R32 Bee-r Rev Limitter

[-Jay-]

USE THIS AT YOUR OWN RISK, I WILL NOT BE HELD RESPONSIBLE FOR ANYTHING BROKEN/FRIED/ETC AS A RESULT OF USING THIS GUIDE!

Last week I recieved my bee-r rev limitter and searched around for an easy install wiring diagram for it. Didn't really find one, so I got the ecu wiring diagram, found out which wire was which and installed it today.

As you can see I have edited the original instructions and replaced the Japanese with English so its a quick guide where each wire goes on the ecu.

I also took a picture of my spare wiring harness for the people that don't like reading things like wiring diagrams.

This setup works for me, I will note I am also using the Greddy Emanage Ultimate and haven't yet experienced any problems.

Hope this helps someone out.

[thrashworks]

Awsome, Clear instructions mate.

Thanks for the help.

[bobba]

Thanks mate. The 'English' instructions were a joke with the japanese wire colours!

[super_s13]

so this Bee-r Rev can raise the limiter is that correct. Is this the same wiring for a rb25det.

[bobba]

No, it cannot raise the factory limiter, which will still kick in.

[grimreaper]

i know this is a old thread and all but will how that diagram is wired will it work on a rb20det

[bobba]

Yep that's how mine is wired.

BTW. don't use it too much, it blew my O2 sensor...

Edited June 9, 2010 by bobba

[W0rp3D]

Yep that's how mine is wired.

BTW. don't use it too much, it blew my O2 sensor...

How does it work as an antilag device?

how quickly will it kill my turbo?

[I8EE]

cheers! good post!! helped out heaps....