Rb25det Spec2 With The Emu

[JonTurpening]

Just read the post on the emanage that Uras put up but I wanted to know who all here is running the EMU on their RB25DET. If they could give me a list of part numbers that I’ll need for the EMU, the map sensor and any other parts that I might need so that I can install it and run without a MAF. Also if anyone is running a wide band O2, what brand and is it worth it to have it “self tune”. Are you happy with it, how does the car behave day to day and the like. Does it do full on ignition tuning? Is there anything special I need to know about setting it up for the rb25det spec 2?

I am trying to weigh my options as I had a blue on a DSM and ended up going with the DSM link because the emanage didn’t do timing. I would like to get a Power FC but they have gone nuts with the price of a used one!

Thanks again guys.

[robots]

Innovative LC-1 or LM-1 wideband, greddy emanage ultimate pressure sensor, pressure sensor harness, a/f harness. It will work as stock ECU, until u play with the settings. I have this setup with my rb20.

http://www.mohdparts.com/emanage/

How it helps.

Edited January 18, 2008 by robots

[JonTurpening]

Thanks. I'm just trying to weigh my options. My local tuner is not real big on them but he has only done one Ultimate and it was installed with a greddy turbo kit.

Does the self tuning work pretty well?

Innovative LC-1 or LM-1 wideband, greddy emanage ultimate pressure sensor, pressure sensor harness, a/f harness. It will work as stock ECU, until u play with the settings. I have this setup with my rb20.

http://www.mohdparts.com/emanage/

How it helps.