Jump to content
SAU Community

Recommended Posts

Item: R32 Skyline GT-R with blown engine

Year: 1990 Model

Condition: Knock In Engine & Panel damage

Price: $5000 ONO

Location: Carindale, (Brisbane) SE QLD

Contact: Send PM

Comments:

Car just recently came over from Japan, unfortunately with my luck it has a knock in the engine and will now not start. The car also has no front bar and front seats.

The car is straight and underbody shots can be provided. Its all in good order, just needs funds to finish it. Not interested in parting it out, might be interested in swaps depending.

Excellent project car, suitable for track/drift or even for parts, would also not pass compliancing as there is a major dent on the rear quarter.

Thanks. 0406162343.

post-12391-1200964093_thumb.jpg

post-12391-1200964111_thumb.jpg

post-12391-1200964133_thumb.jpg

post-12391-1200964160_thumb.jpg

post-12391-1200964189_thumb.jpg

Edited by chris2five
Link to comment
https://www.sau.com.au/forums/topic/202593-fs-r32-gtr-brisbane-5k/
Share on other sites

If I have my sums correct....

1) Engine rebuild - circa $6500

2) Compliance - circa $3500

3) Front bar and seats - circa $750

4) Bodywork and spray - circa $4000

5) Miscellaneous (stereo, gear shift knob, pedals, that's just what I see) - $750

That's $15000. Given that this would then be about a $20K car, suggests car is worth $5K at most. When I say at most, there is obviously no guarantee that the other mechanicals are OK as well, nor any guarantee that the car actually will pass compliance (especially if the complier sees this post!!).

I'll offer a genuine and immediate $3500. If others don't agree, by all means, they have every opportunity to offer more.

I suspect you would be much better off wrecking the car, despite your wishes to the contrary....

cheers,

J

let me know if you want to sell your cat back exhaust system and what kind of exhaust system is it, let me know if you do and i can giv you a nismo exhaust to suit your gtr, let me know mate if you wish to sell parts,

cheers mate and gl wid da sale if you dont wish to apart

what happened to the I/C? how come you bought the car without seats/ front bar etc? was the car partially stripped in japan? Dash alignment looks kinda odd to me...

do you have all the correct paperwork?

The car didnt come with seats etc... I didnt pay top dollar for it, so I didnt expect the world.

dash alignment? what does that suppose to mean..

and i said I have all the paperwork so yes I will say it again, yes..

PM's replied.

I swear why are there so many haters I am just trying to sell a car and I have tried to list as much info as possible.

The car didnt come with seats etc... I didnt pay top dollar for it, so I didnt expect the world.

dash alignment? what does that suppose to mean..

and i said I have all the paperwork so yes I will say it again, yes..

PM's replied.

I swear why are there so many haters I am just trying to sell a car and I have tried to list as much info as possible.

Hi Chris,

Not sure what the flavour of PM's you've been getting has been, but I think some member's commentary and questioning is legit. I like to think mine has been - so I don't regard myself as a hater. However, put simply, anyone with even half a brain wanting to purchase this (or similar) vehicle would (or should!) ask such questions, and I would have to say that perhaps you didn't list all the information possible. That said, let's move forwards from here, for it is still an R is it not, and therefore worth something. Mine was a serious offer and - to be honest - I am not sure how much more you think it will go for (although i appreciate you may not be happy with the price I am offering). I believe someone else has also offered - hopefully this was more, but if so - at what stage do you consider this to be worth, or not worth it?

Free bump anyway - and GL with the sale - it's a worthwhile project for someone!

  • 1 month later...

mate i got a datsun 1200 ute with a ca18 engine if your up for a swap + cash?

needs a little work too

Its on ebay at the moment if you want to have a look

http://cgi.ebay.com.au/1983-DATSUN-1200-UT...1QQcmdZViewItem

...don't know of too many mechanics who - at circa $80 per hour - won't want less than $1200-1500 for an engine in/out job. Then you have to find a replacement engine (including freight) for $2K - given most people with rooted RB26DETTs are still silly enough to think that they're worth that - no way you're gonna get a good one for $2K at your door.

(costs for service and tune ?????)

front bar can be sourced, fitted and painted for $800 for sure....but not the rest of the car. And given the reference to the large dent in the rear 1/4, no way you'll fix and spray the car for a 1/4 of that....but hey, if you only want it for track work....front bar will do fine.

I guess then we're forgetting track work is a b*tch when there is no seat (not to mention luxuries like a gearshift, etc) - but even more difficult unless you have a car and a trailer to tow it with - after all, it can't be street registered, only a track car. But you still have to get it into your name....so how do you take legal title (where stamp duty is payable)...I ain't too sure on this myself. In fact - can anyone answer this for me - how can one take legal title of this without registering? I guess it must be sold as some sort of 'asset' but not as a car. This just does my head in....

At the asking of $6500 plus your numbers plus tweaking for reality I'd still get closer to $13K. With ALL the compromises. Unless of course the asking price is reduced, which is why....

PM SENT!

haha yeah sure. mate I'm telling you from far more experience in these things, that you and the undercut crew, who think it's possible to undershoot on prices when restoring cars, if only you had any idea on the costs that start to mount up. your chair at $40 is likely to be filth, but if you actually want to find these sorts of parts, get em to your door, get em fitted (etc etc) such as the engine for $3500 (lol at that one) then i'm telling you no way.

or perhaps you should buy it. get a killer track car for $9k. I think I'd be paying $13K. but I'm happy to buy if the price is negotiable. stop telling people what a bargain it is - and prove it to us - just buy the thing! Oh, wait, that's one of those other complexities when selling a car...finding someone who lives less than 3000 klms away, who not only says that they want to buy it (this forum is riddled with such grandiose statements) but has the means and intent to buy it....and all the other little ducks in a row.

for someone from WA you seemingly have an avid interest in this car - so far as to say you should contemplate buying it, prepping it and on-selling it. could be a killer investment.

it is what it is, ok?

a great car which can't be complied or registered. needs a very expensive engine fitted. needs bodywork. needs trim. needs one heck of a lot of TLC. but it has potential. the seller PM'd me yesterday, to which I have replied, so I'll await his feedback. I'm not trying to knock his thread, but every time someone such as yourself posts details which I think may be misleading to other forum members who do not know the finer details, I feel strangely compelled to respond and help illuminate the situation. may be better you don't post any more budgeting info, as it doesn't help chris sell his car. focus on it's potential, but don't gloss over the prices, especially to the detriment of others.

peace guys...

chairs are like 40 bucks lol

gtr seats for $40? where can i get me some of these bare seats with only springs and no rails? lol. if you try to source them from a wrecker, you could maybe find stuffed ones for about $450 a pair......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...