Jump to content
SAU Community

Recommended Posts

Wondering if it has been done?

Looking at welding a GTR plenum to RB20 runners and welding a boss on the front for the throttle body.

Had a search, couldn't find anything, has it been done? any opinions? (I know I'll get a lot, opinions are like assholes afterall :blink: )

Lastly, any good/bad experiences with china throttle bodies?

Link to comment
https://www.sau.com.au/forums/topic/200787-modifying-gtr-plenum/
Share on other sites

i have seen adaptor plates, you are better off making some of them. you especially want to keep rb26 throttles, they are the only reason i would get a 26 plenum and go to all that effort.

you could also cut the flange off and put a rb20 one on. the inlet does not get as hot as the exhaust mani obviously but i would suggest you still need quiite a good welding hand

dont use a bigger throttle body on a forced induction car. Only thing you will get with a bigger throttle is the sensation of more power. Your standard rb20 throttle body is good enough to flow huge amounts of cfm on a turbo car. Your not sucking.. your focing so bigger wont do much at all. Id stick to standard cause of reliabilty

EDIT: I was speaking to plazmaman and they said they have seen drag cars with 1000kw+ with standard throttle bodys... the bloke talked to me out of buying one

Edited by choku_dori

I highly doubt you can make ~1300hp with the amount of airflow through a 63mm aperture.. someone do the maths and tell me it's true before I believe it.

rb26s13: what has been covered many times? there are two questions, a main and a secondary. Please be specific or piss off :thumbsup:

Lastly, I have an RB30DET in an R32 with a GT35R to go on (for those that don't know) so I don't care about response/power/etc, I need to do this as it is the only way the piping will work with my setup. I have seen the RIPS and plazmaman items, aswell as some custom jobs from people on the forums, but am reluctant to fork out for a new item at the prices they are.

Maybe I shouldn't have asked about the throttle body.. my mechanic said I can't use the RB26 throttlebodies (likely due to wiring etc) and TBH I really can't be assed trying to get them to work.

To cut it short, has anyone fitted an rb26 plenum to an rb20/25 (doesn't matter which as the required mods would be practically the same), with or without throttle bodies.

Is it safer than an ebay job from the states?

I have vaguely gathered that 26 plenums can run one cylinder slightly lean but as it's a widely known fact tuners compensate for it.. is this correct?

  • 1 year later...

wow.. forgot about this!

I'll get some photos next time I'm at the workshop. GTR plenum has been welded to RB20 runners, Q45 flange welded on but had to set it a fair bit further back than orginially imagined.. I'm running full GTR cooler setup so it's pretty damn tight for room. At the moment it looks like I'm going to have to weld a bend straight on to the throttlebody to get it tight enough.. maybe even lobster back it :action-smiley-069: heh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • it takes so long to get things done but ... they are nearly there and we hitting the track soon again  So - at Perth Festival of Speed the car unfortunately had a decent off, wasnt me driving, wasnt the person drivings fault. Long story short car got sent very fast towards the wall without the control on throttle from the driver input and a disaster was averted but there was damage that needed to be fixed - carbon busted and alot of bent bits The splitter got munched and had to go back to get fixed - took a bit to get it there, fixed and back but got a surprise package when a new double element higher DF splitter came back - nice surprise !  and first person to have one     At a car show I took the car too some punks stole one of my carbon indicator blanks and stomped on the other so had to get a new set of headlight / indicator combo from tops stage so got front fender vents as well to put in the order     While all this was happening the new MCA golds turned up and did some fiddling around with those   Put in the flappy paddle system and clutch lockout wiring/ system   We have also put shorter gearing in top top it out at 300 kmph in 6th gear  where previously I held 5th to 282 at SMP and 277 in Perth   Looking for better control and faster acceleration     I wasnt intending on doing pedal box I was managing with the brake master replacement system I had going on and adjusted std pedals but on applying the clutch switch to the old system we found the *insert technical word here * bar that goes from the pedal to the master was bent about 40 deg and about to snap = lucky find otherwise be a bad bad time - discussion was had about getting a custom bar built to withstand the load but in reality it was time      making any suspension, wheel or anything adjustments to date has been a nightmare - aero off, adjust, check and repeat - time consuming and hard - short of going full airjack system we fashioned some external manual car lifts this will make life a million times easier     All the bent framing, some intercooler pipes and other has been fixed and replaced and after 6 months I finally have the car back at home in my control so its get to work on it, set ride heights, wheel align and will start track testing again soon   So ultimately other than a few flashy bits nothing actually looks likes its been done but in reality alot has. Typical   We'll see how all this goes        
    • I'm far from an expert, but for sticking bits of metal together occasionally I got a MIG, the biggest one I could get with a 10a plug (because while I have some 15a GPOs around, they are not everywhere).  Also, because I get through SFA, I just buy the small disposable gas bottles at Bunnings, I'm not opening a BOC account to get through 1/10th of a full size bottle each year
    • FWD is different though.
    • Ignore the BOV / recirc valve question. You have an NA and shouldn't have one. If there magically is one though... It should be removed, though it shouldn't really effect it in the way one will for a turbo motor with it venting to atmosphere while running an afm.
×
×
  • Create New...