What Turbo For 250+rwkw

[r33madd]

Hey all this year is time for project 250rwkw.

at the moment im sitting at 201.3rwkw with factory turbo.

so whats a good turbo upgrade and what other parts will i need to get my goal.

Currently my mods are

HKS Hiper Turbo back exhaust and HKS muffler

HKS super flow pod filter @ CAI

HKS EVC 5 boost controller @ 12psi

Apexi SAFC-II

Greddy Type R blow off valve

Autobarn88 600x300x76 intercooler

Sard Fuel pressure reg

Walbro 500hp Fuel pump

NGK Iridum Spark plugs @ .8mm

Splitfire Coils

Nismo G-Attack suspension

[R33GOD]

been covered heaps of times. if you want to still retain stock like response and make 250-260rwk go a gcg hiflow

[fresh]

hi-flow if your comfortable with a rebuilt turbo

otherwise the gt-rs is quite a nice turbo and has a bit more headroom if you want it

[SKYRYAN]

Can you just bolt in a HKS GT-RS, or do you need to upgrade ECU?

At the moment I have 3" Turbo back, FMIC, SAFCNeo, EBC, Tomei Fuel Pump.

Standard injectors/ECU.

[mesmerized]

http://www.skylinesaustralia.com/forums/Rb...hl=dyno+results

but i dare say gtrs is the best bet if you're not on too much of a budget otherwise

http://www.skylinesaustralia.com/forums/Ni...et-t200277.html or a high flow

yes, if you want to get any benefit of a gtrs you need to upgrade your ecu, injectors etc

o and ibtl, it's been covered so many times.

Edited January 14, 2008 by into oblivion

[R31Nismoid]

Sorry mate, but there are a dozen fully detailed RB25 - 250/270rwkw threads.

It upto you now to go and read the info and decide what fits your requirements.

Thanks.