Jump to content
SAU Community

Timing Belt Cover

InterCooL

By InterCooL,
in General Maintenance

 Share

Recommended Posts

GeeTR Grand Master

GeeTR

Posted
Posted

Prollly asking for troubles. That said, if you have the OEM stone tray underneath, you'd have to be pretty unlucky for something to go through the belt / teeth.

In these circumstances, i always imagine what i would think if the worst case scenario occurred... I'd kick myself.

Id leave it on.

Duncan Grand Master

Duncan

Posted
Posted

Asking for trouble mate. Anything that falls at the front of the motor will end up behind the harmonic balancer. If you leave it there it will destroy your timing belt and then engine. If you notice something falling there it is balancer off to retreive it.

They get left off because it either looks good, or because it makes it easier to adjust cam gears.

Either way its not a good idea

Victory Mentor

Victory

Posted
Posted

I cannot see any reason to leave the cover off unless you were having the car tuned on the dyno and needed to adjust the cam gears as part of the tune. After that I would always have a cover on. If it is a look thing that you are after they now make clear covers for RB26 and RB25 motors.

I have first hand experience with the type of problems that can occur with an open motor. I once dropped a 6 mm bolt down past the timing chain in a Mazda engine. After much effort we finally got it to fall all the way through and into the sump to allow me to retrieve it by removing the sump. This took TWO WHOLE DAYS to get the bolt out and an unbelieveable amount of frustration along the way.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      MLR's Bogan cruise ship

      By Kinkstaah · Posted

      Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • sonicii
      Mechanic in Victoria

      By sonicii · Posted

      I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • GTSBoy
      R32 GTR clutch master cylinder adapters

      By GTSBoy · Posted

      Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...