Jump to content
SAU Community

Recommended Posts

yeah, definitely not cheap - try having 4 sets of rims! tyres are definitely on my no expenses spared list though.

one set for street, one set for motorkhanas, stockies for drag (which i just sold the other day) and a set of nismo lmgt4's which are somewhere on the atlantic. hello re55!

  Eug said:
one set for street, one set for motorkhanas, stockies for drag (which i just sold the other day) and a set of nismo lmgt4's which are somewhere on the atlantic. hello re55!

Yeah, I've got 3 sets of rims (I don't drag).

I've got a set of Nismo LM GT4s for circuit (<3 RE55s), my street tyres, and the stockies are wrapped in Nangkang NSII's. I was going to use these for the Circuit Club Nangkang Challenge (and for dori days) but I went to a skidpan day recently and didn't swap out my more expensive street tyres.

I'm tempted to run the Nangkangs at Eastern Creek on Friday and seeing if I can run under 2 mins, actually.

should we start an lmgt4 club? :D give the nankangs a go, it can't hurt.

however i have found that only the more premium brand and model street tyres perform well at track days. even then they only last a few hot laps before you see your lap times getting worse and worse.

i was paying around $250-300 per corner for some high end yokohamas that would last around 15-20,000km (street and track). money better spent on track rims with semi slicks.

for practices

every second wed arvo (not today, next week)

$40 to drive, $5 to watch

need a helmet, long clothes, battery bolted down ect

starts at 4pm till dark (nows the best time of year for it)

plenty of newbs, plenty of pros and plenty in between. 3 quarters of the feild is turbo nissan import though

most people think archerfeild is alot harder for a beginner over QR. probably because archy is really tight and technical whereas at qr you can just speed into a corner and wait for it to slide out and just try to hold it for the corner. non turbos struggle at QR though, mines screaming its tits off in 2nd but doesnt like 3rd. wish i had decent steer tyres though.

Was on semi-slicks, so I needed the rain as the tired old 97rwkw needed all the help (and revs) it could get! :(

drifty1km3.jpg

drifty2zf7.jpg

Does it on gravel most weekends tho :)

tmcc257fz2.jpg

New motor on the way for more N/A POWA!!!

Edited by screamin'
  • 2 weeks later...

Yeah the tape on the headlights means when you do tap something the glass doesn't fall out onto the track.

Also saves your lights from being broken by random stones.

baron - yup, it's primarily a gravel rallycar. Still need to do a bit more work to make it hook up on the loose stuff, but it is a hell of a lot of fun!

Id love to have a car like yours screamin!

You must have a fair few club events over there if most weekends? dam thats good!

*gets naughty thoughts of doing something similar to the r31 daily....*

  Eug said:
agreed, nothing like a dirty filthy thrash car for rallies and motorkhanas

It is a lot of fun. I keep the roadcar way too mint to drive on gravel roads or compete @ 100% so I had to get another one for that purpose.

As far as gravel rallycars go it's in really quite mint condition! :)

And yip, most weekends there is a sprint or hilclimb on. When they aren't on there is alway trackdays

(like yesterday :) )

sliideslidingmh6.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I was just driving into work and while on my drive, I went to accelerate and noticed the car would sputter/hesitate and I’d hear a few pops from the exhaust before it started going faster. Then I also noticed that when I push my clutch in, the car would die. This all started happening today. Any ideas?
    • That is a lovely Volvo, just saying. Yes I should have got an 260RS when they were cheap. I do regret now.
    • ^ lots of good points made above. The thing is, "aggressive" or "flush" fitment is relative depending on how much you have been influenced by social media. My starting point is always "look at the Nismo RWD specs". That is where you should start, then start measuring as GTSBoy as sort of mentioned, because every car will be slightly different. My 8.5"+35/9.5+38 will not be "flush" enough for you because you want more "pumped" look, which is why you measure. Tyre sizes and brand/models also make a difference. Some tyres are more chunky/square, some are more rounded. That means you could get away with more aggressive offsets without rubbing. But then it also depends on your ride height. Also depends on how much your car copped damage before being shipped from Japan. So it goes back to measuring your car yourself and determining what can work. Those Nismo specs are used bacause it's a safe spec for standard car (suspension. body) with chunky tyres. But then I put 265/35 wide tyres on R34 GT-R wheels, and currently run 285/30 tyres on 18x10 wheels.
    • Sounds pretty awesome. I recommend creating a new build thread and posting all your goodness in there.
×
×
  • Create New...