Jump to content
SAU Community

Recommended Posts

Thanks Joey,

re cardio I cannot run yet I am upto 4.3 kph, i have had a good surgeon and have ongoing physio every week. I'm slowly improving my diet which isn't perfect so I'm looking for some sort of protien shake to maximise my recovery from exercise and fill holes in my diet.

Ahh I'm assuming your back is really not in a good shape if your maximum walking speed is 4.3kph. Hopefully soon enough you can get it up to around the 7kmh. When I did my cutting last year I was doing 35-40min of walking at around 7kmh with an incline of a crew degrees.. I'm no expert but I think that would be a good goal.

Like you said if you clean your diet up you will see the results come alot faster. 4kg in 2 months is still a respectable effort for someone in your situation.

I reckon if your diet is decent you won't need the protein powder. But if you really want to take it obviously dont get anything with bulk calories.

  • Like 1

I'm not looking to start a debate on whether you can really train upper and lower chest, but what I can say is that I've recently noticed my lower chest is getting a bit big and round for my liking. This is despite having lost a bit of weight recently.

Time to incline the bench a bit or just lower weight and do more volume?

Edited by ActionDan

I'm not looking to start a debate on whether you can really train upper and lower chest, but what I can say is that I've recently noticed my lower chest is getting a bit big and round for my liking. This is despite having lost a bit of weight recently.

Time to incline the bench a bit or just lower weight and do more volume?

more volume is going to encourage muscle growth, i.e. size.

On a different note did anyone see that supps r us for burnt down? I saw it on the news the other day. Bloody shame ( I had just placed an order ) it was strange the owner made reference to the other supp stores suggesting they may of had some something to do with it.

Maybe that's why they've grown, as I switched back to sets of 8, but lighter.

I just thought maybe lighter again but more reps might tighten everything up.

I note that when tensed, my lower pec is very firm but my upper is quite soft by comparison.

Maybe that's why they've grown, as I switched back to sets of 8, but lighter.

I just thought maybe lighter again but more reps might tighten everything up.

I note that when tensed, my lower pec is very firm but my upper is quite soft by comparison.

Every time after I get a massage, my chest is always flatter/smaller in appearance because muscles are released. Maybe you can ball/roll them out a bit to get desired result?

Got an issue with my shoulder at the moment. Haven't lifted anything for a few weeks die to it. Hurts to lays on it and cant throw a tennis ball without mass pain. Not sure if I should see a physio about it

Dunno if ball rolling is the answer for me.

Ideally I just need the lower part of my pec to not be so full, could be fat too I guess?

And the upper to be a bit firmer.

For anyone doing incline, where are you feeling the burn?

I'd almost say I feel my flat bench more in the tri's than chest specifically. Though I've always got a pump in the tits afterwards. So was thinking incline to even it out if that actually works.

Should probably see a physio if its been a couple weeks haha where abouts is the pain?

<br /><br />Practically the entire shoulder.... When I throw a ball its like my entire shoulder is clicking through the action and then sharp pain.

Dunno if ball rolling is the answer for me.

Ideally I just need the lower part of my pec to not be so full, could be fat too I guess?

And the upper to be a bit firmer.

For anyone doing incline, where are you feeling the burn?

I'd almost say I feel my flat bench more in the tri's than chest specifically. Though I've always got a pump in the tits afterwards. So was thinking incline to even it out if that actually works.

Watch the first video I posted a page back, Dan. Bench is more tris and shoulders than chest. It will work the chest, obviously, and the different positions will activate the chest more or less...but if you want to target it in a more involved way, get onto an isolation movement like flies.

That being said, most of the chest muscle naturally sits where you refer to as the "lower part", so a lot of people have this issue at some stage and, it's only really an issue because we feel like we are developing "boobs" instead of muscle. It is less obvious on those who have lower body fat %, because, not only does the upper part of the pec insertion have more definition, but the abdomen is slightly sunken (as opposed to flat or a gut), helping the so called "upper chest" to stand out a bit more (more forward of the body) and the "lower chest" to recess a bit (instead of sitting on top of fat). That's my opinion, anyway.

It is also less obvious on heavily built chests, because the muscle is then big enough that you start to see the "upper part" as more developed, when really it's just that the whole pec insertion is bigger. But alas, I am one of those who subscribe to the theory that you can't change the shape of the pecs per say, only build it bigger to give the illusion of having done that.

There are all kinds of muscles in the upper body that can mess with the appearance of the pecs just by contrast, too: traps, lats, biceps, delts. Even your posture plays a huge part; try standing in front of a mirror, side on, moving your delts back and forth to see how they stretch the muscle in a static state.

I was just reading this: http://www.aworkoutroutine.com/how-to-build-a-big-upper-and-lower-chest/

And I'm inclined to think it's likely just excess fat in my case.

I don't want my chest to be any bigger at all so I wont be doing flies (can't at home anyway).

What I need is to get some cardio back in my routine. Especially as I get older I want to tone and tighten more.

Or Euro training...

Dips might be contributing as well.

Edited by ActionDan

Practically the entire shoulder.... When I throw a ball its like my entire shoulder is clicking through the action and then sharp pain.

I'm not an expert, but it sounds like an impingement of some sort, would definitely see a physio if it's been a few weeks of pain already.

Maybe someone (like rev) with more experience will chime in.

Ahh I'm assuming your back is really not in a good shape if your maximum walking speed is 4.3kph. Hopefully soon enough you can get it up to around the 7kmh. When I did my cutting last year I was doing 35-40min of walking at around 7kmh with an incline of a crew degrees.. I'm no expert but I think that would be a good goal.

Like you said if you clean your diet up you will see the results come alot faster. 4kg in 2 months is still a respectable effort for someone in your situation.

I reckon if your diet is decent you won't need the protein powder. But if you really want to take it obviously dont get anything with bulk calories.

Thanks for the help Joey, hopefully I can fit in my bride seat again and get the old dunga out to a track day this year when the back get up to it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Dort sounds above 3k rpm are dorty 🤣 I might krinkle black the alloy 🤔
    • It makes you wonder, all these people starting to make a billet replacement head, I wonder if any have thought about trying to adapt tech from newer engines into them. You're already at the full design stage to make a billet head... Why not really spice it up and had some more modern tech into the mix too...
    • Connect all the plumbing up properly. The actual worst part about having the turbo unable to actually build boost, is you can and likely would over soon the turbo if you drove the car (free rev while stationary isnt likely to manage it).   If you do have an air leak as Duncan suggested, you'll have a bad time as the AFM will be saying different to reality.   As you have had the engine out, I'd go over all electrical connections again. If you have a consult cable, plug it in, and see what the ECU thinks is going on. Did you touch the timing belt? If so, double check your timing on the gears is correct AND put a timing light on it while it's idling and see what ignition setting you have. Is the AFM you've installed the one that was in the car previously? You said you replaced seals, what seals exactly? What have you had apart?   From memory when I had my RB25DET with factory throttle, there was two plugs the TPS plug on the loom could go to. One would leave the car running like shit, the other made it work, I think one plug on the TPS area was for something else (an option). It's too many years since I saw that part of the loom to remember properly though.   Is the car idling smooth (as smooth as an RB can)? Does it smell fuelled up?   I have a feeling either timing in timing belt is off, or a sensor isn't right.
    • Theres still skid pan and motokhana days up in QLD at least that are $100 or less. The ones that are ran as "driver training" less so, they're expensive, but just normal skid pan days like SAU ran are still low cost. And thats one of the places I learned to be a lariken, purely by asking for passenger rides, and how people were doing crazy things. Reese gave me plenty of pointers back in the day for skid pan! And yes Duncan, I will never forget your pointers for track work. Especially after Neil got out saying "I am NEVER getting in the car with him again!" 😛
    • 49719 is the cooler loop. Right at the front, LHS of that diagram. Return line from rack (LP side) goes to cooler loop on RHS front of car, then back under engine and returns to bottom of tank. 49717M is feed from tank to pump. HP line out of pump is thick rubber, followed by the hard line that runs down to crossmember and runs in parallel (but opposite flow direction) to the LP return line. Nothing goes anywhere near the firewall or interior of car. The closest they get to that is the connections on the rack.
×
×
  • Create New...