Jump to content
SAU Community

Recommended Posts

I'm over jap cars! When you go prestige you will never go back.

Try it one day you will know what I mean - Then realise you use to be a hoon - Then realise why everyone hates them and join them hating them. :-)

Jap cars were good 5 years ago when everyone left you alone but now everyone is against them.

Go prestige - No defects - No EPA's - Save on Petrol. And all you need to do is put a set of sexy wheels on.

Wholeheartley agreed.

I don't own any prestige car at the moment but I am hoping to buy a 2006+ Bmw series 3 by end of this year fingers crossed. For the amount I'm going to spend, i could perhaps own a evo x as i believe jap cars do have the sheer grunt and power, no one can dispute that but end of the day, they severely lack in class and looks.

I am beginning to notice more Audi, Merc and Bmw's in Melbourne's inner cbd and it's surrounding vicinity.. This city is slowly but surely transforming into a high class city, after all, it is Australias fashion capital.

My friends live in areas where every 2nd car parked in the drive way is a German built car and when i go out for coffees or dinners in these areas, i do feel like a major hoon in my Skyline even though my car is fairly moderately modified.

I think the Bmw's new 3 series look great with its smooth curves.

bmw-3er-silver-exterior.jpg

Edited by Barbarian
  • Replies 213
  • Created
  • Last Reply

Top Posters In This Topic

Driving a jap car around the more affluent suburbs full of German cars is great because there aren't anywhere near the amount of police around to hassle you as there are compared to suburbs where most the streets are scorched with burnt rubber.

That is except for anywhere around Chapel Street and Dandenong road

I am beginning to notice more Audi, Merc and Bmw's in Melbourne's inner cbd and it's surrounding vicinity.. This city is slowly but surely transforming into a high class city, after all, it is Australias fashion capital.

My friends live in areas where every 2nd car parked in the drive way is a German built car and when i go out for coffees or dinners in these areas, i do feel like a major hoon in my Skyline even though my car is fairly moderately modified.

What model are you going to be going for in the 3 series?

Correct me if i'm wrong but top spec (before m3) is the 335i (twin turbo 6cylinder). These do come in sedan form aswell correct?

Whatever you buy just make sure it's black :P

Yes I will give you the fact that Euro cars are prestige etc.However thats about it.I been behind the wheel of a few of them and honestly they are just ordinary cars that are ridiculously overpriced.Sure they may be a little quieter than most cars.And as far as build quality.they went down the toilet years ago.Ask anybody who ever works on one-They are just as big a shitheap as any falcadore.As far as I am told most of the mercs get their parts from Korea.I used to work in an unnamed company that had 50 Merc Sprinter vans...Every one of them blew gearboxes before hitting 100000 km..! ( $15000+ for the tiptronic auto )Then the diesel fuel injection systems started shitting themselves as well as computer glitches that wont allow it to go out of nuetral, doors that dont shut properly. I think VW is the best quality car in Germany right now...At least they are reliable

Im not over Japanese cars, but I am on a "break" from them, after nothing but turbo cars for the past 13 years its kinda nice to be driving a N/A v8 for a change. My Xr6t changed my mind on the whole japcar scene, I really dont go 'driving' much at all these days, most of what i seem to do is boring stuff to & from work etc....

Must be getting old! :P

Who else is feeling the same symptoms?

They just don't seem to have that "classy" or "elegant" touch in them, no matter what car or what brand, it's still a Jap car end of the day.

When driving around in Melbourne's higher class suburbia, you feel like a foreigner in your Jap vehicle.

sounds like you're trying to ' keep up with the jones's.' does it really matter what other people think about what car you drive.

if you drive an modified import you're pigeon holed as a hoon, if you drive a prestige car you pigeon holed as a snob.

personally i think prestige cars are rediculously overpriced and a complete wank, where you often pay >60K for something with a 2.5 litre engine, a hole bunch of electronic gadgets that break soon after the warranty runs out, and a brand name that's supposed to say 'look at me i'm successful'

maybe i just feel that way cause i work in 'upper class' mosman (sydney), and serve alot of customers owning poodles, driving bmw's/mercedes with superiority complexes

not trying to be rude, maybe i'm reading it wrong, i don't know, and that you meant you're in the market for a car that has a nicer interior and that looks more civilised than an evo etc??

lol as if a run of the mill predominantly junior marketing intern owned 3 series beemer is a sign of luxury. that's like assuming sipping cheap champagne in copious amounts at melbourne cup day can turn you from a skank to a lady.

down the track i'd be definitly considering a higher class euro car with some balls and hopefully be in the position to keep the liner as the fun weekender. i just want to drive a pimped out audi merc beamer or bentleigh's like all those rappper's do before lights out.

Ummm the Quality?

Its just like saying what can you get in a Skyline that you can't get in a Holden in the same price range?

your comparing lemon's with mango's

wat quality?

2 of my mates bought a 318i and a holden statesmen of the same year from the same dealer. the bimmer's broken down 3 - 4 times already and cost about 3 grand to fix. the stato's runnin like brand new. not saying holdens are better or that i'd ever choose a holden over a euro but yeah...

quality my arse, you think all mercs are bulletproof just coz they're mercs? they're made in mexico ffs

just my opinon but if i was to ever go euro i'd get somethin from the $100K+ range and from italy but since i dont have that sorta money ima stick to what i can afford lol

My friends live in areas where every 2nd car parked in the drive way is a German built car and when i go out for coffees or dinners in these areas, i do feel like a major hoon in my Skyline even though my car is fairly moderately modified.

bmw-3er-silver-exterior.jpg

I live next to the city. I drive an r34. The cars in my apartment carpark are, Porsche GT3, Porsche 911, bmw M6, bmw 3 series, 5 series, 7 series X5s, mercs e class, s class, you'll prob end up a millionaire if there's a grand theft auto :blink:. Anyway, I don't feel anything at all. We drive pass each other looking at each other's cars with a smile in our face.

I'm still young, not even mid 20s yet, i feel that driving an import at our age is perfectly fine. However, when i reach my late 20s, i'll be planning to get a euro car BUT still keeping an import as a toy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • She swallowed the spider to catch the fly.
    • Half anticipating the next question then: I have two magnets stuck in my oil pan. What should I do? 
    • If it's magnetic what is stopping you from using a magnet on a thin wire from fishing it out?
    • Those 2 solenoids in that assembly I mention, are the PWM solenoids for torque converter lock-up clutch & EPC (line pressure control) ~ when most folks hear of 'solenoid failure', the tendency is to think electrical failure...but fact of the matter is, especially wrt the EPC solenoid (which is moving/running all the time), you can have an electrically 'good' solenoid, that's absolutely broken/worn out mechanically inside...ie; valve plunger return spring rubbing against spring retainer plate, lowering preload pressure.. ...and the solenoid armature extension limit spring wafer with bad wear/broken off petals... ...and if there's ever been any metal flying about, damage to the valve plunger end itself... ...the stuff one never really sees, unless you go the whole 10yards trying to answer the question "why is my line pressure screwy, but TCU isn't flagging any EPC solenoid fault?"...and carefully dissect the solenoid. Worst (and most probable) scenario is when the plate spring petals break off, they get held by the magnetic flux, get mashed up by the armature into little bits, which end up in the space between the armature & shading core bore, and things get stuck or randomly jam up, and your line pressure goes flat and doesn't change...and the TCU never sees it, as it doesn't actively monitor LP... ..then it gets into insidious land, if you end up with lower than expected line pressure...lets say high clutch..and the lower pressure causes it to slip ~ when I say 'slip', think say 2000rpm on the drive plates, and 1800rpm on the driven plates, because the slip is making them under-rotate by 200rpm ; you get all the usual nasties like heat and band/clutch wear, but even if it's only 20rpm slip the same thing happens...and... you'll hardly ever pick this up driving the thing with the torque converter active as it effectively masks these sorts of slippages that are line pressure related ...(the newer TCUs can detect clutch slip rate)...just  FYI as it were...  
    • There's nothing that some paddle pop sticks and extra cable ties can't fix.
×
×
  • Create New...