Jump to content
SAU Community

Wrecking Complete 1995 R33 S1 Gtst Sydney

Xr33
 Share

Recommended Posts

Xr33 Contributor

Xr33

Posted
Posted (edited)

Hi everyone Wrecking COMPLETE r33 series 1 GTST 1995 71,XXXkm in NSW

I will supply a receipt will every purchase made. I will also include the VIN number.

I cant keep up with all the messages so call me on 0424333012. I got a whole car so I probably got what you need.

SOME prices are negotable

Engine & Gear box (5 speed manual) – Excellent condition engine has never been modified or ran more than factory boost. Runs and sound like a dream. Engine and gearbox are one pieces as pulled out of car. Will separate if price is ok $3500ono

NOTE: GEARBOX SOLD SOLD SOLD(COMPETE WITH MANUAL SCONVERSION PARTS)

EXCELLENT MOTOR COMPLETE $1700onomotor SOLD SOLD SOLD

Power steering pump $50 SOLD

Alternator $50 SOLD

Air compressor.$50 SOLD

Tail shaft $100 SOLD

Sunroof complete (including roof liner) $500

Brakes Rear rotors $400 SOLD

Brake booster $100 (excellent condition)

Front rotors/hubs $100(excellent condition)

Doors(both) $300 (both) passenger side has light ding in it. Easy repair

3" Exhaust with cat $200 SOLD

REAR CUT(long) –complete $1300 or

Rear cradle/diff $400

Rear wing $150

Lights $150

Boot lid $250

Bar $150

FRONT CUT –complete(dressed) $1500 or

Front bar firerglass 400r BRAND NEW $200

Lights $300

Bonnet $200

Gaurds/fenders (both)$150

Front suspension $300

Radiator /condenser $150

Crossmember $100

Steering rack $150

Steering / wheel colum with keys and DOOR locks $250

Complete interior

Cluster $100 SOLD

Seats $200 SOLD

Plastics $ASK

Dash $150

Electronic areil $50

4 stock wheels $150

Wiring looms/ ecu $150

Many other parts

Edited by Xr33
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Ticking Sound On Idle - Rb25

      By MBS206 · Posted

      Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • WARLORD
      injectors top feed for sale

      By WARLORD · Posted

      Deatschwerks 1800cc sold
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • myrbgivesmeheadaches
      Ticking Sound On Idle - Rb25

      By myrbgivesmeheadaches · Posted

      Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
×
×
  • Create New...