Jump to content
SAU Community

Recommended Posts

Some info on the S2 pads, seems they are the same as some infinitys and 2006 on non-brembo 350Z's, which i dont think we got here. Must be a decent pad if they are still using it on performance cars. Anyway, may be helpful for some trying to track down a pair...probably from overseas, although Bendix list the rears.

fronts:

http://catalog.hawkperformance.com/h_produ...any_id=10028147

http://www.endless-sport.co.jp/brake_pad/s...rn/ep/EP373.pdf

http://www.project-mu.co.jp/matching/pad/i...nissan/F239.pdf

Rears:

http://www.bendix.com.au/ProductCatalogue....amp;Hash=655370

http://www.project-mu.co.jp/matching/pad/i...nissan/R234.pdf

http://www.endless-sport.co.jp/brake_pad/s...rn/ep/EP285.pdf

http://catalog.hawkperformance.com/h_produ...any_id=10028147

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

G`DAY ALL,Went & had a chat with the brake bonder`s here in WA,to see what other state`s do brake bonding(brake bonder`s ),he told me that it is only them ???,I was hoping that we would have one in each state but no luck.so look`s like all pad`s will have to come out of WA,hope to have some idea on the weekend of what the cost will be,pad`s weigh just under 2kg`s,talk soon,cheer`s chuckie.

The compliancers have to put on new brake pads by law. Surely they must have a local supplier for this task. How could we find out?

The compliancers have to put on new brake pads by law. Surely they must have a local supplier for this task. How could we find out?
G`DAY LAD`S I don`t think that any of them would change PAD`S,mine were NOT changed,I was chasing Pad`s soon after getting my car.That`s why i have been looking for pad`s for so long,WITH OUT PAYING RIPOFF price`s.ALSO LOOK`S like MN35 share same front pad`s as series 2 so,could any of the MN35 owner`s please have a look to see if this is so ???,Look forward to hearing from some one on that one.LOOKING at the cost of the REBOND`S to be $120 + post,this will be for EXCHANGE PAD`S,If you do not want EXCHANGE THEN that would cost more as i will have to get more backing plate`s cut,I would like to set ONE person up in VICTORIA,NSW & QUEENSLAND,Then that would make it a bit better for picking PAD`S up,HOPE TO HAVE TWO SET`S IN EACH SPOT,then the old pad`s come back here for REBONDING,PLEASE PM ME IF YOUR INTERESTED,cheer`s chuckie,
G`DAY LAD`S I don`t think that any of them would change PAD`S,mine were NOT changed,I was chasing Pad`s soon after getting my car.That`s why i have been looking for pad`s for so long,WITH OUT PAYING RIPOFF price`s.ALSO LOOK`S like MN35 share same front pad`s as series 2 so,could any of the MN35 owner`s please have a look to see if this is so ???,Look forward to hearing from some one on that one.LOOKING at the cost of the REBOND`S to be $120 + post,this will be for EXCHANGE PAD`S,If you do not want EXCHANGE THEN that would cost more as i will have to get more backing plate`s cut,I would like to set ONE person up in VICTORIA,NSW & QUEENSLAND,Then that would make it a bit better for picking PAD`S up,HOPE TO HAVE TWO SET`S IN EACH SPOT,then the old pad`s come back here for REBONDING,PLEASE PM ME IF YOUR INTERESTED,cheer`s chuckie,

The M35's use different front pads to C34's, cross referencing some Japanese pad sites, looks like the early M35's may use the same front as the J31 2003 on Maxima, DB1485, and the later ones use the V35 Skyline pad. Havnt checked rears.

http://www.bendix.com.au/Catalogue/BrakePr...PDFs/DB1485.pdf

http://www.project-mu.co.jp/matching/pad/i...nissan/F209.pdf

http://www.project-mu.co.jp/matching/pad/i...nissan/F250.pdf

compliancers are 100% required by law to put brand new, factory pads on. But they just buy them from nissan - I'm sure you can get pads from nissan too (think 6 week lead time and around $250 a pair)

compliancers are 100% required by law to put brand new, factory pads on. But they just buy them from nissan - I'm sure you can get pads from nissan too (think 6 week lead time and around $250 a pair)

They may be required to, however didn't in my case either. They may be having the same trouble we are...

When I bought some genuine Nissan Pit Work Stagea Series II 4WD front brake pads from Japan this was written on the box:

Part Number: AY040-NS129

Fuga [Y50]: VQ25DE, VQ35DE - '04/10-

Skyline [V35]: 350GT - '04/11-

Also stamped into the pad itself: HITACHI HP63H FF

Cost me ¥11,025 (about AU$110 at the time)

Rear: Part number 44060-AR085

Stamped in pad: HITACHI HP62 FF

Cost: ¥8,269 (about AU$81 at the time)

Hope this helps

For those interested I ran a set of Chuckie's re-bonds around Wanneroo raceway on Thursday night. About 40 laps with no problems at all. They got plenty hot enough too, so hot that the fluid started to boil at one time, which meant that the pedal nearly went all the way to the floor. After a cool down lap and 5-10 mins before I went out again, they were cool enough and fine for the rest of the evening.

I am very happy with my purchase!

For those interested I ran a set of Chuckie's re-bonds around Wanneroo raceway on Thursday night. About 40 laps with no problems at all. They got plenty hot enough too, so hot that the fluid started to boil at one time, which meant that the pedal nearly went all the way to the floor. After a cool down lap and 5-10 mins before I went out again, they were cool enough and fine for the rest of the evening.

I am very happy with my purchase!

Rebonds sound pretty good after that sort of test.

They may be required to, however didn't in my case either. They may be having the same trouble we are...

When I bought some genuine Nissan Pit Work Stagea Series II 4WD front brake pads from Japan this was written on the box:

Part Number: AY040-NS129

Fuga [Y50]: VQ25DE, VQ35DE - '04/10-

Skyline [V35]: 350GT - '04/11-

Also stamped into the pad itself: HITACHI HP63H FF

Cost me ¥11,025 (about AU$110 at the time)

Rear: Part number 44060-AR085

Stamped in pad: HITACHI HP62 FF

Cost: ¥8,269 (about AU$81 at the time)

Hope this helps

G`DAY ALL Thank`s for info but we already have it,WHO had new pad`s in when you got your car(complier,yard,other)NOT MANY ???,WHY NOT.I will be getting some pad`s sorted soon so what i would like to know WHO is wanting pad`s,AS I WILL NEED SOME SORT OF IDEA HOW MANY TO HAVE MADE ??????,PLEASE PM ME.cheer`s chuckie

Hi All,

I called Nissan in my area last week and they have the 2006 350z / M45 (non-brembo) pads in stock. $152

Part no: D1060AM80B

I'm planning to take off my pads wander down there and compare in the next few days.

Pete

Hi All,

I called Nissan in my area last week and they have the 2006 350z / M45 (non-brembo) pads in stock. $152

Part no: D1060AM80B

I'm planning to take off my pads wander down there and compare in the next few days.

Pete

This for a series 2? Interesting...

G `DAY ALL,I popped in to fabcar to have a chat with lad`s in work shop,see what Pad`s they use,REBOND`S I was told they have had no luck in finding Pad`s either,which i find strange ???,SO IAM happy with my SOLUTION.SO GOOD LUCK TO THE REST OF YOU IN YOUR QUEST,cheer`s chuckie

Yeah it is.

I was looking at this same page as chook mentioned the other day so I thought

if the 2006 350z is in Aus I may as well give nissan a call and they have the pads to suit.

They look very much the same, although yet to take mine off and compare.

http://catalog.hawkperformance.com/h_produ...any_id=10028147

This for a series 2? Interesting...
The compliancers have to put on new brake pads by law. Surely they must have a local supplier for this task. How could we find out?
G`DAY ALL Thank`s for info but we already have it,WHO had new pad`s in when you got your car(complier,yard,other)NOT MANY ???,WHY NOT.I will be getting some pad`s sorted soon so what i would like to know WHO is wanting pad`s,AS I WILL NEED SOME SORT OF IDEA HOW MANY TO HAVE MADE ??????,PLEASE PM ME.cheer`s chuckie

Dropped my S2 off at the compliance workshop and he had another S2 in silver which was being delayed by about a week to wait on his pad supplier (right here in Adelaide!) to get in more stock of the rear pads... I asked and he said fronts were in stock, and a complete set (front and back) was about $300.

This was for Nissan genuine pads, and he only changes them if either-

- they don't have enough pad material left

and/or

- they aren't genuine Nissan pads

for what it's worth...

Dropped my S2 off at the compliance workshop and he had another S2 in silver which was being delayed by about a week to wait on his pad supplier (right here in Adelaide!) to get in more stock of the rear pads... I asked and he said fronts were in stock, and a complete set (front and back) was about $300.

This was for Nissan genuine pads, and he only changes them if either-

- they don't have enough pad material left

and/or

- they aren't genuine Nissan pads

for what it's worth...

G`DAY LAD`S JUST SEEM THAT YOU ARE ALL HAPPY TO PAY TOP $$$$$ SO GOOD LUCK TO YOU.I WILL NOT BE DOING ANY PAD`S GOOD LUCK IN YOUR HUNTING,cheer`s chuckie

  • 3 weeks later...

Hi all,

I ordered series 2 front pads through nissan last week, only took a few days to get....too easy.

Here's a pic of the part number on the box.

They are the correct shape size width original pad etc....

Retail price is around $220 i think, trade was $183.

Working on these calipers, swapping pads was nice and easy compared to some previous

vehicles i've worked on.

I checked out the pads for the Aussie sold version 350z, a lot smaller, not like the pic in the

hawk catalogue for the US 350z, so if you get those make sure to get the hawk, ebc pad etc.. for the US 350z.

post-38314-1204017607_thumb.jpg

series 1 pads are $150 for the 4 wheels (bendix advance and heavy duty)

bad luck series 2 peeps

:D

What shop was that one?

Also can you throw a part number on here for your fellow S1 owners purdy pwease. :)

Edited by Xmetal
  • 2 months later...

G`Day all just changed front rebond`s after 30,000 km`s,still had a little left but wasn`t going to run to kalgoolie & back with them,which iam pretty happy with,the rebond`s work well as iam not one to hang about :P ,cheer`s chuckie.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Photo of manifold showing gate location? I mean, it's 6Boost, so we probably shouldn't be worrying, but always wroth knowing what the layout is. Plumbed back to atmosphere? Or into the dump?
    • Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
×
×
  • Create New...