Jump to content
SAU Community

Recommended Posts

hey everyone, i recently got a new job and i have to drive pass around 3-4 speed camera twice a day.

so this is making me a bit edgey so i just want someone to help me clarify:

1, how much km do u have to go over the actual speed limit until you get snap

2, how long will it take for them to send a fine letter IF i did get caught

-pete

Link to comment
https://www.sau.com.au/forums/topic/201850-questions-about-fixed-speed-cameras/
Share on other sites

1. usually over 10% of the speed limit, ie over 88 in 80 zone

2. not really sure on this but i think someone mentioned 6-8 weeks or something..

I've heard of many cases where they've been set to less than 10%.

DO NOT speed past them.......

From big-ass trips... speedos are usually set to be lower than the speed you're doing.... If you use a nav. unit, it always displays that you're travelling slower than what the speed ostates (they might not take into consideration contours however)... But the speedo-checks on highway to melbourne registered same speed as GPS; which was at least 7km/h under what the speedo read. - so don't get paranoid, but don't exceed the limit. Driving instructors recommend 3km under speed limit to do driving tests :blink:

I thought fines always come within 2 weeks?

Keep in mind that if is IS 10%, it's still not going to be a good measure, due to inaccuracies in your speedo, the camera etc. Just do the speed limit through the camera.

thats when a pfc commander comes in handy :blink:

If you know where they are why would you speed past them?

:blink:

like a few people have said, speedos in cars generally read about 5km/h over what you are doing. so if the speedo says 100 youre doing 95. so if you go through a speed camera on, or even slightly above the limit, you should be right.

cops with radar/lidar ive heard need to give a 10% leeway. add into account that your speedo is high as well..

many times ive been in a 100 zone, with the speedo reading 110 to 115, and a cop has been there, and i havnt been done.

10% are you kidding me? lol. It's more like 2 or 3km/h. so 63 in a 60 zone will most likely see you booked, as will 103 in a 100 zone. I have no idea who came up with this 10% theory, but it's bullshit.

10% are you kidding me? lol. It's more like 2 or 3km/h. so 63 in a 60 zone will most likely see you booked, as will 103 in a 100 zone. I have no idea who came up with this 10% theory, but it's bullshit.

your theory is no better

it's definiately not 2-3km/h

Too lazy to edit but:

http://www.skylinesaustralia.com/forums/in...t&p=3560020

afraid to say.. not a good year for me :)

Just curious to know, do policemen have a Flash on their Radars?? or any other speed recording device (Laser)? etc

I was doing abt 111kmh in a 100 zone :D:( silly me,

I think i saw a flash from behind some trees and an un marked commodore parked some 2km down on the M4

can't be sure if it was me, as there were a few other cars around me doing the same speed...

but then again, i can't even be sure if it was a police flash or some blue light i saw through the trees in a factory or sumthing else :D ..........

dam , sooooo anxious. hope i dont get anything in the mail.

Most radar's do not have a flash, if the radar operator sees someone doing high speeds they would radio the chasing car (in this case I assume it would be the unmarked commonwh0re parked 2km down the road) telling them that x person is speeding and to chase em down.

However there are new radar setups where the radar is on the ground and the camera is behind it. They need to have a good lock on ~3secs then takes a photo immediately. Quite easy to notice this.

I think all police officers are being currently trained to operate radars, all HWP's know how to use radar's already.

As for your case, ADR's specifies 10% tolerence for speeds, so maybe you are being paranoid.

from

http://rvcs-prodweb.dot.gov.au/files/ADR%201803.pdf

5.3. The speed indicated shall not be less than the true speed of the vehicle. At the test

speeds specified in paragraph 5.2.5. above, there shall be the following relationship

between the speed displayed (V1 ) and the true speed (V2).

0 ≤ (V1 - V2) ≤ 0.1 V2 + 4 km/h

The equation means as follows:

95 Being Indicated speed 90 being true speed.

0 <= 95 -90 <= 90*0.1 +4

0 <= 5 <= 13

So there for Indicating 95 but going 90 is in the acceptable range. Were are as

110 Being Indicated speed 90 being true speed.

0 <= 110-90 <=90*0.1+4

0 <= 20 <= 13 Which means its not acceptable.

So the allowable difference depends on the speed the car is actually traveling.

Put easier, your indicator must NOT be showing a slower speed then the car is travelling, and it must not indicate more the 10%+4km of the true speed

So In a 60 zone, your indicated speed must be between 60-70 to be ADR approved.

In a 80 zone, 80-92

In a 100 zone, 100-114

In a 110 zone, 110-125

10% are you kidding me? lol. It's more like 2 or 3km/h. so 63 in a 60 zone will most likely see you booked, as will 103 in a 100 zone. I have no idea who came up with this 10% theory, but it's bullshit.

You are wrong as far as NSW goes ( as we speak, plans are in place for much less leway) but you are correct as far as VIC goes, 63 in a 60 zone ,84 in a 80 zone and they get you. This is speed cameras only, its up to the cop if its a none camera speed trap. What gets me in the case of VIC is the fact that the equipment they use to measure speed has a plus or minus 3% accuracy according to manufactures guidelines, if I was booked for doing 63 in a 60 zone I would defend it in court and I would win everytime!!

yeah true. I still don't believe it's anything like 10% though. Someone please drive through a 110 camera at 122 and tell me what happens :P my guess is fine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They are what I will be installing. 640s for me.
    • Hmm... From my experience you get about 0.25° camber change per mm of RUCA length change. So, to correct from -2.5 up to less than -1° (or, more than -1° if you look at the world as a mathematician does) then you'd be making 6-8mm of length change on the RUCA. From a stock length of 308mm, that's 2-2.5% difference in RUCA length. My RUCAs are currently very close to stock length - certainly only 2-3mm different from stock. I had to adjust my tension arms by 6mm to minimise the bump steer. That's 6mm out of 210, which is 2.8%. That's a 2.8% change on those, compared to a <1% change on the RUCAs. So the stock geometry already has worse bump steer than is possible - you can improve it even if you don't change the RUCA length. If you lengthen the RUCAs at all, then you will definitely be adding bump steer. Again, with my car, I recently had an unpleasant amount of bump steer, stemming from a number of things that happened one after another without me having an opportunity to correct for them. I only had to change the tension arm lengths by 1mm to minimise the resulting bump steer. (Granted, I also had to dial out a lot of extra toe-in in the rear, and excessive rear toe-in will make bump steer behaviour worse). Relatively tiny little adjustments having been made - the car is now completely different. Was horrifying how much it wanted to steer from the rear on any significant single wheel bump/dip. And it was even bad on expansion joints on long sweepers on freeway entry/exits, which are notionally hitting both rear wheels at the same time. My point is, the crappy Nissan multilink is quite sensitive to these things (unlike the very nice Toyota suspension!). And I think 99.75% of Skyline owners are blissfully ignorant of what they are driving around on. Sadly, it is a non-trivial exercise to set up to measure and correct bump steer. I am happy to show my rig, which involves nasty chunks of wood bolted to the hub, mirrors, lasers, graph paper targets and other horrors. Just in case anyone wants to see how it is done. I'll just have to set it up to take the photos.
    • What do you have in that bad boy ? Ill go with the 725cc since I'll be going with Nistune ( would definitely like more engine protection but Haltech is too far out of reach at the moment... plus, Ill probably have a pretty safe tune as its a daily, not gonna be chasing peak power 24/7 ahahah ). Are Xspurt a safe choice?  Pete's great. He didnt mention anything about traction arm length so I reckon it may be good. When I get some new wheels/tire later down the road I'll ask him about it and get his opinion on em. I heard from Gary that you've got the bilsteins too, are you running the sway bars too? and what other suspension goodies do you have installed or would recommend?
    • In true Gregging style...  
×
×
  • Create New...