Jump to content
SAU Community

Maximum Legal Engine Size In A Skyline?

Norbie

By Norbie,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

Norbie Rookie

Norbie

Posted
Posted

Has anyone looked into this? I want to put a 5 litre turbo engine in an R32 GTS-t but it's been suggested the car is too light and I won't be able to do it legally (in Qld). Someone else suggested the GTR as it's a bit heavier but I'm not sure if it would be considered a different model for the purposes of an engine conversion?

The other option is an R33 which I understand is quite a bit heavier than the R32 but I really prefer the looks of an R32 so I'd like to go that way if possible. If anyone has any information/experiences regarding this I'd certainly like to hear it. :)

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Ring your state body and talk to them.

When your doing something to that level, there is a lot to look into so you'll need all the info from them to start with

I know you'd never get away legally here in Vic with a V8 in a R32 GTS-t, simply no chance

Norbie Rookie

Norbie

Posted
  • Author
Posted
Ring your state body and talk to them.

I'll definitely be consulting with an engineer before I take any positive steps; I was just hoping to benefit from the experience of members here so I can be armed with some knowledge beforehand. Surely I'm not the only person who's ever wanted to put a big engine in a Skyline?

Oh and FWIW it's not a V8. :)

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

It does tend to change, what someone might have done 2-3 years ago, might not get ya over the line today.

oo... i just say 5ltr and was big enough for me to post :)

I was chatting to an engineer ~6 months ago about various things and he said in the past 18months they'd stopped signing off on V8 conversions into Gemini's and all that type of thing (Bigger, heavier, increased HP motors) mainly on a "its just too risky" basis and with the way the courts are going i can kinda understand that point.

Doesnt help the punter but then not a lot does when it comes to cars and this country for some silly reason :)

Stinky Rooster Grand Master

Stinky Rooster

Posted
Posted
....Oh and FWIW it's not a V8. :rolleyes:

OK, you now have my undivided attention. How on earth are you going to fit a 5 litre engine into an R32 if it isn't a V config? And what the hell is it anyway?

PM-R33 Grand Master

PM-R33

Posted
Posted
OK, you now have my undivided attention. How on earth are you going to fit a 5 litre engine into an R32 if it isn't a V config? And what the hell is it anyway?

Yeah now im curious, if its not a v8, what 6 cylinder engine is it to be a 5litre turbo engine :rolleyes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Left & Right Window Regulators for 2013 Skyline V36 Coupe

      By MBS206 · Posted

      Sag as in the windows start to slowly open themselves, or they're just slow to go up/down with engine off?
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      It looks like it needs a big worm gear drive on it to control the rotating, not a few sloppy pins!
    • MBS206
      R32gtr sputtering and stalling

      By MBS206 · Posted

      As Duncan said, first there was OBD, which few cars used, then came OBD2.   Now an interesting point, OBD2 isn't even for what you want to do. OBD2 is for emissions testing. There is some sensor data on OBD2, but it's up to the manufacturer what they're putting on it. Most scan tools operate on UDS, which like OBD2 is a standard built on-top of CAN. UDS specifies how to structure a message, what very limited things mean such as "read memory address" but it does not specify what is stored in which memory address, that is all up to the manufacturer. You either a scan tool compatible with that vehicle, or to know how to reverse engineer all the data, which can take a VERY long time and a lot of vehicles to get it right. Oh and then the manufacturer does a firmware update and changes what's where... Ask me how I know that as fact Oh, and by the time you've got the scan tool that supports all the manufacturers stuff, well, you're back at "But a consult cable and the Nissan software" The main difference being most manufacturers software these days works with the same hardware readers, as the readers are built to support J2534 which is another standard for how the PC communicates with the tool to make it do specific things on the car...
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      Rotisserie is fully assembled apart from centre connector which obviously isn't required until the car is on it. It packs away fairly neatly and doesn't take up too much room. (Now that I actually have some room after my clean up!) Overall very happy with the quality of it.  Assembly was a piece of piss.  The only thing I didn't like was that the pins that lock the rotation lock wheels in place were a bit of a dick in a bucket scenario. It allowed the arms to rotate a significant amount even when locked in place.  To fix that i measured up the hole and went and grabbed a couple of 18mm fully threaded bolts and a thread tap to suit. I ran the tap through top and bottom so it was threaded both ends.  Then just threaded the bolt through both sides.  It has made a massive difference which hopefully you can tell in the before and after video how much difference it made. 20250207_161431.mp4   20250207_161431.mp4 Hopefully back working on the car over the next few weeks.   20250207_162801.mp4
    • GTSBoy
      R34 Gtt Wheel Offset Advice

      By GTSBoy · Posted

      I think my main complaint with your idea is that there is a veneer of idealism spread across it. You want the simple numbers to make it easier, but all they will do is make it easier for someone to come to the wrong conclusion because the fine details will kick them in the nuts. As it is right now, the tiny bit of arithmetic is NOT the obstacle to understanding what will fit and what will not fit. The reality of trying it is what determines whether it will fit. If you had a "standard rule" that R34 GTT guards have that magic 100mm space from the hub face to whichever side you were worried about, and someone said "excellent, this wheel is only 98mm in that direction, I'll just go spend $4k on them and jam them on my sick ride".....they would just as likely find out that the "standard rule" is not true because the rear subframe is offset to one side by a fairly typical (but variable) 8mm on their car and they only have 92mm on one side and 108 on the other.
×
×
  • Create New...