Jump to content
SAU Community

Recommended Posts

The 14cm makes them actually quite responsive for a big single into the 4000rpm range but 700hp will become a pipe dream. If the K5-700R on cats RB26 is not reponding the way i want it to im going to go T78 14cm for drifting this year. I drove a T78 17cm GTS-T whilst in japan this trip and was very impressed at how flexible it was drifting with a close ratio box, creatd have one also here in aus and it is killer also...

What do you think about changing to HKS GT-RS 52T x2 turbo? I got an offer to swap it for my T78.

what other mods apart from the T78 does it have? cams etc?? cause if your still after 700hpatw the T78 17cm is a better option.

my sugestion is to drop to the 14cm housing and if you have stock cams fit gears and wind in 4-6 advance on the inlet and 3-4degrees retard on the exhaust and work from there.

if you still are not happy you could drop one size to the 29d i have seen this make 730ps with 272 and 280 degree camshalfs, 720cc injectors, twin Z32's on a 2.7litre @ 8500rpm.

what other mods apart from the T78 does it have? cams etc?? cause if your still after 700hpatw the T78 17cm is a better option.

my sugestion is to drop to the 14cm housing and if you have stock cams fit gears and wind in 4-6 advance on the inlet and 3-4degrees retard on the exhaust and work from there.

if you still are not happy you could drop one size to the 29d i have seen this make 730ps with 272 and 280 degree camshalfs, 720cc injectors, twin Z32's on a 2.7litre @ 8500rpm.

I have other cams, but i dont know what type. Twin Z32's. Power FC.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
    • Unfortunately, not only is that not the case, one of the main "Selling points" of safety over comms is they clearly state in writing that there's no need to segregate safety networks from non-safety networks. It always gets intermingled with everything else on an ICS/OT network. 
    • Hello. I have an a31 cefiro but since I am in Turkey we have a CA20S engine. I did some research. Then I found that I can swap with a ca18 but when I heard that it has the similar substructure as the s13. I thought I can swap with an sr20 because the sr20 was used with the s13. So can I easily swap the sr20 on my cefiro or is it difficult? 
    • I used to love stock take. I used to take f**k of a lot of stock. /Rodney Rude.
×
×
  • Create New...