Jump to content
SAU Community

Project R35 Gtr Targa Preparation - Progress Pics


Just Jap Racing

Recommended Posts

From the reviews i've read, the GT2 has apparently 'lost it's sole' because it dosn't try and kill you anymore. But still i'd rather be in a GT-R in the wet. And Richards is probably faster in the wet than most of us in the dry.

Link to comment
Share on other sites

  • Replies 144
  • Created
  • Last Reply

Top Posters In This Topic

You all must be retarded. Who the hell whinges about it's colour?? We may not like your boring white, grey and black skylines..... At least this one is going to stand out. Donut King's brand is pink.... You see the bright pink race cars and you think "Hey that's Donut King!!" which si the whole point of running/sponsoring race teams... To get your brand out there....

I think it's fantastic!! Good luck with the car guys!!

Link to comment
Share on other sites

Steve....um....do you need a driver for the targa? I have driven in fwd 26 year old cars that demand a lot of attention on the road...so i think im perfect for the 35gtr :rolleyes:

I will even give up my beagle and my parents to drive that car in the targa - oh and there shoudl be donuts inside too :D

Link to comment
Share on other sites

wouldn't be any performance changes if it was my brand new, undeveloped race car lol I'd be happy just to get it to the end without breaking something :ermm: bigger exhaust and ecu without a speed cut would be it for me.

Saw the car today, the interior has been stripped for the cage, it looks great and should be ready well before targa at this rate.

putting the cage in will be interesting, especially at the b pillar - there is a lot of factory bracing that is in the way of normal cage mounting points

Link to comment
Share on other sites

wouldn't be any performance changes if it was my brand new, undeveloped race car lol I'd be happy just to get it to the end without breaking something ;) bigger exhaust and ecu without a speed cut would be it for me.

Saw the car today, the interior has been stripped for the cage, it looks great and should be ready well before targa at this rate.

putting the cage in will be interesting, especially at the b pillar - there is a lot of factory bracing that is in the way of normal cage mounting points

One is a no brainer the ECU must be modified to remove the speed limiter.

Link to comment
Share on other sites

Please dont take offence to this, its nothing personal but those pics make me sad. ;)

To think the car came from a multi-million dollar state of the art assembly line, worked on by highly trained people only a few weeks prior

to this...

paint1.jpg

Will be good to see it at the Targa but just wished it was worked on in a workshop/paintshop more like the race teams.

Again, no offence just stating an opinion.. Goodluck in the Targa.

Edited by N/A®
Link to comment
Share on other sites

Maybe Im used to the setup in JP these days.

Maybe some of the guys who have been here and seen the usual setup of workshops will agree with me.

Considering how much the car is, what your outlook is about the car, dont you think for it to be taken apart in what looks like a shed, a little sad??

Im not saying that paintshop or JustJap is somehow cheap, just kinda an unfitting end/renewal to a car hardly 1,000kms old.

I mean just look at whats holding this 'GOD' of Nissan... a freakin old wooden block...

Anyway, no need to agree with me. Just think about it..

Edited by N/A®
Link to comment
Share on other sites

i really dont see your point! that paint shop produces very good paint work!

and it's being prepared as a race car!

it's a paint shop! and the guys were kind enough to shows us the progress of the car!

heaven forbid ever seeing someone in japan use a block of wood for anything,

tsukuba in december

post-17546-1201360934_thumb.jpg

nismo,s 350 z racer ( i think thats the president of Tomei in the background)

post-17546-1201361324_thumb.jpg

well this is not a block of wood but a dirty old bit of steel pipe holding this racer from rolling away,

post-17546-1201361598_thumb.jpg

Link to comment
Share on other sites

Ive seen some great paint-jobs done on cars that were housed in sheds.

Sure TS's smokey's workshop, for example, isn't the cleanest but we all know the quality that comes from the Top-secret garage.

I worked at a place in my teens as an apprentice and in my first year it was my job primarily to make sure the floor and the workshop were spic and span whenever, wherever. That was my boss' BMW ethos and i respected him for it...but that was him.

Theres no reason why other workshops will do a lesser job because of a dirtier floor!

lol, i still remember exhausting myself trying to hammer out the screwed rear suspension arm bushes on a 7 series saloon when the "boss" comes up with a blow torch to show me and another apprentice how its supposed to be done...

Ive also seen F1 cars being put together in rooms resembling surgery prep....

stunningly clean.

Regardless, I reckon with a crash repairer with a name like " ADAMS" crash is a sure fire winner if you ask me!, lol//

Edited by m3gtr
Link to comment
Share on other sites

yeah Targa will be televised, not sure which channel - there is a Targa 2008 thread in the motorsport section which will be a good place for updates when the event starts. Kel is heading down to navigate again this year and there are probably 5-6 other cars who have people on the forums, mostly gtrs.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...