Jump to content
SAU Community

Recommended Posts

You posted this on the 10th of jan

hey everyone i have a couple of questions i have a r33 gtst which i will be puting a to4z onto very soon i already have internals etc etc... im just unsure of wat sorta fuel system i need to install.... i wish to make 500-550. suggestions on size of surge tank size of fuel lines wat lift pump from tank wat pump afta surge wat fuel rail to suite greddy plenum.... wat injectors.... ne help is much appreciated thnx for ur time

Had you not already decided on the T04z??

Its probably the best turbo for your goal if you are still considering a big single.

This was posted yesterday

r33 gtst. in process of building motor have got three options.... rb25 block gtr crank h beam eagle rods je pistons fully built head...

rb26 transplant same as listed for rb25 but with the flow characteristics of a 26 head with cams and so forth.

or a 26/30 built bottom head with cams blah blah you catch my drift i just cant make up my mind and i cant find ne decent machinist that dont want my left nut for making the 26/30 combo or doing machine work i was for both rb25 /26 engines

This was the 11th of jan

im putting a gtr crank into my gtst block but im unsure if the twin plate from my gtst will bolt upto the back of the gtr crank does neone know if the holes line up from gtst to gtr

Hang up a second. You didnt wanna pay a machinist to do you a 26/30 but you bought a tomei stroker today when yesterday you had 3 engine options about what you were thinking about building???

Says in that first post you have built internals etc etc??

I dunno bout anyone else but im sure as shit confused about pretty much everything you've said???

Care to clarify exactly what you do and dont have, im not being derogative towards you but mate tell us what you do actually have truthfully and we can give you honest and experianced advise

Edited by Risking

I have the tomei stroker hidden in a GT block.

Turbo's are HKS GT RS's with Tomei Procams 270 @ 10.25mm with a ported head.

Fullboost (1.65 bar) @ 4800 RPM in 4th (give or take 100 RPM)

Wouldnt change a thing. At times i wish i had maybe 2530's but it really isnt that bad.

lol now its a 2.8 HKS kit.

Now, the most important question... skylinekid... are you 15?

And before you bag someone maybe you should read who you are replying to. Skylinekid didn't say he had a HKS. :P

im still wondering who in aus had a tomei 2.8 in stock and was open on a sunday for him to go buy it.

Yesterday he was tossing up a 26, 25 or a 30/26 now his sporting a new tomei engine!

+1

yes i am also very confused as to what exactly he wants advice on.. which one of his 3 motors lol.

sometimes u just cant help retards :P

hey shane i know a good friend of urs so if i was u id watch ur mouth buddy....

im 20 i have a r33 gtst i was goin to go with th 25 head and block but wen i pulled it out and comtemplated everything i wanted big power with decent reliability the 25 block just wouldnt provide the right comfort factor that a 26 block would.... plus the reason i changed my mind about using the 25 i figure y waste money on an inferior head package.... dont get me wrong there still a good head but the 26 head is just far superior in flow characteristics.... do u undastand now ive just had a fair few mind changes lately as to where i wanna waste my hard earned money is that orite with u...

is it wrong for me to ask questions then realise that im doin the wrong thing huh enlighten me plz...

neways yes i figured i was gonna dump gtr shit into a 25 so i thought f**k it just get a gtr motor... makes sence to me

and yes to4z was my likely option i was just seen wat anyone else was gonna say

Edited by skylinekid
im still wondering who in aus had a tomei 2.8 in stock and was open on a sunday for him to go buy it.

Yesterday he was tossing up a 26, 25 or a 30/26 now his sporting a new tomei engine!

ebay top bloke

even got the ones to run bigger lift

Edited by skylinekid
can you provide the ebay link for your purchase?

http://cgi.ebay.com.au/Tomei-Stroker-Kit-N...1QQcmdZViewItem

i havent fully ordered it yet ive email'd him to make sure its the right kit but yeh i just wanna make sure

im pretty sure its the non cooling channel kit tho

hey shane i know a good friend of urs so if i was u id watch ur mouth buddy....

im 20 i have a r33 gtst i was goin to go with th 25 head and block but wen i pulled it out and comtemplated everything i wanted big power with decent reliability the 25 block just wouldnt provide the right comfort factor that a 26 block would.... plus the reason i changed my mind about using the 25 i figure y waste money on an inferior head package.... dont get me wrong there still a good head but the 26 head is just far superior in flow characteristics.... do u undastand now ive just had a fair few mind changes lately as to where i wanna waste my hard earned money is that orite with u...

is it wrong for me to ask questions then realise that im doin the wrong thing huh enlighten me plz...

neways yes i figured i was gonna dump gtr shit into a 25 so i thought f**k it just get a gtr motor... makes sence to me

and yes to4z was my likely option i was just seen wat anyone else was gonna say

shit eh, i know a good friend of mine too! :)

what makes the 26 block better than a 25 block? theres HEAPS of 25's making "400hp" and higher

also any form of stroker is massive overkill for "400hp", fark even i wouldnt do that! and im into overkill ;)

seriously, if u want to be taken with any form of seriousness, think before you post mkay

shit eh, i know a good friend of mine too! :)

what makes the 26 block better than a 25 block? theres HEAPS of 25's making "400hp" and higher

also any form of stroker is massive overkill for "400hp", fark even i wouldnt do that! and im into overkill ;)

seriously, if u want to be taken with any form of seriousness, think before you post mkay

well for one read b4 u post.... i want 550 to 600 rwhp

is it still overkill

What size cams and what headwork are you 'planning'?

That Tomei stroker kit is only the 8 counter kit and the 'cooling channel kit' is actually only an extra option regarding pistons. Everthing else is the same.

Do you actully need a stroker? Plenty of guys are running rb26's with TO4Z's and are making the required power.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys, has anyone either purchased or built themselves a rotisserie for their car before? I can only just justify the need for one hence why I should just make one but at the same time, if I make one I can kiss another 4 weeks of potentially productive car working time goodbye because I'm building a bloody rotisserie....  I mainly want it for the application of the body deadener.  Cleaning the old stuff off, priming and then colour over the deadener doesn't worry me, it's just the application using the Schutz Gun that I feel would achieve a significantly better finish painting it side on and keeping the Schutz Gun upright.  I don't think they would work well on the side let alone almost upside down for some areas.  If the product I use (Terosun, etc) could work through a HVLP ok then it might be ok to apply without the rotisserie.   I can get one of these style ones for about $1200 which is pretty good value-     I reckon if I made one it would cost around $500 but it's more the time that it would take is more of a killer than the cost.  They look to hold their value pretty well second hand so I could always sell it after using it and realistically only lose $200-$300 at worst.  Or keep it and buy another project when this one finally sees the light of day... Anyone selling one...? Cheers!  
    • While it is a very nice idea to put card style AFMs into the charge pipe (post intercooler, obviously), the position of the AFM and the recirc valve relative to each other starts to become something that you really have to consider. The situation: The stock AFM is located upstream the turbo, and the recirc valve return is located between the AFM and the turbo inlet, aimed at the turbo inlet, so that it flows away from and not through the AFM. Thus, once metered air is not metered again, neither flowing forwards, or backwards, when vented out of the charge pipe. When you put the AFM between the turbo outlet and the TB, there is a volume of pressurised charge pipe upstream of the AFM and there is a volume of pressurised pipe downstream of the AFM. When the recirc valve opens and vents the charge pipe, air is going to flow from both ends of the charge pipe towards the recirc valve. If the recirc valve is in the stock location, then the section between it and the TB doesn't really matter here - you're not going to try to put the AFM in that piece of pipe. But the AFM will likely be somewhere between the intercooler and the recirc valve, So the entire charge pipe volume from that position (upstream of the AFM, back through the intercooler, to the turbo outlet) is going to flow through the AFM, get registered as combustion air, cause the ECU to fuel for it, but get dumped out of the recirc valve and you will end up with a typical BOV related rich spike. So ideally you want to put the AFM as close to the TB as possible (so, just upstream of the crossover pipe, assuming that the stock crossover is still in use, or, just before the TB if an FFP is being used) and locate the recirc valve at the turbo outlet. Recirc valve at the turbo outlet is the new normal for things like EFRs anyway. In the even of a recirc valve opening dumping all the air in the charge pipe, pretty much all of it is going to go backwards, from the TB to the recirc valve near the turbo outlet. But only a small portion of it (that between the TB and the AFM) will pass through the AFM, and it will pass through going backwards. The card style AFMs are somewhat more immune to reading flow that passes through them in reverse than older AFMs are, so you should absolutely minimise the rich pulse behaviour associated with the unavoidable outcome of having both a recirc valve and an AFM in the charge pipe.
    • Yep, in my case as soon as I started hearing weird noises I backed off the tension until it sounded normal again. Delicate balance between enough tension to avoid that cold start slip and too much damaging things.
    • I'm almost at a point where I feel like changing the alternator. Need to check the stuff you mentioned first though.
×
×
  • Create New...