Jump to content
SAU Community

-=first R35 Gt-r In Oz=-

conman

By conman,
in R35 GTR

 Share

Recommended Posts

conman Newbie

conman

Posted
Posted

ORAN PARK RACEWAY, JANUARY 11: The first Aussie-delivered R35 Skyline GT-R has undergone private testing at Sydney's Oran Park Raceway today.

The white R35 has been purchased by Donut King Racing motor racer Tony Alford, CEO of Retail Food Group Limited, through importers www.justjap.com.

The car had a mere 28 kilometres on its odometer before Tony took the wheel for the first time. It's factory plastic protective wrapping can still be seen on seats and door trims. It will be sprayed in Donut King Racing pink before its racing debut at the 2008 Targa Tasmania over April 15-20.

"As long as we do better than the 32's 9th Outright at Targa then we'll be happy," Alford told an onsite representative of Express Publications' Express Media Group (EMG), Greg Conway, in relation to his existing R32 GT-R race car.

Conway, Editor of Zoom Magazine (www.zoommagazine.com.au), had reportedly been up in the Oran Park tower before the 35 had arrived onsite via tow truck. It was spotted while being driven slowly around the Oran Park complex.

With Alford at today's first-ever test drive was Just Jap's Darron Corrigan. Corrigan, Alford and fellow racer Peter Leemhuis are pictured trying to fathom all of the onboard electronics. Also there to test was former V8 Supercar privateer and Donut King Racing team member Mal Rose. Rose, Leemhuis and Alford were former Team Mirage Australia teammates, racing Mistubishi Mirages in events like the Bathurst 24Hour at Mt. Panorama.

"I'd rather be racing that than this," Rose quipped, pointing to his 08 season V8, also white in colour. "But gee he's adapted to it pretty quickly," he added of Alford's laps.

"It was a bit jumpy over the ripples so it'll need a bit of setting up in the front end," Alford told Corrigan. Corrigan's boss, justjap owner Steve Thatcher, is reportedly the man who "made it all happen".

"My R32 Skyline is prepared by justjap," Alford confirmed. "This one was brought in a week before Christmas. Straight away I can say it is less laggy than the 32."

Corrigan told EMG that it will be "a couple of months" before the car is all sorted for Targa. Possible suspension and exhaust mods will precede its tarmac rally debut.

post-24153-1200028231_thumb.jpg

post-24153-1200028322_thumb.jpg

post-24153-1200028357_thumb.jpg

post-24153-1200028380_thumb.jpg

post-24153-1200028427_thumb.jpg

post-24153-1200028451_thumb.jpg

post-24153-1200028464_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/201113-first-r35-gt-r-in-oz/
Share on other sites
Blitz Grand Master

Blitz

Posted
Posted
Geese....it doesn't take long....ones been crashed in Hong Kong, ones been resprayed Lambo orange with aftermarket bits and now theres one in Australia....people don't muck around do they :D

Thats awesome already having one in Aus for racing :(

Cheers!

Gagz

There was also one crashed in Tokyo.

sewid Grand Master

sewid

Posted
Posted
what were its timings on that track??? :D

car looks huge tho

No point. As Nick already said it has the speed limiter in place and is hitting it before half way down the main straight. Obviously times will be less than the car will achieve once it has the speed cut defeated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • hardsteppa
      R-chassis INNER tie rod torque spec?

      By hardsteppa · Posted

      Don't be ridiculous. "2-3 ugga duggas or one Oof. You have to use Oof on tie rods because you can't get an ugga dugga on there." Is not helping the guy at all.
    • JC71
      gauge needle removal

      By JC71 · Posted

      I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Roy
      A Boy's Love For His Rb20

      By Roy · Posted

      Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • GTSBoy
      gauge needle removal

      By GTSBoy · Posted

      Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • GTSBoy
      Wheel refurb?

      By GTSBoy · Posted

      Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
×
×
  • Create New...