Jump to content
SAU Community

Recommended Posts

  On 22/11/2013 at 3:22 AM, jangles said:

markos' email in below link

http://gpcaustralia.com/index.php/contact-us

It is a PDF file Markos emails to you.

His gym results speak for themselves, plus people on here have used it with good success.

It's not your normal bodybuilding.com 6 week transformation though.

However Markos would also be the first to tell you that the results obtained in his gym are not just from the right program and diet ;) Sounds like PPP is similar to 5/3/1

Can somebody recommend a good supplier of semi commercial equipment? In Brisbane would be great, but at the moment the place that I am leaning towards is from Gym Direct in Sydney so anywhere that does a decent price

Looking at getting a full set of dumbbells and a power rack

I was trying to source some stuff from China through www.chinakettlebell.com but am getting inconsistent and very slow responses, and this is before I have handed any money over, so don't want to transfer cash and then wait 6 months to receive goods of questionable/unproven quality.

Cheers, will have a look and get in contact with them

Just so people know specifically what I am after and what price I am looking to beat, these are the two items I am looking at ordering from Gym Direct:

http://www.gymdirect.com.au/item/8-Package-Deal_-Commercial-Power-Rack-+--Bench-+-Thrusting-Bearing-Olympic-Bar--+-150kg-colour-Bumper-Plates/618.htm

http://www.gymdirect.com.au/item/PRO-STYLE-RUBBER-FIXED-DUMBBELL,-2,5KG-to-50KG,-20-pairs/207.htm

  On 24/11/2013 at 8:09 AM, bozodos said:

However Markos would also be the first to tell you that the results obtained in his gym are not just from the right program and diet ;) Sounds like PPP is similar to 5/3/1

Effort is a big contributor to everything.

It's similar in that they are both a progressive training program, which imo, everyone should do.

  On 26/11/2013 at 9:16 AM, GHOSTrun said:

PWND - http://www.southsidefitness.com.au/ , local and cheap as FUUURRRRKKKK!! find a cheaper price, print it out, and they will beat/match it, it's all in the negotiation ;)

They look pretty good. Will pop in there in person tomorrow.

So i have had a bet with my mates in the last 4 months, who could get the best abs.

So joined a gym in the last 3 months, was pretty much a 2 month bulk to a 2 month cut

I started at about 73kg, went up to 77kg when bulking and now down to 71.5 kg on a cut

$400 pot with the deadline this Saturday

Progress so far: nohomo

Before:

1472760_760840300596998_1408812241_n.jpg

After:

1457757_760840303930331_169083069_n.jpg

decent progress mate.

need to tan up it will help your abbs shine

also look into getting rid of the water prior to Saturday so you can go in dry and looking even leaner.... just to try and win is all :P

  On 26/11/2013 at 9:55 PM, -FIGJAM- said:

decent progress mate.

need to tan up it will help your abbs shine

also look into getting rid of the water prior to Saturday so you can go in dry and looking even leaner.... just to try and win is all :P

Cheers mate

Think im a bit late for a tan lol unless its a fake one

I read alot about water loading and deloading, carbs loading and what not

Then I watched Layne Nortons video blog on it then decided not to do it :/

  On 26/11/2013 at 10:01 PM, blah_blah said:

Cheers mate

Think im a bit late for a tan lol unless its a fake one

I read alot about water loading and deloading, carbs loading and what not

Then I watched Layne Nortons video blog on it then decided not to do it :/

You can cut water because you aren't lean if it's just mucking around for a bet.

Layne's point is If you have to cut water for a comp, you just aren't lean enough.

  On 26/11/2013 at 10:14 PM, jangles said:

You can cut water because you aren't lean if it's just mucking around for a bet.

Layne's point is If you have to cut water for a comp, you just aren't lean enough.

So i just continue as I am and cut water say 4p.m Friday. The 'show' will be 9a.m Saturday

Should I load up on water today and Thurday then?

  On 26/11/2013 at 10:35 PM, blah_blah said:

So i just continue as I am and cut water say 4p.m Friday. The 'show' will be 9a.m Saturday

Should I load up on water today and Thurday then?

depends how serious you are about winning

I lost plenty of water weight prior to some mma bouts, but its not as simple as just not drinking - again depending on how serious you are and how much you want to loose.

start loading up on salt with your meals, then 24 hours prior to cut salt completely.

at a minimum id cut water 24 hours prior to the end of the comp and get nice and sweaty. If you can do some cardio which will help get more out. Its old school, it sucks balls, you will hate life, but will work

  On 26/11/2013 at 11:33 PM, L33SH said:

What do the abs look like front on? And how are your mates going, have you seen their progress?

I'd be drinking alot of water today and a bit tomorrow.

2 other mates are going ok

1 other mate has lost about 15% of his body weight, and he was already pretty lean to begin with :unsure: I haven't seen his abs yet though, but he is very competitive

Ill take a pic when I get home from work, don't think it will be as impressive lol

  On 26/11/2013 at 11:39 PM, -FIGJAM- said:

depends how serious you are about winning

I lost plenty of water weight prior to some mma bouts, but its not as simple as just not drinking - again depending on how serious you are and how much you want to loose.

start loading up on salt with your meals, then 24 hours prior to cut salt completely.

at a minimum id cut water 24 hours prior to the end of the comp and get nice and sweaty. If you can do some cardio which will help get more out. Its old school, it sucks balls, you will hate life, but will work

Cheers brah!

Ill give this a shot

I was going to do this. But after watching this video decided not to

But as Jangles said maybe I misinterpreted the video

  On 26/11/2013 at 11:40 PM, -FIGJAM- said:

and when you pose, lean back slightly, it will help bring the abbs out a little more

Will do!

Seriously though, pretty good effort there.

My advice: between now and your showing: eat only chicken breast and broccoli, three times a day. Continue your training, and train lots of volume (9-10 sets per exercise) with heavy weights. Literally bugger yourself so you're too tired to drive home. When you get home do some HIIT sprints.

I don't think it's worth stopping water for, and sometimes abs look fuller when you are hydrated IMO.

Oh and rememeber to stand under the light :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...