Jump to content
SAU Community

Crank For Rb30de/tt

nsmo30tt

By nsmo30tt,
in Engines & Forced Induction

 Share

Recommended Posts

nsmo30tt Enthusiast

nsmo30tt

Posted
Posted

i dunno if this is the right place to post this at but i was wondering..ive heard rb30's only go to around 7.5k revs and also that the crankshaft is very flexibly... so getting new high performance/custom built crank allow the engine to go over 7.5k revs.. this engine is going to have huge power so conrods pistols ect will be forged so now just wondering about the crank.. so if anyone knows anything about this or can help.. please tell me all ..also if anyone knows where to buy high performance cranks for rb30 blocks .. or maybe where to get one custom built

Link to comment
https://www.sau.com.au/forums/topic/201957-crank-for-rb30dett/
Share on other sites
342Four Grand Master

342Four

Posted
Posted

its not so much the crank failing as it is the block 'letting go' above 7-7.5k rpm

the rb30 block doesnt have internal bracing ribs like the rb26 does - so it has the ability to flex more and there is the potential for it to throw a piston or rod at or above those rpms

nsmo30tt Enthusiast

nsmo30tt

Posted
  • Author
Posted (edited)

hmm im starting to think that 25/30 26/30 isnt the best thing.... at the end of the day all i care about is what can put out the most power i know theres some rb26s that put out huge power.. i was thinking that a 25/30 26/30 with lots of time and money spent on it would be better than a 26 and the 25/30 26/30 looks like its becoming much more popular now ive just never seen one heavily modded witch id like to do but then i suppose the block cant handle it coz everything else is guna be changed with performance parts and that and something has to give so i suppose its the block... so yeah in everyones opnion/statistics what will give higher power when heavily modded

EDIT: grout fill.. hmmm interestin anyone care to go into more detail ive had a quick look on google not the greatest but if any1 has any info about this that would be great

Edited by rb30de
nsmo30tt Enthusiast

nsmo30tt

Posted
  • Author
Posted

well i want to push out atleast 800hp guna have 2 2000hp turbos or maybe 2 smaller ones from garrett but still 1400,its guna be a drag car/street racer im still going to drive it around so i need to keep it street legal some people may think im dumb for wanting to do this or whatever thats there opnion i know of a few ppl who have done it/do and im being serious about the hp i want huge power

nsmo30tt Enthusiast

nsmo30tt

Posted
  • Author
Posted

in answer to

*Why would you have 4000hp worth of turbo to make 800 hp?

i said atleast 800 and just coz u have 2 2000hp turbos isnt going to make it a 4000hp car

*my rb26/30 has a standard rb30 crankshaft with built up oil pump drive to suit jun pump then nitrided has seen low 9sec ets and over 1000rwhp on dyno

dam thats pretty nice, i was also wondering about heads 25 or 26 i wana go with the 26 even tho the 25 is much cheaper but what would be better..including the fact that i will change cams ect ..but would it be better to go with the 26 with the hydralic lifters **1000rwhp on dyno** << is that still on the std 26 hydralic lifters

Adriano Grand Master

Adriano

Posted
Posted (edited)

26's dont have hydraulic lifters. Im pretty sure you wont fit one 2000hp turbo in an r32 gtr engine bay, let alone 2. I know this may sound silly, but have you considered the fact that an rb30 with 2 turbos that size more than likely wont make 800hp, more like 300hp

Edited by Adriano
nsmo30tt Enthusiast

nsmo30tt

Posted
  • Author
Posted (edited)

oh i always thought they had hydraulic lifters anyway yeah well 2000 is a bit over the top but i still want to get either the 1000 or 1400, ive seen 2 1400's on a 26 they look huge when there bolted on 2 the engine but one goes on top and the other sorta goes down the bottom and sucks air from there, thats also sorta how the hks skyline has it there not really big in size the turbo it has but it has huge power

Edited by rb30de
RB30-POWER Mentor

RB30-POWER

Posted
Posted (edited)

can i ask how old you are, your posts are beginning to sound like a kid on shool holidays is posting the questions, especially all the sms/slang text in your posts?

have you done any research at all on the subject?

do you understand the costs involved, you talk about the head being cheaper if you go 25, nothing about this will be cheap at all?

my advise is if you have the money and are legit, go and approach a well known workshop and get them to build you a package, might be the safest bet, that way you don't need to waste money on R&D and get backup support.

Edited by RB30-POWER
nsmo30tt Enthusiast

nsmo30tt

Posted
  • Author
Posted (edited)
can i ask how old you are, your posts are beginning to sound like a kid on shool holidays is posting the questions, especially all the sms/slang text in your posts?

have you done any research at all on the subject?

do you understand the costs involved, you talk about the head being cheaper if you go 25, nothing about this will be cheap at all?

my advise is if you have the money and are legit, go and approach a well known workshop and get them to build you a package, might be the safest bet, that way you don't need to waste money on R&D and get backup support.

I'm 17 years old and no I'm not on school holidays I've been out of school for two years now and about the sms/slang text I find it much faster and easier to do.. also I have done a lot of research.. I don't know if you noticed but, thats why I'm asking these questions. Yeah well by the way 25 is cheaper if something is cheaper its cheaper, I never said once anything about this being cheap.. now did I? It's now that I have gathered a descent amount of cash so I can afford to start a project like this. I am legit and I have no intentions of getting any workshop to do this for me, it is intended to be a project and from what I've seen on some sites to get this built is expensive and they have pre-made kits which doesnt suit me because its not the parts that I want at the end of the day.

Edited by rb30de
[200] Mentor

[200]

Posted
Posted
well i want to push out atleast 800hp guna have 2 2000hp turbos or maybe 2 smaller ones from garrett but still 1400,its guna be a drag car/street racer im still going to drive it around so i need to keep it street legal some people may think im dumb for wanting to do this or whatever thats there opnion i know of a few ppl who have done it/do and im being serious about the hp i want huge power

lol

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
Why would you have 4000hp worth of turbo to make 800 hp?

Exactly.... The comment of 'im still going to drive it around so i need to keep it street legal'

Thats just crazy talk :P

You will NEVER, EVER get a 800hp+ car road legal.

If you go trying to build a 800hp+ RB30DETT in your backyard, i wish you the best of luck rb30de, because you'll need as much as you can find.

A figure not far short of 30-40k to begin with also... so its not cheap, its not expensive... its more than a moderate house deposit.

To start, 1000hp turbos x2 is just plain crazy talk for anything less than a 1500hp motor. You dont, wont, ever need them and you'll be slower because of it because they are simply useless.

You need something far more appropriate like a 800-900hp turbo - one of them.

I suggest you spend some more time reading, understanding and learning before you go aiming for Jupiter.

The faults, issues your talking about aren't accurate, nor are your aims, parts or much else for that matter.

Read the RB30 sticky thread, it has SOOO much information, and at 17, im sure you've got plenty of time

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Turn signal wiring question

      By Dose Pipe Sutututu · Posted

      Convert to dual filament bulb   FWIW, it will look odd - I dare say a bit dumb as it looks like your flasher relay has shit the bed.
    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy · Posted

      If the RB20 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • GTSBoy
      Turn signal wiring question

      By GTSBoy · Posted

      Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
×
×
  • Create New...