Jump to content
SAU Community

Recommended Posts

Look, we don't want to troll or dash any hopes out there, but let's face it, there are a ton of unanswered questions about the R35 out there that we just don't know yet. STILL, it doesn't hurt to guess any of these answers, right? We (me, Marc, or Jon) hardly read this section of the forum, because it's all so speculative, but this is our opinion here that it's just not worth even thinking about the R35 at least for another year or so, for the following reasons.

Here are two (what we believe to be) facts people should keep in mind when thinking about doing compliance for this car (remember, we have 19 models on our compliance list now, largest in Victoria, we know what we're talking about at least a bit):

#1. The new Nissan R35 GTR has now been released in Japan. Unfortunately it will be 18 months (from October 24 2007) before it is eligible for import under the RAWS scheme unless Nissan provide a letter that they will not be importing it to Australia (unlikely I think). The word is that Nissan are trying for Full Volume approval for some time late 2008. (This 'word' comes from an engineer we know)

Bringing in a Vehicle for market evaluation is a big risk at this stage as it may never get to the stage of being eligible for compliance. (I.E. there has to be a period of 18 months where Nissan doesn't bring it in themselves, or else it will never be eligible)

#2. On top of that the new sevs emissions laws are making it so tight that no new raws vehicles to date have passed an emission test. This could be how the government is trying to squeeze out importers.

That's about it, really....we'd love to be wrong about this stuff, so please start the flame war now. I realize that everyone's quite excited about this car....but if you're bringing in test cars, I'd recommend having a backup plan or at least thinking about the issues I've outlined above.

cheers!

david @ carizma

Link to comment
https://www.sau.com.au/forums/topic/202581-unanswered-questions-about-the-r35/
Share on other sites

i dont' know much about this emission thing, but if you stick 20 cat on the car all the way through the exhaust, that would lower the emission wouldn't it? Why don't they just do that to test the emission and then swap it over once its all done?

sorry, you lost me on that post.

Why do you think this car isn't for dealers? We've had dealers asking about bringing in evaluation vehicles already, and we told them pretty much what I outlined in the above post.

I understand what you're saying about 'waiting for others', and that definitely seems like the smart way to do things now, but I don't know how you can say it 'will not be hard', because it might be IMPOSSIBLE, which is more than hard.

As I said above, Nissan has 18 months from release in Japan to bring it in themselves. Until that 18 months passes OR Nissan writes a letter to DOTARS giving up their import rights, no one can bring them in under SEVS.

Our dealership wouldn't bring in a car in this range, simply because we could buy about 10 R34's for this price and turn them over much quicker. It becomes a simple calculation of your rate of return to see if it's worthwhile. For us to add a new vehicle to our schedule, we'd have to do about 20 vehicles per year to make it worthwhile for compliance, granted with a car like the R35 it'd drop, but still, we're already maxing out our plates so why bother?

The bigger issues that are brewing have not even been covered yet as to if approval will be granted under new vehicles so for the first workshop that tries let see what happens as a few people thought it would be simple and jumped in with out looking into everything.

The R35 GTR will not be hard to get approved if you know what you are doing from a signatory point of view the issues are big picture stuff associated with Nissan, DOTARS, Evidence and time frame.

This isn't for car dealers who want to make a quick buck territory it is for people who do one thing and one thing only.

Hi David, thanks for your post maybe you can help us clear up what is going on in the industry surrounding the R35 GTR.

First off - not disagreeing with you but can you please point me to the relevant legislation which says there is an 18 month gap between the release of the vehicle and the eligibility for import into Australia. I'm not saying it isn't there or arguing with you I just want to know more of the background and haven't found that yet. (I'm currently re-reading Circular 0-2-12-1)

That being said, the R35 GTR is already on the eligible vehicles list for new vehicles only; are you referring to used vehicles only? Or both? As you are in the trade, can you explain what this listing in the SEVS list means with regards to importing a brand new car?

Lastly, since we know RAWS already have cars in the country what are the steps they would be going through right now with these cars to gather evidence? I assume collecting emissions data and safety data, anything else?

Again thanks for posting - just trying to learn more about the industry in general.

off the top of my head, you'll need to supply structural integrity test results (side intrusion, frontal impact etc), as well as provide evidence that it complies to the new emissions regulations (keeping in mind japan's still a bit behind on this area, hence their cars being delivered with higher power outputs than overseas).

gathering collision data for an R35 will be fun. not many written off cars you can use a good side of to collect data, and I'd assume Nissan's not too keen on supplying the data either.

yes it's correct. to import used cars via SEVS in low volume they have to have been offered OS for 18months before nissan started selling them here in full volume (this is what happed with S15s, 18months on sale OS before nissan started full volume sales). at the moment new cars are eligible under SEVS but no-one has got compliance yet, but it should be possible. used cars is wait and see what happens. no-one can accurately predict that at this point.

off the top of my head, you'll need to supply structural integrity test results (side intrusion, frontal impact etc), as well as provide evidence that it complies to the new emissions regulations (keeping in mind japan's still a bit behind on this area, hence their cars being delivered with higher power outputs than overseas).

gathering collision data for an R35 will be fun. not many written off cars you can use a good side of to collect data, and I'd assume Nissan's not too keen on supplying the data either.

The car has been built with emissions in mind and meets the Japanese U-LEV (Ultra Low Emissions Vehicle) standard meaning it has emissions 75% lower than those required by the current emissions criteria in Japan. There is also some sources saying it meets Californian ULEV standards as well but I don't blindly trust those sources.

Wasn't sure how to cut and paste multiple posts, so I'll try to simplify what might be some misunderstandings below.

Basically, it makes sense to look at Nissan's options, which leads us to our (compliance workshop's) options.

option #1: Nissan brings in more than 100 R35's to Australia (within 18 months of release).

result for us: sorry, only Nissan can bring it in.

option #2: Nissan declares they will bring it in under SEVS (like Mitsubishi did with EVO)

result for us: hooray, let's all get compliance and import R35's.

option #3: Nissan can say, "we're not bringing it in" (which they probably won't do)

result for us: wow, thanks for the heads up Nissan, that was kind, now let's bring in R35's.

option #4: Nissan doesn't bring them in for 18 months, but brings them in later possibly

result for us: we can bring in the cars built during those date ranges (same as S15)

don't think there's an option #5

Right, but a RAW can only do used cars, and emissions are harder on used cars than new cars. I don't have the numbers in front of me, so can someone check the SEVS emission requirements (from 2006/7?) versus Japan ULEV?

k, going home now....Jon might be replying from now on for today....

-david

The car has been built with emissions in mind and meets the Japanese U-LEV (Ultra Low Emissions Vehicle) standard meaning it has emissions 75% lower than those required by the current emissions criteria in Japan. There is also some sources saying it meets Californian ULEV standards as well but I don't blindly trust those sources.
Right, but a RAW can only do used cars, and emissions are harder on used cars than new cars. I don't have the numbers in front of me, so can someone check the SEVS emission requirements (from 2006/7?) versus Japan ULEV?

k, going home now....Jon might be replying from now on for today....

-david

Cheers for that. That was what I was missing. RAWS can only do used cars so we are back to 18 months of waiting to see what Nissan does.

lol my bad, jsut checked the SEVS listing and F50's are listed as used cars, its Y50 Fuga's that are new. d'oh.

So being listed as a New Import, does that mean that whoever imports the car has to sell it as their own product? so for example the Carizma GT-R? I'm assuming Nissan would then sue the pants off anyone selling it as their own product?

Yeah also they came out 2004 too I believe, I think the only way we can do a new car is if the major manufacture is not in Australia and the car meets all the criteria.

lol my bad, jsut checked the SEVS listing and F50's are listed as used cars, its Y50 Fuga's that are new. d'oh.

So being listed as a New Import, does that mean that whoever imports the car has to sell it as their own product? so for example the Carizma GT-R? I'm assuming Nissan would then sue the pants off anyone selling it as their own product?

I just wish Nissan australia would start selling ALL Skylines here again like the old R31 days.What a great shame they stopped selling skylines here right when the really good ones were just being released

It would be ok if they sold them at a reasonable price though...

I just wish Nissan australia would start selling ALL Skylines here again like the old R31 days.What a great shame they stopped selling skylines here right when the really good ones were just being released
Don't blame Nissan, blame the damn govt.

the same damn government that's got one of the best import laws for a country with its own automotive manufacturing industry?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That is the serial number of your block
    • best advice yet.  so between the elite and the nexus... much of a difference?  cost is damn near identical (only $170 difference).  thank you!!!
    • Hi everyone, I've found some free time to write up my "build thread" which is 10% 'build' and 90% fixing problems of a skyline that has endured a lifetime of abuse. I will start with the backstory & get everyone up to speed. Ever since I was just a teenager in high school I have had a spot in my heart for the shape of an R32 rivaled only by the look of an S13, my mates & I all having overly ambitious dreams as one does about having the sickest car in the school carpark. Unfortunately I started my journey of cars down the path of the Silvia and after spending years of putting up with the underwhelming SR20 life I dipped my toes into the 1J Toyota pool for a small moment until my true compass brought me back to that incomplete dream of an R32. At this point the trawl through marketplace, gumtree, carsales etc. starts looking Aus wide for an affordable example in the current economy which was extremely barebones compared to the good old days of sub 10k cars everywhere. Out of the handful of cars in the budget at the time I settled on a 1992 R32 GTS-T that was located in Adelaide. It had caught my eyes as it was similar price to the others on the east coast and had been RB25DET NEO converted and an open door respray in a custom colour based off TH1. It was also a stand out to me because it already had some NSW registration left which saved me the hassle of getting it on the road in my state. As for mods I was told it was pretty stock other than the motor swap, a nistune to run it, and an unknown fuel pump. My first mistake was trusting the seller blindly that the car was in good condition in all aspects and decided to purchase the car unseen other than some walkaround videos & pictures as the flights down there were very expensive at the time. The price of getting it transported to my door from Adelaide from Sydney was surprisingly cheaper than the flights at the time. I was told the few issues it apparently had was only 1 speaker not working, some cracked or missing trims, and it had been rear ended at some point but had been all professionally repaired (this is all foreshadowing at this point). I paid for the car, and then booked the interstate transport. Now at this point save your criticism as I already know how stupid I sound in hindsight, this was a major lapse of judgement and I accept the problems that followed. I spent the next 2 weeks in a crazed excitement knowing I am finally the owner of an R32 & that it was on its way. I started preparing as when negotiating with the seller I opted out of the Lenso wheels as they aren't really my style & I wanted a set of genuine wheels, and the bucket seats in the car as I am 6ft5 and not the skinniest guy so I had my predictions that I wouldn't fit in them anyway. Due to this the car was put on a set of R33 stockies and some average condition R33 seats that he had laying around. While I waited for the car to arrive I went and picked up a pair of R32 seats and some R32 GTR wheels to fit nicely on it once it had arrived. Being the first time I had done anything like this or had a car transported interstate I had no clue how the logistics of it were, I chose my work as the delivery address assuming it would arrive at some point in the middle of the day. You can imagine my surprise when I wake up to a call from the truck at 5:30am telling me his about 20 minutes away. When I tell you that was the fastest drive to work I have ever done, I managed to catch up to the truck before it even got there. Spent the hours before work taking in the car and living my first experience with one, I had never even been inside one so I spent some time getting familiar with the interior before doing the seat swap. Here is my first proper photo of it as the sun rose in the background. I also noticed it had the switch for the electronic front lip which was a pleasant surprised but sadly upon looking it didn't actually have the lip or the motors or even any wiring behind the switch. As I swapped the seats, the extremely questionable history of the car started to show itself starting with some really dodgy seatbelt buckles that had been extended for some reason with horrendous welds. This was followed by me noticing the drivers side front was quite bent up to which the owner then decided to let me know it had been hit in the front at the same time as the rear end. It also had a pretty leaky power steering rack and the pump was screaming for its life. By now I was a little on edge but I had to get to work for the day, I sent the car down to my mechanic to get the fluids changed and a general check over as I started to question what I had got myself into. I packed the GTR wheels into the car to get put on while it was there as I ran out of time which was a struggle because the handle to release the fuel door/boot was non-existent and just had the end of the cable tied to a bolt. It wasn't much of a surprise when I got a call saying that it looked like the fluids hadn't been done in quite some time. Although that didn't come as a shock, it did catch me off guard when I was told he couldn't open the boot which had the wheels in which I just had open not long before. Mission #1 was to squeeze through the back panel and open the boot from the latch while loaded with a set of wheels which to my amazement he pulled off after a bit of a struggle to reveal there was nothing holding the cable mechanism in place where it sits at the fuel cap. After that dilemma was solved the mechanic did an inspection over the car while on the hoist with nothing too interesting being found other than the expected crushed frame rails. It seems to have had some bilstein shocks installed at some point and judging by the AWD sump that has been sealed up I suspect the NEO is out of a stagea. By the time I got the car back and was ready to have my first drive home in it I was still excited but now quite anxious with the car already. First stop was to the servo to get a nice fresh tank of fuel as I had no idea how long it may have been sitting around for before I bought it. It sat quite nicely on the GTR stockies I must say. Now my drive home from work is short only being a 15-20 minute commute so the chances of anything going wrong is quite small right? WRONG. As I go over a speed bump only 100m from home I start to smell the dreaded smell of electrical burning and my lights drop out and shortly after the car dies. I am in extreme panic at this point thinking the car is going to burn down on its first drive before I have even had a chance to insure it. I move to the bonnet as quick as I can and lift it up, and as I go to grab the bonnet prop my brain is in such a frenzy that it takes me a second to realise my hand is being burnt to a crisp. This is where I notice that there is no plastic clip for the bonnet stay and when I have gone over the speed bump it has knocked the stay onto the positive terminal of the battery welding itself there. Levering it off with a nearby stick I sat there for a few minutes making sure nothing was going to burn down while waiting for a mate to come jump start me. My main stress was that I could've absolutely cooked the ECU or any other electrics. I was relieved when the car started fine with jumper leads on it but it would die as soon as the headlights were turned on so I carefully limped it home with no lights and decided it was a tomorrow task. You can see here where the stand sat on the positive terminal. Thankfully with a new battery the car behaved and seemed healthy. It was pretty smooth sailing for a little while getting to enjoy dailying the car. Interior wise it was pretty much as the seller described except for the the lack of working speakers, the digital controls had no power, and the headunit would randomly turn off & on. I installed a quick release I had laying around from an old car to help with getting in & out of the car and a nice momo wheel. I bought some oem side skirts to match the rear pods that were on the car already, who said a skyline can't be a practical parts mover. Test fit looks good! Found a good deal on a GTR wing & boot that I couldn't turn down. At this point the skyline was being too good to me and had to throw the spanner in the works again. First incident was as I was coming off the motorway and heard a bang and an awful grinding noise. As I pull over down a side street to investigate I notice my whole exhaust has basically fallen off and is dragging on the ground. After waiting around to let it cool to the touch I managed to get it back on its hangers. Thinking it was a weird 1-off instance I didn't think much of it until it happened to me again a few days later to which I see this time the middle hanger has snapped in half and the rear hangers have snapped at the welds. I manage to get the car in to a shop to get the hangers welded and while there I notice that my intercooler has broken its brackets and was being held up only by the piping. Quickly got that sorted and got some thicker brackets out of steel plate to support it all. Just when you thought at this point the car might give me a break, I fill the car up on my way home from the fabricators shop and after I pay I walk back to a good portion of my liquid gold on the floor. I just shrug it off at this point in exhaustion and call it a job for another day. The car had other plans for me though as the next morning on my commute to work, I am halfway there when I notice I am struggling to shift gears. I get lucky with a run of no red lights to work and find some time on my lunch break to investigate the problem. The slave wasn't leaking and the master still had fluid so I was left confused until I contorted myself under the dash and noticed the whole pedal moving loosely side to side when pushed in. Upon pulling it out of the car I found it to be multiple snapped spot welds on the clutch pedal bracket and the actual face of the pedal that sits against the firewall had snapped in half. I jerry rigged it with nuts & bolts at the spot welds but I will need to come back to this in the future and replace with one of the strengthened nismo brackets available. I then got to enjoy the car for another 2 months of cruising and dailying it, peep the obnoxious fireballs it would shoot every shift on the dodgy tune that was on there. On a sunday drive in that period of working car, I was on my way home on the motorway when I heard a slapping noise on my front left to which I pulled over to find my indicator had ejected itself from the car. Nothing a bit of tape can fix lol. I then bought some smoked indicators but after I realised I didn't like the look I found some damaged series 1 indicators. I repaired the tabs with some cut up cards and they looked good to me. My next venture was the hunt for some wheels, I test fit my mates Work Equip Spinning that were tiny 15" and I wasn't sold on the small wheel look. I ended up finding a killer deal on some Rays Volk Racing Group C in 17x8.5 & 17x9 that had been rebuilt many years ago and not ran on a car. I am still yet to get these on the car as they require some specific adapters and shank style lug nuts but I think they will look awesome. At this point my 2 months of reliability had ran out and on a cruise with some friends I suddenly lost the ability to shift gears again and thankfully could get it home by taking main roads and not having to stop. This time my master cylinder was bone dry and the culprit was the clutch slave that had decided to let go. It was a quick and fairly easy fix, but in my luck bad things always come in waves. Only a few weeks later I am on my way home from World Time Attack when the car completely shuts off while coasting down a hill, I try crank it while I still have momentum but no luck. Thinking I might have killed the fuel pump from running it low or maybe killed a CAS because the symptoms seemed to line up somewhat, I opt to get the car towed to a workshop to get fixed up on the Monday. When it gets there they get stuck into diagnosis and the CAS wasn't sending a signal to the ECU, and the fuel pump was also dead so it was comical for a small moment there. They replace the dead fuel pump when one of them notices some smoke coming from the passenger kick panel. Boy oh boy this is where it gets very bad and very expensive. I am not sure who wired the car when the NEO swap was done originally but I hope they never attempt auto electrical again as I am lucky that this handywork only managed to short and kill the ecu and engine loom and not do more damage. This is the point where you could say the 'build' started but not by choice. After some deliberation with my bank account I opted for a Haltech Elite 2500, RB terminated loom, and WB1. While I wish I stopped there and did the minimum of get the car running and leave it at that, I slipped into the rabbithole and decided I wanted to make the most of getting a retune and throw some bolt ons at it and see what it would do. I then threw together a bit of a mix n match build of marketplace deals starting with a GCG GTX3076R, a turbosmart FPR6, 980cc injectors, walbro 460, jackspanian ffp, throttle & fuel rail. At this point it was coming along nicely, the shop was making quick work of it and the bay was looking a lot nicer without the stock crossover intake. I also got them to replace the noisy centre bearing while it was off the road. Then we couldn't get an OEM CAS to talk to the haltech so ended up getting a PRP Street Trigger Kit for it.   While the car wasn't playing nice it decided to kill the stock alternator too so went with an LS1 alternator conversion kit. By now the car was pretty much done and ready to go but come tune day the car kept throwing the timing out every time it would warm up. Upon further investigation it seemed to be warping the PRP trigger bracket when the metal would get hot and expand which would cause the sensor to lose timing as it moves. Herman advised that they have seen the issue a few times now and don't know what the cause is. At this point I decided to switch to the PRP Pro kit with the crank trigger and considering the whole timing belt would have to come off I decided to get a new timing belt kit with water pump fitted. The car would now run fine with no issues and it was finally tune time. It ran up a healthy 275kw but ran out of boost due at 17psi to the rear housing being undersized. At this point the clutch also started slipping and due to it still being a weak RB20 box the tuner set it up to ramp from 8psi up to 17psi with the revs so that it wouldn't load up the clutch and box as hard. Car drives like a dream now. With the car back on the road I could return my focus to the smaller details, starting with getting a set of badges for the hood and quarters. I was struggling to drive with shoes on and I noticed that my accelerator pedal sits higher than my brake and clutch, if someone could confirm how it should sit that would be great. Next little changes was a killallwipers rear windscreen wiper delete, I also got some interior bits I was missing such as parcel shelf speaker covers, wiper trim cover, and boot floor and trims. Finally made it to a SAU NSW event which was awesome to cruise with a bunch of likeminded individuals. Another creature comfort I decided to look into was my lack of A/C. Since the Haltech got wired up the digital climate would power up now, and would blow but no cold air. First issue noticed was the lack of belt on the A/C compressor. After sorting that to no avail, it also had no A/C gas in it, but turns out the condenser has a huge leak. We are almost caught up on the story so far, but at the start of this month while coming into a driveway I heard a huge clunk in the front end to which I got out to witness whatever dodgy camber arms someone installed in this at some point decided to snap in half and I feel very lucky that it didn't happen at speed. Managed to get the car fixed the next day with some replacement GKtech arms. Next problem to address was the leaking gas tank from months ago. Checked the pump hanger seal first but that was fine, stuck my camera up after filling up to try scope out the leak which looked like the breather hose. Got the car up on a hoist prepared to drop the tank when I reached up to feel with my hand and I could feel that the hose clamp was missing and soon after felt that there was a gaping hole in the top of the hose. Replaced and tested and the car holds its liquid now and doesn't give me a fume headache whenever I drive it now. Finally have caught up and now onto fixing my latest issue which is the lack of dash light when driving at night, checked fuses first, then when searching I found the common problem of the headlight switch burning out but mine looks fine. Next test will be plugging a known working headlight switch into my car to tell if my switch is dead. Sorry for the long read but I wanted to be thorough, so if anyone made it this far I salute you soldier. Enjoy the rest of your day and I will keep this updated with issues I find/solve and any cool mods I can do inbetween. Merry Xmas!
    • can someone tell me what information a block number of 330680a on a rb25det engine specifies?
×
×
  • Create New...