Putting R33 Kframe And Cradle Under A 180sx

[mattsr31]

hey all can anyone help me im looking at put a rb25det in my 180sx drift car was told that r33 kframes and rear cradle will bolt straight up to the 180sx.. so just need to no if it is that easy or if not what is needed to be done to what parts to make it all work..

also im looking for a dash pad, bonnet, head lights, front bar & rio, rhs front qurater panle so if any one can help let me no

[STATUS]

they do but the bush spacing is slightly differrent, if one of the bushes is shagged it will not sit square. It is a worth while upgrade geometry wise if thats what your after. i tend to weld plates with the correct offset onto the cradle and do away with the bushes altogether.

[mattsr31]

they do but the bush spacing is slightly differrent, if one of the bushes is shagged it will not sit square. It is a worth while upgrade geometry wise if thats what your after. i tend to weld plates with the correct offset onto the cradle and do away with the bushes altogether.

thanks can you get pics with this done.. or to show what you mean

[mattsr31]

bump