Jump to content
SAU Community

Recommended Posts

Nice set up, can you flip the section with the heave beam around, I would be putting my head through the roof.

Unfortunately not, though unless you're doing pullups high enough to have the handles in line with your collar bone there isn't an issue with the ceiling :) I made sure to try that part out as soon as it was in place lol

Padded flooring goes on the outside chief.

You don't want to be standing on squishy floor when squatting or deadlifting.

Or the bench to be wobbling around.

Take the 2 that you have under the bench and put one where your plates are and the other on the other side.

And we're set :)

kEdW9sH.jpg

Yeah was thinking that hahahaha

It's not as squishy as you'd think, but yeah definitely don't wanna be standing on it for squats. The mats are primarily for deadlifting, so I'll just rearrange to suit :)

I have found a gym partner, the ( little ) apprentice at work. His starting bench is 120 kilos 8 reps 3 sets than heavier after that. I have never been sorer since starting and it allows me to try things I wouldn't normally do. Def helps

Just did squats heavy (for me) for the first time in around a year. Next day I have a twinging pain above my left shoulder blade (feels like someone poking a needle to the skin). Have had the pain before but not for a long time.. Any ideas?

Just did squats heavy (for me) for the first time in around a year. Next day I have a twinging pain above my left shoulder blade (feels like someone poking a needle to the skin). Have had the pain before but not for a long time.. Any ideas?

Massage it

Just did squats heavy (for me) for the first time in around a year. Next day I have a twinging pain above my left shoulder blade (feels like someone poking a needle to the skin). Have had the pain before but not for a long time.. Any ideas?[/size]

Maybe work on your flexibility, my shoulders were tight as but now I do shoulder rotations with a broom stick, helps heaps for snatch and getting your head out the window on presses.

This is not me!!!!!! >>>>>

I'm much prettier, LOL.

Whilst I'm posting I got some new heavy wrist wraps of Fleabay, they are officially the best ones I have ever owned.

I initially got some but they sent 2 right hand wraps, I messaged the guy and told him about it so he could fix the packaging for others but not to worry about mine as I got the missus to fix them, he still sent out some new heavy duty ones.

I need to use wraps on cleans, bench and presses as my wrists joints are rubbish from old age and damage.

The elastic wrap is twice as firm as anything else I have owned, and now I have 2 sets (1 x awesome and 1 x OK) for the happy price of $16.

I had forgot about good customer service till then, there is hope for the world.

I can do that easy... its weird though.
If I do a movement it twinges, repeat doesn't twinge.. However do some other movement and it twinges and the original moment will twinge again too...

Looks like I'm out of action for a while... ffs

I can do that easy... its weird though.

If I do a movement it twinges, repeat doesn't twinge.. However do some other movement and it twinges and the original moment will twinge again too...

Looks like I'm out of action for a while... ffs

Why do you come to that conclusion?

get a massage or see a professional about it if it's so bad you can't do something. The issue won't go away without anything changing.

Just spoke to my friend (physio) about what you said.
She reckons its highly likely... = Massage, heat and rest.

I also don't use the padded roll when squatting.. Maybe need to use that.

Did arms tonight, some exercises were a big no go, others ok.

Just spoke to my friend (physio) about what you said.

She reckons its highly likely... = Massage, heat and rest.

I also don't use the padded roll when squatting.. Maybe need to use that.

Did arms tonight, some exercises were a big no go, others ok.

Don't do it man, lol

Just spoke to my friend (physio) about what you said.

She reckons its highly likely... = Massage, heat and rest.

I also don't use the padded roll when squatting.. Maybe need to use that.

Did arms tonight, some exercises were a big no go, others ok.

use a towel at most or just put the bar in the right spot along ur back or arms depending on positioning

Just spoke to my friend (physio) about what you said.

She reckons its highly likely... = Massage, heat and rest.

I also don't use the padded roll when squatting.. Maybe need to use that.

Did arms tonight, some exercises were a big no go, others ok.

The rotator would have been buggered up from pressing of some kind (external rotation), the Squat has just made the bar press on the inflamation you had.

I would still look at the flexibility of the shoulder girdle, the position of the bar on your back and grip width.

I have had surgery on both rotator cuffs, if I don't maintain a strict shoulder flexibility regime and some specific rotator cuff exercises mine play up no end.

When I press on the squat I have the bar fairly low on my traps, a fairly close grip, shoulders back, chest up and press on the bars like doing a behind the neck press which helps for me.

Hope it goes well, shoulder injuries are arse.

OK I need some clarification here on some lifts and what their goddamn f**king correct names are lol...I'll detail what I believe some they are, so just correct me if I'm wrong.

Clean

Loaded bar on ground > explosively lift bar to front squat position

Power clean

Same as clean, but starting from knee height

Clean and jerk

Loaded bar resting on floor > explosively lift bar to front squat position > drop to a lunge stance of sorts, while keeping the bar where it to finish with it above your head and arms locked > move back to standing position

Clean and press

Same as clean and jerk, but final stage is a strict military/front overhead press from shoulder height rather than dropping your body under the bar

Am I right?

OK I need some clarification here on some lifts and what their goddamn f**king correct names are lol...I'll detail what I believe some they are, so just correct me if I'm wrong.

Clean

Loaded bar on ground > explosively lift bar to front squat position

Power clean

Same as clean, but starting from knee height

Clean and jerk

Loaded bar resting on floor > explosively lift bar to front squat position > drop to a lunge stance of sorts, while keeping the bar where it to finish with it above your head and arms locked > move back to standing position

Clean and press

Same as clean and jerk, but final stage is a strict military/front overhead press from shoulder height rather than dropping your body under the bar

Am I right?

Sounds about right to me, but out of the mentioned movements all I really focus on is the clean and press, I am trying to learn to snatch but I am finding it a very hard movement to pull off.

Hence the only real clarification from me would be in the clean and press, well the press part any way, with a mil press the bar is pressed up but slightly forward, with the clean and press the press ends with the bar straight up and the head pushed forward with the shoulders pushed back (head through the window)like a clean and jerk.

Well at least this is how I was taught to do it, I firmly believe this is the best full body movement there is, others may differ but it is my fav, it smashes me and makes me puff.

Yes I'm a fan boy, plus it scares most of the gym plebs away from the rack area where they do their concentration curls for the girls,LOL.

Just spoke to my friend (physio) about what you said.

She reckons its highly likely... = Massage, heat and rest.

I also don't use the padded roll when squatting.. Maybe need to use that.

Did arms tonight, some exercises were a big no go, others ok.

Yeah it's a pretty common injury related to pressing.

I got a massage from the Physio.

Massage from a sports masseuse

Rested it for about a week.

100% recovery,

And rolled the surrounding area with a tennis ball when I could handle it.

Edited by Nee-san

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • They're supposed to not be compatible.
    • Evening fam, Pretty much what the title asks, I have looked all over and can’t find a proper answer expect one post from almost a decade ago which is vague. ive seen photos and they look pretty much identical, would an r33 GTR N1 reo work on an r32? reason I ask is they are cheaper to buy… $700 compared to 1k+ for an r32 n1 reo
    • Couldn't help myself, had to start putting it together.... It really is a solid bit of kit.  Probably stronger than i would have made it myself to be fair! 🤣🤣 Sweating like a pig after that.  Bloody hot and muggy day today, time for a swim now!
    • Yeah was thinking that. I've had the car go lower idle possibly around 650rpm every once in a long time after pouring fuel and would sound quite rough like a misfire, almost like it's shit fuel or something but who knows.
    • @Wazmond you are correct, my bad, was not my intent    https://www.facebook.com/share/15ZMn5oXtc/ Updated Event (so its not private and can be shared easier)  Attempting to coordinate a big push of Stagea's to this years GTR Festival. Great event last year and hoping for the same this year.    I've emailed them to ask to set a location aside for the Stageas for the show and shine - they are happy to do so if we can get them numbers, I'm happy to keep track of that. Entering as Nismo category.    I'll be road tripping up from Melbourne, would be cool to convey if people are interested, maybe there is SAU convoys from each capital? If you have ideas about that let me know.    https://gtrfestival.com.au
×
×
  • Create New...