Jump to content
SAU Community

Recommended Posts

  • Replies 94
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

What engine mounts do you use?

Tell me please all your specs!!

Do you have any fotos of your project?

Here is a vid of the car when it had 450whp, and best 1/8 et at this hp level was 7.023 seconds

I have customed engine mounts, but you can buy a set from Mckiney Motor Sports

Presently I have the following mods:

Stock internals RB26

Stock head gasket

Tomie 260 pon cams

Garrett T04Z turbo with 70ar back housing

AEM stand alone with wide band O2

AEM 3.5 bar map sensor

48mm waste gate (cheap ebay)

83lbs seimens injectors

dual 255 walbro pumps

huge 4 inch thick intercooler

stock rb26 intake manifold

nismo GMax twin disc clutch

I am still doing some fine tuning on the car before i run the 606whp tune. I hope to run a 6.7sec.

  • 1 month later...

hey Waldoforce (Congrats).... I had in the past a Supra 2JZ-GTE with similar mods and AEM EMS with 750whp stock internals.

I just want to be sure how many miles did you use your car with stock internals with over 600whp, because I had read too many things about the oil pump failure and I am thinking on almost same mods that you have but Borg Warner S372 intead of your T04Z turbo.

Which oil are you using ?

How many RPMs did you change between gears ?

  • 3 weeks later...
Hi, sorry for the late respond but I just came across this thread.

I am presently running a S14 Silvia with rb26 with stock internals rb26 except for 260 degree cams. To date i have made 606whp, and i am using a garrett T04z turbo.

Do you run 5 speed or 6 speed ?

Very intersting!!

606whp at 26psi with very little mods!!! And with smaller turbo than mine..!

I don't finish my project yet..

I also bought a TOP SECRET SINGLE THROTTLE INTAKE with q45 maf!! :(:):blink:

Are you ok with your Nismo twin plate? How many miles and hard lanuches you did with your twin?

Do you thinking for triple or you are happy with it? Do you suggest me to stay with twin?

I am not sure if my twin can handle the power.

Happy with your skyline gearbox?

What diff you have?

1/8 mile 7 sec means lower than 11sec... something like 10.7!!

UNBELIEVABLE GOOD FOR 450whp!!!

With what tires?

How much you did for the 60foots?

So with 600whp how much I will do?!? :):D :D

And with drag wheels with Mickey Thompson 26-11.5-15 (275-60) ?!? :D :D

SX rulez!! :woot::D

Edited by GreeceS13
Very intersting!!

606whp at 26psi with very little mods!!! And with smaller turbo than mine..!

I don't finish my project yet..

I also bought a TOP SECRET SINGLE THROTTLE INTAKE with q45 maf!! :whistling::D:P

Are you ok with your Nismo twin plate? How many miles and hard lanuches you did with your twin?

Do you thinking for triple or you are happy with it? Do you suggest me to stay with twin?

I am not sure if my twin can handle the power.

Happy with your skyline gearbox?

What diff you have?

1/8 mile 7 sec means lower than 11sec... something like 10.7!!

UNBELIEVABLE GOOD FOR 450whp!!!

With what tires?

How much you did for the 60foots?

So with 600whp how much I will do?!? :D:D:D

And with drag wheels with Mickey Thompson 26-11.5-15 (275-60) ?!? :D:D

SX rulez!! :D:P

any update ? did you tested ?

  • 2 weeks later...
hey Waldoforce (Congrats).... I had in the past a Supra 2JZ-GTE with similar mods and AEM EMS with 750whp stock internals.

I just want to be sure how many miles did you use your car with stock internals with over 600whp, because I had read too many things about the oil pump failure and I am thinking on almost same mods that you have but Borg Warner S372 intead of your T04Z turbo.

Which oil are you using ?

How many RPMs did you change between gears ?

I havent ran the 600 tune much, only 4 1/8th passes to date. Its true that the RBs are plagued with oil pump failures. I am waiting on a ATI damper pulley (600 plus unit) which will help prevent oil pump failure. It also helps not to rev the motor past 8400 rpms

A friend on mines is using a S474 on his Rb25. Its a lil laggy but it hits hard, but he is still tuning.

I am using 4 quarts of 20w50 Castrol oil with 1 bottle oil lucus oil stablizer.

I shift my car at 8100 rpms, and i drop about 2000 rpms between shift.

  • 1 month later...
GreeceS13 ...... did you tested ? any videos ?

I tested the car using a pair of Mickey Thompson 26*10*15 on 10" weld rims. I blew the factory LSD and da car just spung 1 wheel.

I then weld the stock skyline diff and went back to da track. Unfortunitly the clock wasnt working, but i will say this "OH MY GOD" the car leaves the line like a bat out of hell (2 stepping the car and leaving the line with 18psi of boost). I ran a turbo mustang that run 7.3 sec in the 1/8 and beat him convinsingly, and I was at 20psi of boost.

There is a event coming up on the 31st of this month, so I will have some times and hopefully a vid of the 26psi 600whp run.

I tested the car using a pair of Mickey Thompson 26*10*15 on 10" weld rims. I blew the factory LSD and da car just spung 1 wheel.

I then weld the stock skyline diff and went back to da track. Unfortunitly the clock wasnt working, but i will say this "OH MY GOD" the car leaves the line like a bat out of hell (2 stepping the car and leaving the line with 18psi of boost). I ran a turbo mustang that run 7.3 sec in the 1/8 and beat him convinsingly, and I was at 20psi of boost.

There is a event coming up on the 31st of this month, so I will have some times and hopefully a vid of the 26psi 600whp run.

how much weight your car ? I am worry about the 3rd gear problem on your stock 5 speed tranny with 606whp....

I don't finish it yet... :D:bunny:

We have summer in Greece now and it is great time for other enjoyments :(

But I have a drag race to run at 13-14 September and I hope to be ready to race.

So I will inform you about the car..

For the time I don't hear the engine to work yet :laugh::down:

how much weight your car ? I am worry about the 3rd gear problem on your stock 5 speed tranny with 606whp....

I couldn't say for sure what the weight is, but the car is a full body s14 with full interior. Plus my weight is 265 pounds. I would guess about 3300 pounds with me in it.

I have also heard of people breaking 3rd gear with big power on the R33 box in a Skyline. I hope by having sprung hub twin disc clutches (Nismo GMax) will help absorb the SHOCK in 3rd gear. I will see what happens on August 31st, when i really push the car :banana: .

I will keep you all posted.

I couldn't say for sure what the weight is, but the car is a full body s14 with full interior. Plus my weight is 265 pounds. I would guess about 3300 pounds with me in it.

I have also heard of people breaking 3rd gear with big power on the R33 box in a Skyline. I hope by having sprung hub twin disc clutches (Nismo GMax) will help absorb the SHOCK in 3rd gear. I will see what happens on August 31st, when i really push the car ;) .

I will keep you all posted.

Are you running RWD or 4x4 ?

you're OK up to 650whp if is RWD.... my case is worst only 500whp on 4WD.

650whp, well thats good to hear.

Thanks for the heads up.

Oh i just installed my 600plus hp ATI damper pulley, now I am ready for the big races this weekend.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • PRICE  : $1400 LOCATION   : NSW Central Coast FIT  :  All Nissan 350Z type Z33 and Infinity G35 Coupe. See delivery note. Hi, brand new, unused, still in the box.  ($1850.00 is what i paid ) My bad luck !!! I thought my right front  Bilstein was cactus so i bought the ST 's to replace all.  Turns out the right front is fine ( loose mounting after service  by a well known importer of Bilsteins ) So im selling the ST's. They are made by KW ( no intro needed ) . Iam on the Central Coast and im willing to meet up in Sydney metro, within reason and Newcastle.
    • Yep, yeah would need to do the flywheel although the 6 bolt NA clutch can handle a 20de if just wants to replace the stocker.
    • No it's fine. Heat sleeve is a thing. With oil running through it it is unlikely. Engine off heat soak can be a thing though. There is no way that you have a leak through the hose. That has pressure behind it and any small hole will turn into a large one in very short order. It is so much more likely to be leaking from the connection.
    • Really? That's piss weak. I didn't know they hobbled the shitboxen that badly. OK. So probs need to buy a flywheel too. But that's not too bad.
    • Hi all. I already posted some newbie-ish questions here and there but this will be my first "big" post. Last summer I went and fulfilled a kind of childhood wish, because I just thought I needed this experience in my life no matter what. The car I bought is a mildly modded 1995 BCNR33 Vspec. It was repainted to a metallic orange color all around and it had all windows reseated. Not so well done black respray in the trunk and a metallic black in the engine bay. From outside it looks very nice except for a minor paint error on the roof and the rear spats needing new adhesive tape. The inside is pretty clean and no broken plastics, missing or faded buttons. Even the adjustable mirrors and trunk antenna work like a charm. Despite a moderately long list of issues I don't (yet) regret buying this car. Most mechanical problems are just due to age, like worn rubbers here and there. The underside sadly has lots of corrosion, especially to the back. It looks like it either has been driven in the winter for a while or it lived near the saltwater in Japan, the rust is nothing terrible but it'll require to be looked after. Mostly panel gaps and all the mounted components underneath are a bit crusty, but I don't think anywhere has progressed so badly that there's going to be holes. Front right jacking rail is crushed and needs some care so it doesn't develop into a rust crater at some point. Worst part is definitely the strut towers. I thought they looked fine but after taking off the strut bar I noticed that it actually started bulging up on the passenger side. Probably would have passed on the car or negotiated down by some thousand Euros more if I had noticed this before buying, but here we are. Trunk area also has signs that there was a water leak to the interior once but nothing too crazy, I guess lots of Skylines had this at some point. As for the list of (known) issues, I'll try to make this compact. I hope the coloring is self explanatory. Mechanical: -Various busted or soon-to-be busted rubber bushings and ball joints. Will replace ball joints with OEM or better and bushings with polyurethane where possible. -Shaking steering wheel at above 80kph -downshift from 5th to 4th is a bit crunchy unless I rev-match, might just try to renew the shifter assembly, but it's not a priority issue -tailshaft centre bearing could use a replacement, is it worth going 1-piece tailshaft as it doesn't look too fresh all around? Chassis: -underbody corrosion on many spots and in hollow spaces, needs to be treated -corrosion on many bolts, hoses, lines, suspension components, subframes, will be treated when replacing of the bushings is needed as time goes on -strut tower top panels and some of the surrounding panels are rusty, so needs fixing. Will look into doing this with a buddy in the winter, otherwise bite the bullet and pay a professional -driver side door is misaligned to the body and needs to go a slight bit more inwards -both door windows are misaligned and have an airgap where the window meets the door at the B pillar -The Aerocatch latches for the bonnet have locks but no keys, need new keys. -driver side door window is kind of gritty and could use a polish -damaged jacking rails and front frame rails, from people lifting the car the wrong way, might have this fixed by a bodyshop Electrical: -Nismo tachometer is just bouncing and displaying nonsense, supposedly worked fine when the stock ECU was still in the car -An old Greddy boost controller sits on the dash which will be removed as it servers no purpose anymore. -a led segment rpm gauge is on the steering column, will probably also be (re-)moved once the Nismo tacho is working correctly -there was an attempt to make the sound system better by the previous owner but it was just inducing noise all the time, ripped out the amp and filters in the back, no music for now -trunk antenna goes up as long as the radio is on regardless of the mode, I want it to only rise if I choose Radio specifically or per switch -3rd brake light is a bit dimmer than the taillights but everything was converted to LEDs so mabye now it just seems dimmer? -reverse light flickers, have to test if that behavior changes when I fiddle with the gear stick. Hope I can get around changing the switch. -Left side taillight, blinker section has minor water intake and is humid after washing. Other side has a hole in it, probably for that exact reason. I'll probably reseal them entirely and plug the holes. Engine: -minor coolant drips on one or the other hose -rear turbo leaks oil onto the exhaust making the car essentially undriveable due to fire hazard -Oil filter relocation kit has an oil drip at the Dash lines, will probably make a new connection there and tighten real good and pray -throttle body assembly is slightly stuck for the first throttle pedal input after sitting for a while I'm always open to suggestions and advice from more experienced people, I'm sure half of this list is easily dealt with and just requires some time and effort to sort out properly. Once I have some proper pictures of the car I will post some in this thread, I just have to remember to take some more once I get the chance to. Will post updates when I have news on anything, I want to try to keep this thread as kind of a logbook as well. Ultimately my goal for this car is to just enjoy it. An engine rebuild is probably going to happen sometime as well, because it is old after all. It will never be fully new again, I am just not that rich. But I want it to look good, work well and not rot away while I drive it. I'm probably gonna spend a lot of money on this journey, hopefully not an unreasonable amount.
×
×
  • Create New...