mind the big three:

1. Regularly try to increase weights on major compounds and assistance exercises. This is the only form of exercise you need to do. Don't do cardio.

2. Eat LOTS of good, protein rich food to push through strength plateaus and support muscle growth. Focus on messing with calorie deficits AFTER you've reached your strength goals and built a decent amount of muscle.

3. Get plenty of sleep and rest - rest days are for resting and stuffing your face.

There are obviously more specifics to these three commandments, that I will continue to help you with in private...but do realise that any deviation from the big three is not doing exactly what I asked of you! No buts!

:)

<3

Leesh 3mths in the grand scheme of things is SFA.

I've been having a go at Squats and DLS since about Feb, and then finally went and saw someone to get a bit of guidance on the moves, it's only been I dunno a months or so tops since I saw Matt.

So after all that time fluffing about, I'm "just" getting to get to the point where most guys at Markos gym START OUT (or manage in the first few sessions).

My point is, this stuff takes time. My Bench was semi OK but I had literally had a couple of years former experience with it so that came back easier.

When I decided after school that I wasn't going to be Stick Man anymore, it took a bit over 12mths of absolute slogging dedication to the cause to pack on some beef EVERYTHING I did or ate was about that goal. Not 3mths of decent commitment, but 110% balls (ovaries?) to the wall dedication.

I'll clarify that a little though, I'm not saying you're not putting in, not at all, I dunno what you look like, what you started out at etc etc, all I'm saying is that it's very likely you've made some really good gains in the time you've been at it, but that it takes either a massive level of commitment (to get results fast) or a solid level of patience (to get results in a reasonable time frame).

I also think that Markos one of the "mores" each session is a big kicker in why his guys advance so quickly, more weight/reps/sets EVERY time you make the rep/set/weight goal in any movement. That's constant overload which will mean constant progress. Progress means more strength and likely bigger muscles, more muscle = more fat burned.

I personally do not do this as I'm scared of injuries and like to consolidate at a given weight for a few sessions (I like to make sure I can do the weight even on my worst days before going up again) but that's because I've had a bad history with secondary muscle/tendon type issues from over doing it thinking I was He-Man so that's how I manage it.

If you are not doing some kind of "mores" then progress will also be slower - which is fine so long as you have patience :)

Keep on trucking slugger !

Back on the gain train, and already in only a couple of days just about all definition I had has vanished LOL. f**king carbs and causing decent water retention for me. Meh, the 120kg bench is only 5kg away - which is next session considering I'll actually have energy again :D

Birds will be happy to hear how much of my proclaimed "evil carbs" I'm slamming down lol....last night almost half a kilo of wedges and fried into the oven, just over a whole chicken breast pounded flat and panfried with somewhere around 100g of short cut bacon, all topped with cottage cheese and some tomato sauce. No I'm not suggesting this was particularly healthy, lol. This was only round one, which was followed by multiple skirmishes involving another half a loaf of bread and condiments.

ZE GUTS, ZEY ARE CHURNING.

I am supportive of you doing whatever makes you happy, Leesh; all I said was that cardio would hinder your goals and make things take longer. The training program I initially wrote for you contained squats and deadlifts, so because you've been unable to do these until recently, you need to be a bit more patient and give them time to pay off. A visit to PTC Perth will hopefully aid your confidence in the movements. Keep in mind the big three:

1. Regularly try to increase weights on major compounds and assistance exercises. This is the only form of exercise you need to do. Don't do cardio.

2. Eat LOTS of good, protein rich food to push through strength plateaus and support muscle growth. Focus on messing with calorie deficits AFTER you've reached your strength goals and built a decent amount of muscle.

3. Get plenty of sleep and rest - rest days are for resting and stuffing your face.

There are obviously more specifics to these three commandments, that I will continue to help you with in private...but do realise that any deviation from the big three is not doing exactly what I asked of you! No buts!

:)

<3

Okay.

<3

Leesh, PTC Perth in Malaga is an incredible gym. Paul and Dan are 2 of the nicest guys you could meet in this game. They are only a year old so most of their lifters are novices, but they do have a handful of strongish guys and girls.

It is not expensive to get a little coaching there, its not like a commercial gym, I cant recommend you go see them enough, even if its just once a blue moon for a check up on technique and to get some reassurance

I think they only have around 10 competing powerlifters there, 2-3 are girls, the rest are just like you, working hard to improve

That's what I'll be doing Markos, I'll be dropping by to see Matt from time to time. $40 for an hour is well worth it every once in a while to make sure I'm on the right track.

I'm very glad I followed your advice in seeing him the first time.

Edited by ActionDan

interesting re: cardio - this is one of the things where the advice is literally so opposite and confusing that I can understand why Leesh feels frustrated.

Do cardio, don't do cardio, do HIIT, do steady state, do it before training, do it after etc etc.

FWIW I do 20 minutes of intervals after training at the moment simply for cardiovascular health. I thought the whole cardio kills gains thing was disproven :S

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Sounds like the rack seals blew.
    • ^ This is all good advice. I can imagine that there's some passive components in the HVAC controller that run that PWM output that could die, or suffer bad solder joints. It can be worth opening it up, taking a schmooze around looking for swollen electro caps, evidence of liquid escape anywhere, tracks that have been hot, lifted, cracked, etc. A DMM might not be suitable for seeing if the PWM output is pulsing. Might be too fast and too low voltage for a DMM to keep up. An analogue voltmeter might give a better hope. I use a handheld oscilloscope (<$100 from Aliexpress if you want something cheap). A DMM might see the voltage across the motor flicker. Otherwise, as above. If you can successfully see PWM action, then the control side should be good. If you can't see it with what you have, you might need to step up the instrumentation used, as above. Beyond that, and dbm7's advice on testing the motor directly, you're down to looking for broken wires, corroded connector pins, etc.
    • So Thanks for the comments etc. To follow up on this, we went down the path of fitting a divider down the middle of the external pipe that was added to the exhaust manifold and the divider went from very close to the external wastegate all the way up to the "V" part where the pipes from each side of the manifold joined. After this modification it was finally in a position to do the dyno-tune with some degree of success. Top end power was down about 10kw (250rwkw down to 240rwkw) I believe from previous but it seems to be more responsive lower down and at least it is now driveable and fun and back on the road to be enjoyed. Apparently the timing couldn't be run the same as it was running into knock and boost was down about 1psi. For all we know this could have been from the fuel being a bit older, or perhaps some slight complication from the new head gasket as we didn't have compression figures from before that mod to compare. I'm no mechanic and this is second hand info but I just wanted to follow-up to those that commented or read the original post with interest. After so many months of stuffing around this is a big win. The interesting part was most of the info around this was gained from information around Barra motors and not GTR as the manifold setup on the Barra with single turbo was more similar.  Thanks for those that helped with info. Regards Rob 
    • G'day ... first up, I very much doubt that's a resistor network (as used also for this job), but the part# looks right. The description of 'power module assembly' looks to be nissanese for 'PWM driven, ground switched, DC motor speed controller'.... the circuit in the schematic kinda infers that's the case... ...with the transistor symbol appearing in the unit described here as 'Fan Control Amp(lifier)'....being driven by pin20 on the HVAC unit,  and a feedback signal on pin19 from the motor negative terminal for some reason (might be motor fault detection, maybe they detect commutator switching to determine motor revs as well, I dunno)... but if they are  counting commutator spikes, a bad segment (or really worn brushes) will throw a spanner in the works... The motor itself will as said be brushed DC with segmented commutator, rated at 12VDC nominally ~ now-a-days I just unplug them, determine the positive wire, and hook them up to a variable power supply and find out how much current they draw, if they work etc etc ...you can also check for bad segments...ie; set the power supply up to feed 1volt @ 2amp max, then watch the wattage count as you slowly rotate the fan blower motor through a complete revolution ; any bad/dead segments will be clearly evident...some folks would just say determine the positive wire, and feed it battery voltage, and if fan spin, you've got a win...<grin>... well, at least that infers it should do something when plugged back in, and the HVAC unit commands it to run... and if it doesn't, you suspect the module, but you should check the PWM signal on pin20 is actually present, and if it is, blame the module ...  
    • Ah. OK. I take it back. I hadn't looked closely at the R33/4 arms and presumed that GKTech did as GKTech do everywhere else, which is to use sphericals there. The poly bushings are made to be 100% interchangeable, should use the standard bolt just fine. Every other bush in every other place in pretty much every other car, does.
×
×
  • Create New...