Jump to content
SAU Community

Recommended Posts

Times change Simon, when you competed at my comps I didnt allow belts, knee wraps or wrist wraps, all squats walked out

Now at PTC we have a monolift, specialist DL bars, specialist squat bars, lots of my competing lifters wear belts, they all wear knee wraps and most wear wrist wraps when benching

Still proud to say my strongest, Jack, who squats 300kg, benches 185kg and deadlifts 300kg, has never worn a belt, but he is only 21

Drop in when youre in Vic next

I should also point out that back then, no one squatted 200kg, benched 150kg or deadlifted 250kg

We now have 13 that squat 200kg, 12 that bench 150kg and 13 that deadlift 250kg, including 6 lifters who can do all 3, with 3 of them aged 21, 20 and 19

Future looks bright

I should also point out that back then, no one squatted 200kg, benched 150kg or deadlifted 250kg

We now have 13 that squat 200kg, 12 that bench 150kg and 13 that deadlift 250kg, including 6 lifters who can do all 3, with 3 of them aged 21, 20 and 19

Future looks bright

What sort of weights are these lifters at? Or doesn't that matter?

Does height ever come into it? Always seems to be excluded from factoring...I'm curious as to why, as I would have thought tall guys had a bit of a disadvantage...given how much extra weight height can give you.

Does height ever come into it? Always seems to be excluded from factoring...I'm curious as to why, as I would have thought tall guys had a bit of a disadvantage...given how much extra weight height can give you.

The bigger the frame the more muscle can be put on it.

Look at the world's strongest man competition for example, only a couple of the guys are just under 6 foot. Most are well over 6 foot.

And i'm not sure now, but a couple years ago the world pl records were held by guys over 6 foot.

I think limb length is what can be a factor, not whether you are tall or short. A tall guy with short arms may bench better than a short guy with long arms.

sound like an excuse. :D

Of course it's an excuse, but it's nice to know who has natural advantages and disadvantages in this sort of thing; what creates them.

When it comes to competition where weight classes exist...the olympics, for example...I didn't see many 6'3 guys doing clean and jerks in London. In anything but the open / max weight classes, it seems height is a disadvantage.

The bigger the frame the more muscle can be put on it.

Look at the world's strongest man competition for example, only a couple of the guys are just under 6 foot. Most are well over 6 foot.

And i'm not sure now, but a couple years ago the world pl records were held by guys over 6 foot.

I think limb length is what can be a factor, not whether you are tall or short. A tall guy with short arms may bench better than a short guy with long arms.

Thanks for that info. When you say frame size, does this only refer to height or can body width (e.g. shoulder span, waist, bone structure etc.) be a factor in it?

More height = more muscle can be put on (overall bodyweight) and IMO bodyweight is proportional to the amount you lift. i.e. 100kg person lifts 160kg dl thats only 1.6xbw, 75kg person lifts 150kg dl thats 2xbw. So the 75kg person maybe lifting less but overall he is proportionally stronger than the heavier person, but of course the heavier person will have an ego and be like "bro I can lift more than you"

Edited by Dani Boi

height is obviously a factor in olympic weightlifting, the taller you are the higher you have to get the bar to get underneath it... shorter arms also help but there are exceptions to the rule

powerlifting I don't think height is as much of a factor... long arms help with deadlifting, short arms better for bench... squatting no idea? might be hard with a long torso to stop the weight folding you in half?

weight is a much bigger factor and the proportion of limb lengths in relation to optimal leverages... but at the end of the day strong is strong (that's my new favourite saying... along with 'strong people are harder to kill'... thanks markos)

hot down here today... summer is almost here... can't wait to be sweating my arse off in a gym with no air con... at least you need half the time to warm up lol

love working out in the sunshine... might have to get a shitty old rack for outside... wife should love that idea

Damn public gyms.

Lastnight there was a tiny brunette hussy wearing the shortest and tightest little shorts...perfect body shape and without a doubt the hottest thing I've seen at a gym...parading herself from room to room, "testing out" machines and giggling out loud to her grenade friend. I swear she signed up just for attention...and she was getting it; everyone looking.

And then she did stretches and splits on the exercise mats hnnnnnnnnnnnnng probably a gymnast. I can't work out with this shit.

Well there are weight classes

60kg, 67.5kg, 75kg, 82.5kg, 90kg, 100kg, 110kg, 125kg, 140kg, 140kg+. You must way UNDER the weight

Our best lifters

75kg class - Emad Nayef 220kg squat, 125 bench(injured, has done 150kg) and 260kg deadlift, in competition, best total 602.5kg (35yo)

82.5kg class - Martin Nguyen 227.5kg squat, 132.5kg bench press , deadlift 272.5kg, best total 632.5kg (teen, 19)

90kg class - Max Markopoulos 250kg squat, 155kg bench, 245kg deadlift, best total 650kg (20yo)

140kg+ - Jack Pollard 280kg squat, 185kg bench, 280kg deadlift, best total 745kg 21yo)

All 4 lifters have lifted more in the gym, but these are comp results only

Damn public gyms.

Lastnight there was a tiny brunette hussy wearing the shortest and tightest little shorts...perfect body shape and without a doubt the hottest thing I've seen at a gym...parading herself from room to room, "testing out" machines and giggling out loud to her grenade friend. I swear she signed up just for attention...and she was getting it; everyone looking.

And then she did stretches and splits on the exercise mats hnnnnnnnnnnnnng probably a gymnast. I can't work out with this shit.

And you didn't approach her to ask for "stretching advice"?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Got the motor out and torn down. I'll be dropping off the block Monday. Luckily the scoring on Cyl6 is much less pronounced then the pictures made it out to seem. It can barely be felt. If you pass your finger over it 10x you'll barely notice it. Hopefully by some chance it will only require a honing. I'm not in the mood to buy one size larger pistons or another block. Oddly enough my 6th cylinder with the scoring has extremely clean intake valves compared to my other 5 cylinders. I'm worried the scoring was caused by too much fuel or Water/Methanol washing the cylinder. I'll review some old logs to confirm.  This was also the first time I pull an engine with the transmission still attached. It went much better then expected. I was worried my CD009 wouldn't make it easy due to its sheer size but it was much easier this way. 
    • From the pictures I have when doing the job the flywheel is the same diameter, I don't think they're playing weird tricks like putting weights at the outer diameter to increase flywheel inertia or anything like that. The OEM flywheel is definitely heavier, but it's not a huge difference. Quoted weight savings of the clutch is 2 kg so I can't imagine the flywheel being lighter than ~7 kg. Kind of regret not weighing it before the clutch went into the car but as far as driveability goes I have no complaints.
    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
×
×
  • Create New...