Jump to content
SAU Community

Recommended Posts

Spunkey Munkey had his wing sprayed there. Job looks pretty decent. Shouldn't have any problems with them i reckon.

Their workshop is pretty hard to find. It's at the back of this milk bar place along a main road. You won't see any sign or whatsoever like ' primal garage ' . Best to ring them up to let them guide you there.

Highly doubt it Matt, there's bit's and pieces of it all over Melbourne at the moment :huh:

Gearbox is getting done as we speak, as is the engine bay prep, and the engine is ready to go. It's just getting it all back together now...

I'd love to go to Winton though, if not only to see what you and Ray have going on now! :/

Hehehe. My car is slow. Ray is the one to watch.. have you heard his wastegate? fark i wouldn't be surprise if the guys at eastern creek could hear it :)

Looking forward to seeing you on the track again, I'm hoping to at least improve my times at Winton in Feb!

I don't believe you... :)

I see lots of part selling, which equals lots of new part buying haha I'm hanging to get back out there again, it's been way too long!

Is Ray's car back up and running again? I'll have to pop past and check it out/sabotage it :D

  • 2 weeks later...
Stolen_S15: Just thought I'd let ya know that Primal did a top job on my car, couldn't be happier.

Two thumbs up from me!

Cheers Dane,

I'm hoping to pick my bar up today or early next week. Was yours the 180 that was in there getting sprayed, widebody? SAU stickers and what not on it?

Cheers Dane,

I'm hoping to pick my bar up today or early next week. Was yours the 180 that was in there getting sprayed, widebody? SAU stickers and what not on it?

Yep, that's the one. The 180 that's in a million pieces... :D

SNISMO: They were doing mechanical work while I was there.

Yep, that's the one. The 180 that's in a million pieces... :D

SNISMO: They were doing mechanical work while I was there.

Yeah they are happy to do minor mech. work.

I'll be picking up my bar in the next day or so, i'll let you all know what the work is like.

Could someone please post up some contact details for Primal Garage ?

Ask and you will receive...

David and Neil do all the mechanical work, i.e. electrical, suspension, engine work etc.

And they're father, Ray, I call him Uncle Ray - does all the panel and paint work...

They're a nice bunch of people, down-to-earth and very helpful...

Say Kevin with the r33 Skyline and Ray will look after ya as I got there all the time...

Contact details are here...

http://dive.to/PrimalGarage

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...