S13 Rb26 Help For 600whp Project!

[GreeceS13]

waldoforce good luck and ofcourse we are waiting your results!!

Also do you have any foto of your car?

Video of your runs?

[95GTR600]

650whp, well thats good to hear.

Thanks for the heads up.

Oh i just installed my 600plus hp ATI damper pulley, now I am ready for the big races this weekend.

good luck !

[waldoforce]

good luck !

Up date after the races

The car having some boost isues, could not get over 20psi. I think its the cheap Ebay waste gate, but on 20psi I was able to run 7.1sec in the 1/8. Best 60ft the car had for the day was 1.50 sec. Then "Bang", i broke the outer CV joint in the rear. The car is HOOKING!!!!

So i now have to resolve my boost issues and change the CV joint. I will look into some performance ones.

[den001]

Up date after the races

The car having some boost isues, could not get over 20psi. I think its the cheap Ebay waste gate, but on 20psi I was able to run 7.1sec in the 1/8. Best 60ft the car had for the day was 1.50 sec. Then "Bang", i broke the outer CV joint in the rear. The car is HOOKING!!!!

So i now have to resolve my boost issues and change the CV joint. I will look into some performance ones.

what you can do is get a gtr rear end, strip all the arms, diff, cv's and bolt that to the existing cradle in your car now.... you will need a custom tailshaft

the diffs are mechanical, also are a 4.11 ratio, the cv's are a shitload thicker and stronger, this is what i have in my rb26 powered s15, yet to test but ive had the cradles side by side and the difference in everything you will swap over is heaps better that the s14 stuff...

[GreeceS13]

waldoforce You don't have gtr diff+axles+hubs? Was a miracle that you run with gts-t or silvia rear end!!!

I have gtr diff,axles,hubs and the center shaft!!

You need hubs because gtr axles are thicker!!

You run only 1/8? Not 1/4?

Any issues with gearbox?

Your twin plate work good?

Fotos? Videos?

1.5 is very good

I have Mickey Thompson 26x11.5x15 in 8" Weld Drag lites wheels!

What rear shocks you have? Do you have any aftermarket links on the rear? Bushing?

Do you have skinny front? I have 18" front for the time with 8piston D2 brakes I don't know what to put there..

[waldoforce]

waldoforce You don't have gtr diff+axles+hubs? Was a miracle that you run with gts-t or silvia rear end!!!

I have gtr diff,axles,hubs and the center shaft!!

You need hubs because gtr axles are thicker!!

You run only 1/8? Not 1/4?

Any issues with gearbox?

Your twin plate work good?

Fotos? Videos?

1.5 is very good

I have Mickey Thompson 26x11.5x15 in 8" Weld Drag lites wheels!

What rear shocks you have? Do you have any aftermarket links on the rear? Bushing?

Do you have skinny front? I have 18" front for the time with 8piston D2 brakes I don't know what to put there..

enjoy! Oh take some time and look the time slip in the vid. Thanks

I have R33 GTST diff, axles, the whole rear sub frame.

I will look into the GTR axles and hub, thanks.

No issues with the gearbox as yet and the twin disk clutch is still holding.

The red 180sx in the vid is using almost the same tires that you have (26*11.5*16 ET Street drag) , but he has them on the twin turboZX 8.5" rims. I am using MT 26*10*15 on 10" weld rims.

In the rear I am using stock S14 shocks, with lowered skyline springs.

Yes I do have adjustable aftermarket links in the rear, with polyurethene bushing in the spindles. I also have a set of aluminum rear subframe spacers

No i dont have skinnies up front. I have 18"s awell with the factory skyline brakes and rotors all round. You will be fine with them. I have seen many 10sec cars without skinnies up front.

[waldoforce]

what you can do is get a gtr rear end, strip all the arms, diff, cv's and bolt that to the existing cradle in your car now.... you will need a custom tailshaft

the diffs are mechanical, also are a 4.11 ratio, the cv's are a shitload thicker and stronger, this is what i have in my rb26 powered s15, yet to test but ive had the cradles side by side and the difference in everything you will swap over is heaps better that the s14 stuff...

Thanks, I will definitly look into this. I need something that can handle my hard launches.

Thanks again

[GreeceS13]

1.506!!! Very very good

But 7.1 isn't 600whp s14 must do something like 6.5!! Try more when you fix your boost problems

My tires are better than your friend's... I have 15" so quite more sidewall!! My tires is et street drag too.

Don't forget that your need also gtr hubs.

What times did your friend and what horsepower he has?

I will put also a line lock for easy burnouts!!

My target is to do very low 10sec in the 1/4 drag races!!

We have a race at 13 September and I hope to have my car ready to race

[waldoforce]

1.506!!! Very very good

But 7.1 isn't 600whp s14 must do something like 6.5!! Try more when you fix your boost problems

My tires are better than your friend's... I have 15" so quite more sidewall!! My tires is et street drag too.

Don't forget that your need also gtr hubs.

What times did your friend and what horsepower he has?

I will put also a line lock for easy burnouts!!

My target is to do very low 10sec in the 1/4 drag races!!

We have a race at 13 September and I hope to have my car ready to race

Thanks for the heads up on the GTR hubs.

My friend makes about 480whp and his best time to date is 7.1sec in the 1/8th.

You are right, at 600whp I should be able to do 6.5-6.7sec, but I am not the best of drivers . We have an event at the end of this month. I will have the car ready for that.

[95GTR600]

any update ?

[UR33DY]

yeah any update??

[GreeceS13]

The car finished!

We had a problem with the wastegate.. the valve was all the time semi-open and we didn't undestand it.

With stock ecu and mafs was a pain. The car was very unfriendly and difficult to drive but maybe the problem was the semi-open wastegate.

We did 11.7 with 1.3bar only and the clutch slipping a lot!! But I wasn't sure that it was slipping...! Ah and 1,565 60foots!!! And without launch control!!!

So we take the desicion to put an Apexi Power FC D-Jetro! And we check the wastegate if was good and we saw the problem.

So when we put the power fc the car was like a stock car!! Very friendly!! Still with base stock map(ofcourse only for vacuum driving)!!! I was so happy when I put the power fc but as I said maybe the problem was the wastegate. We burn two z32 mafs while we tried to finish the car with stock ecu so I am very happy now with the maps and I have cool engine bay!!

We was on the dyno.. at 16psi 540flywheel hp with 8500rpm limit and the clutch slipping a lot!!! The afr was 11.0!

So we leave it there... with 2.2sec 60foots and with 16psi boost and with this bad clutch the car did 12.5 in my second drag race! I go for race only for fun as I had slipping clutch.

I put also Splitfires just to be sure.. Gizzmo launch control system with tach recall shift light.. Denso Iridium IK24 plugs..

When I will buy an overhaul kit for my OsGiken Twin plate I will go again on the dyno. Maybe with IQ27 if I will have money

Also I use 100octane pump fuel. But I am thinking to add 1/5 Vp Import for my high boost runs. How much high? I don't know yet

Edited November 9, 2008 by GreeceS13

[waldoforce]

any update ?

Thanks everyone for the info on the GTR axles and hub, they work like a dream. I am now hitting 1.4s 60 foots, best to date is 1.47sec. Also, I have been able to get the boost up. I am pleagued with a faulty waste gate, but was able run 26psi. The car did 7.003sec in the 1/8 on a test and tune night with minimal track prep. We have an event today. I will keep you all updated.

[UR33DY]

Hey waldoforce,

can you post up some pics of your s14, are you also able to post some spec's on turbo, cams, pistons?

cheers

dan

[waldoforce]

Hey waldoforce,

can you post up some pics of your s14, are you also able to post some spec's on turbo, cams, pistons?

cheers

dan

The turbo is a garrett T04z with a 70ar back housing. The motor has factory pistons, and I am using Tomie pon cams 260 degree.