Hd Diff + Transmission Mounts

[Fujiwara]

Does anyone have a DIY or a reference to one so i can install these items?

I have the following;

Nismo Diff Mount Bushings (Rear)

Nismo Lower Diff Mount Stopper Bushing

Nismo Diff Mount Bushings

Nismo Upper Diff Mount Stopper Bushing

NISMO Transmission Mount

What items do i need to take out to install these? (Gearbox / Diff etc)

And do R34 GTT's have a front and rear diff?

It's just a rear diff right?

ps. On a side not, if i was to purchase Engine mounts. Would the engine need to come off for the mounts to be installed?

Thanks in advance

[Duncan]

gearbox is really easy to do - support the rear of the gearbox (eg with a jack), undo the gearbox cross member and the mount then unbolts from the box. just be careful putting the bolts back into the crossmember they are easy to cross thread.

front diff doesnt have bushes it just attaches to engine. only on 4wd cars.

gearbox mounts can be done motor in, you lift it far enough to replace them. kind of fiddly though and you need an engine hoist.

rear diff mounts are an absolute disaster....don't do them without a hoist, full tools and plenty of time. the rear mounts into the subframe in particular are a pain to remove and replace but even diff in and out is trouble since you have to remove the attessa pump on top for 4wd.