Jump to content
SAU Community

Recommended Posts

Look, we don't want to troll or dash any hopes out there, but let's face it, there are a ton of unanswered questions about the R35 out there that we just don't know yet. STILL, it doesn't hurt to guess any of these answers, right? We (me, Marc, or Jon) hardly read this section of the forum, because it's all so speculative, but this is our opinion here that it's just not worth even thinking about the R35 at least for another year or so, for the following reasons.

Here are two (what we believe to be) facts people should keep in mind when thinking about doing compliance for this car (remember, we have 19 models on our compliance list now, largest in Victoria, we know what we're talking about at least a bit):

#1. The new Nissan R35 GTR has now been released in Japan. Unfortunately it will be 18 months (from October 24 2007) before it is eligible for import under the RAWS scheme unless Nissan provide a letter that they will not be importing it to Australia (unlikely I think). The word is that Nissan are trying for Full Volume approval for some time late 2008. (This 'word' comes from an engineer we know)

Bringing in a Vehicle for market evaluation is a big risk at this stage as it may never get to the stage of being eligible for compliance. (I.E. there has to be a period of 18 months where Nissan doesn't bring it in themselves, or else it will never be eligible)

#2. On top of that the new sevs emissions laws are making it so tight that no new raws vehicles to date have passed an emission test. This could be how the government is trying to squeeze out importers.

That's about it, really....we'd love to be wrong about this stuff, so please start the flame war now. I realize that everyone's quite excited about this car....but if you're bringing in test cars, I'd recommend having a backup plan or at least thinking about the issues I've outlined above.

cheers!

david @ carizma

Link to comment
https://www.sau.com.au/forums/topic/202581-unanswered-questions-about-the-r35/
Share on other sites

i dont' know much about this emission thing, but if you stick 20 cat on the car all the way through the exhaust, that would lower the emission wouldn't it? Why don't they just do that to test the emission and then swap it over once its all done?

sorry, you lost me on that post.

Why do you think this car isn't for dealers? We've had dealers asking about bringing in evaluation vehicles already, and we told them pretty much what I outlined in the above post.

I understand what you're saying about 'waiting for others', and that definitely seems like the smart way to do things now, but I don't know how you can say it 'will not be hard', because it might be IMPOSSIBLE, which is more than hard.

As I said above, Nissan has 18 months from release in Japan to bring it in themselves. Until that 18 months passes OR Nissan writes a letter to DOTARS giving up their import rights, no one can bring them in under SEVS.

Our dealership wouldn't bring in a car in this range, simply because we could buy about 10 R34's for this price and turn them over much quicker. It becomes a simple calculation of your rate of return to see if it's worthwhile. For us to add a new vehicle to our schedule, we'd have to do about 20 vehicles per year to make it worthwhile for compliance, granted with a car like the R35 it'd drop, but still, we're already maxing out our plates so why bother?

The bigger issues that are brewing have not even been covered yet as to if approval will be granted under new vehicles so for the first workshop that tries let see what happens as a few people thought it would be simple and jumped in with out looking into everything.

The R35 GTR will not be hard to get approved if you know what you are doing from a signatory point of view the issues are big picture stuff associated with Nissan, DOTARS, Evidence and time frame.

This isn't for car dealers who want to make a quick buck territory it is for people who do one thing and one thing only.

Hi David, thanks for your post maybe you can help us clear up what is going on in the industry surrounding the R35 GTR.

First off - not disagreeing with you but can you please point me to the relevant legislation which says there is an 18 month gap between the release of the vehicle and the eligibility for import into Australia. I'm not saying it isn't there or arguing with you I just want to know more of the background and haven't found that yet. (I'm currently re-reading Circular 0-2-12-1)

That being said, the R35 GTR is already on the eligible vehicles list for new vehicles only; are you referring to used vehicles only? Or both? As you are in the trade, can you explain what this listing in the SEVS list means with regards to importing a brand new car?

Lastly, since we know RAWS already have cars in the country what are the steps they would be going through right now with these cars to gather evidence? I assume collecting emissions data and safety data, anything else?

Again thanks for posting - just trying to learn more about the industry in general.

off the top of my head, you'll need to supply structural integrity test results (side intrusion, frontal impact etc), as well as provide evidence that it complies to the new emissions regulations (keeping in mind japan's still a bit behind on this area, hence their cars being delivered with higher power outputs than overseas).

gathering collision data for an R35 will be fun. not many written off cars you can use a good side of to collect data, and I'd assume Nissan's not too keen on supplying the data either.

yes it's correct. to import used cars via SEVS in low volume they have to have been offered OS for 18months before nissan started selling them here in full volume (this is what happed with S15s, 18months on sale OS before nissan started full volume sales). at the moment new cars are eligible under SEVS but no-one has got compliance yet, but it should be possible. used cars is wait and see what happens. no-one can accurately predict that at this point.

off the top of my head, you'll need to supply structural integrity test results (side intrusion, frontal impact etc), as well as provide evidence that it complies to the new emissions regulations (keeping in mind japan's still a bit behind on this area, hence their cars being delivered with higher power outputs than overseas).

gathering collision data for an R35 will be fun. not many written off cars you can use a good side of to collect data, and I'd assume Nissan's not too keen on supplying the data either.

The car has been built with emissions in mind and meets the Japanese U-LEV (Ultra Low Emissions Vehicle) standard meaning it has emissions 75% lower than those required by the current emissions criteria in Japan. There is also some sources saying it meets Californian ULEV standards as well but I don't blindly trust those sources.

Wasn't sure how to cut and paste multiple posts, so I'll try to simplify what might be some misunderstandings below.

Basically, it makes sense to look at Nissan's options, which leads us to our (compliance workshop's) options.

option #1: Nissan brings in more than 100 R35's to Australia (within 18 months of release).

result for us: sorry, only Nissan can bring it in.

option #2: Nissan declares they will bring it in under SEVS (like Mitsubishi did with EVO)

result for us: hooray, let's all get compliance and import R35's.

option #3: Nissan can say, "we're not bringing it in" (which they probably won't do)

result for us: wow, thanks for the heads up Nissan, that was kind, now let's bring in R35's.

option #4: Nissan doesn't bring them in for 18 months, but brings them in later possibly

result for us: we can bring in the cars built during those date ranges (same as S15)

don't think there's an option #5

Right, but a RAW can only do used cars, and emissions are harder on used cars than new cars. I don't have the numbers in front of me, so can someone check the SEVS emission requirements (from 2006/7?) versus Japan ULEV?

k, going home now....Jon might be replying from now on for today....

-david

The car has been built with emissions in mind and meets the Japanese U-LEV (Ultra Low Emissions Vehicle) standard meaning it has emissions 75% lower than those required by the current emissions criteria in Japan. There is also some sources saying it meets Californian ULEV standards as well but I don't blindly trust those sources.
Right, but a RAW can only do used cars, and emissions are harder on used cars than new cars. I don't have the numbers in front of me, so can someone check the SEVS emission requirements (from 2006/7?) versus Japan ULEV?

k, going home now....Jon might be replying from now on for today....

-david

Cheers for that. That was what I was missing. RAWS can only do used cars so we are back to 18 months of waiting to see what Nissan does.

lol my bad, jsut checked the SEVS listing and F50's are listed as used cars, its Y50 Fuga's that are new. d'oh.

So being listed as a New Import, does that mean that whoever imports the car has to sell it as their own product? so for example the Carizma GT-R? I'm assuming Nissan would then sue the pants off anyone selling it as their own product?

Yeah also they came out 2004 too I believe, I think the only way we can do a new car is if the major manufacture is not in Australia and the car meets all the criteria.

lol my bad, jsut checked the SEVS listing and F50's are listed as used cars, its Y50 Fuga's that are new. d'oh.

So being listed as a New Import, does that mean that whoever imports the car has to sell it as their own product? so for example the Carizma GT-R? I'm assuming Nissan would then sue the pants off anyone selling it as their own product?

I just wish Nissan australia would start selling ALL Skylines here again like the old R31 days.What a great shame they stopped selling skylines here right when the really good ones were just being released

It would be ok if they sold them at a reasonable price though...

I just wish Nissan australia would start selling ALL Skylines here again like the old R31 days.What a great shame they stopped selling skylines here right when the really good ones were just being released
Don't blame Nissan, blame the damn govt.

the same damn government that's got one of the best import laws for a country with its own automotive manufacturing industry?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Gotta admit, I love the 20b Cosmo.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
    • Every one has seemed to of have missed . . . . . . . The Mazda Cosmo . . . . . . what a MACHINE ! !
×
×
  • Create New...