Jump to content
SAU Community

Rims To Fit R32 Gtr?

dougs

By dougs,
in Exterior & Interior Styling

 Share

Recommended Posts

TezGT-R Rising Star

TezGT-R

Posted
Posted

Ive got Nismo LMGT3s on my 32GTR. 17 x 10" and they clear my F50 brembos with about 3-4mm gap and just fit inside the guards (you cant fit your hand on top of the front tyres). Any bigger than this i reckon youd need to roll guards

post-46532-1201507449_thumb.jpg

dougs Community Regular

dougs

Posted
  • Author
Posted

ok guys i found a set of Volk F-Zero Challenge rims in 18x8 at the front and 18x9 at the back, i've asked a few people who deal with imports etc about the offset because the rears are +45, but i'm not sure of the fronts, and i got told that should be fine because there's huge amounts of space under there before anything will hit the coilovers. they said i could go for an 18x10 with a slightly smaller offset and still not have to worry about any hitting or guard rolling. anyone got any comments/experience they wanna share?

dougs Community Regular

dougs

Posted
  • Author
Posted

yeah i know. i've already got 235/45's for the front so going 265/40's on the back will be a perfect match. if all else fails i'll just do 235/45's all round, it won't make any difference, they should still fit up nicely. i was more concerned about the offset than anything. as long as the fronts are somewhere between about +25 and +35 i should be fine. and considering the rears are +45 i can't imagine the fronts being any smaller than +30.

dougs Community Regular

dougs

Posted
  • Author
Posted

anyone have any objections to the +45? lol. according to the offset calculator they'll only stick out 6mm further than the standard rim but will be 20mm closer on the inside cause the standard offset is +38 for the 8" wide gtr rims right? sorry to harp guys, its just that i'm looking to pick these rims up tomorrow and hope to not have any fitment problems lol. so any advice would be great. thanks.

adam-__- Grand Master

adam-__-

Posted
Posted

+45 offset it pretty high and 20mm LESS inside clearance would be a problem I would assume. I agree with SoFly, get something in the +20's range or even less for that width.

If that's what you want though, trial fit.

Merli Grand Master

Merli

Posted
Posted
anyone have any objections to the +45? lol. according to the offset calculator they'll only stick out 6mm further than the standard rim but will be 20mm closer on the inside cause the standard offset is +38 for the 8" wide gtr rims right? sorry to harp guys, its just that i'm looking to pick these rims up tomorrow and hope to not have any fitment problems lol. so any advice would be great. thanks.

You didn't mention the width of the wheels (offest and width work hand in hand to determine fitment and stance), but I can tell you that I'm 99% sure that they're not going to sit flush the guards at all... They'll sit in the guards and won't look as good as proper offset wheels.

Look for +22 offset in a 9" wheel for good fitment on an R32 GTR.

Bonsai Enthusiast

Bonsai

Posted
Posted

read what I wrote before. If you don't know what your doing when it comes to offset its going to look stupid and defect magnet. IMO If you put on +35 or greater the rim is going to stick out plus rubber. Its going to look tough but also stupid at the same time if you know what i mean. Also you prob going to need spacers if you get the wrong offset that is also crap and extra money. If you put smaller wheels on front and bigger on the back that should be ok with GTR but it looks better when its even and better handling as well and not to mention a nightmare to get your wheel alignment sorted out for the x time your chamber will shift so extra money plus have fun selling this set when you plan to upgrade or sell your car. hope that helps.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • eli995
      NPboosted manifold fitting purpose

      By eli995 · Posted

      Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • eli995
      NPboosted manifold fitting purpose

      By eli995 · Posted

    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...