Jump to content
SAU Community

Recommended Posts

Don't hang me. I have had my fair share of trouble with police, both in cars and out, and in court too. We all drive cars that attract alot of attention. We (almost) all have modifications that we know do not comply with regulations and laws. Fair enough.

What you have to understand is, these laws and regulations are in place to protect Joe Average, who either does not have a passion for cars, or is simply too stupid for his/her own good; remember they exist for the lowest common denominator. So, when we are pulled over for being too low, too loud, putting out too many emissions etc etc, we all must be responsible for our modifications. I have been defected on my last car, and had to go to EPA for my current car. The modifications are a risk i am willing to take, purely for the fact that i enjoy the car. If i get 'caught', sure it is a hassle, but you deal with it and move on.

Lastly (sorry for the rant), not every cop out there is an arsehole. The number of times i have been pulled over by a good cop are as many as bad. There are as many who have an interest in cars as us. We keep going on about how 'only imports get picked on' but who really knows how many s*itboxes get defected? Just be polite and plesant to them and they may do the same to you. If some smart arse, attitude packing little s*it gave me stick at my work i'd be pissed off too.

Link to comment
https://www.sau.com.au/forums/topic/20329-defects/page/3/#findComment-465938
Share on other sites

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Guest INASNT
Originally posted by Ronin 09

Everybody stop for just one minute and think - yes use your brain in your head. Did it ever occur to you that WE are perpetrating the stereotype that "All import drivers are smart arses" by talking back, refusing simple requests etc etc? As a result the police officer thinks "well f*ck 'em, the next one i see i'll major defect". It's all atttitude. Just turn your egos down from 11 to about 4 and eat a piece of humble pie. It can do wonders.

BTW, below is a post i wrote in another thread where a fellow enthusiast was major defected.

the main point i get pisse off with cops is because the mods we do make the car run cleaner and make it more safe to drive. Eg lowering a car reduces its centre of gravity, hence making it corner better and lesser chance of rolling over.

Link to comment
https://www.sau.com.au/forums/topic/20329-defects/page/3/#findComment-465947
Share on other sites

seriously but its becoming really bad where anything non factory can b a defect, even a car off ther factory can b defected. 'ignorance is not an excuse' that applies to us when knowing the law, it should also apply to the police force, with none of this ****ing guilty till proven inncoent bs. its also a vicious cycle where some1 who has done nuthing wrong has the mentality "that all cops r cops' and then a cop thinks "well ****, the next time i c em ill defect em hard', this is abuse of power for personal gain which IS NOT allowed. i think if these stupid laws were dropped australia would b seen as a wonder for modified and show cars, all u hav to do is look in a fast fours mag or go auto salon to c that.

Link to comment
https://www.sau.com.au/forums/topic/20329-defects/page/3/#findComment-466050
Share on other sites

. Eg lowering a car reduces its centre of gravity, hence making it corner better and lesser chance of rolling over.

I cant think of too may corners where if driving legally you are going to roll your car, most streets in Sydney are 60-80km/hr. A car is going to understeer/oversteer before it rolls. :D

As for making the car run cleaner... come on we make the engine more effecient hp wise, but as far as noise and pollution, well thankfully its too expensive to do an exhaust gas test every rego check.

Start regular trips to the circuit, then you wont fill the compulsion to drive like a space cadet on the road. Once Police and authorities start to believe that the scene is doing the right thing, things may get better. Whilst people are neglecting to run cats, insist on speeding, racing, doing burnouts, attempting to be a D1 superstars....the list goes on things are only going to get stricter.

In Sydney they are tough but tyoically fair, but by the sounds of it nowhere near like in Vic, im actually a little worried about driving down in September.

Link to comment
https://www.sau.com.au/forums/topic/20329-defects/page/3/#findComment-466189
Share on other sites

Maybe i should stay in Albury every night, then do dawn runs at 3am into the city to see my sister, ensuring that car is parked and locked by 6.30am. To stop them defecting me whilst parked i might need a car cover. Then under the cloak of darkness ill slip back accross the border where NSW Police are caring/understanding individuals.:D :D :D

Link to comment
https://www.sau.com.au/forums/topic/20329-defects/page/3/#findComment-466302
Share on other sites

Originally posted by Raza

huu we stereotype cops.hahahah LOL....

they stereotype us ....... we dont go upto them and say PIGZ

they come to us and say here is ur hobbie tax.I MEAN FINE.

next ur going to say ned kelly was an outlaw?

Thats what i said. WE perpetuate the stereotype that import drivers suck thus should be targeted, through ignorance, contempt for the law and generally being arseholes to police.

raza has open up a can of worms. [/b]

No, just re-read what i posted. I think you've misunderstood my remarks.

Link to comment
https://www.sau.com.au/forums/topic/20329-defects/page/3/#findComment-466343
Share on other sites

I have been done twice for my BOV. Once I got a fine the police were good about it, The people that were smartarse really got a canning. One day in Campbelltown I left it pretty hard at the lights

two thick black strips up the road, Mr police man tried hard to get but not that day,

Two weeks later I was driving 60kph in a 70 zone and the

blue and reds came on, so I pulled over. He was pissed off bad

Saying I was doing 90 in a 70 zone.

I said thats yer sure I stopped at that roundabout and look how far away we are now(200m).

then he tried to say that my car was to low and to loud

I said it is a bit I was there when the car was at the ADR place and so was my brother and he is in H/patrol.

he dropped the subject and said to me SLOW DOWN.

Link to comment
https://www.sau.com.au/forums/topic/20329-defects/page/3/#findComment-466654
Share on other sites

We have this same discussion all the time over on the Syndicate Motorsports forums.

There's not alot i can say, that other people haven't already said, apart from adding in a few stories of my own.

I work nights, and on one of my 3am 'servo runs' to get some food, i drove away from the petrol station, without indicating twice, and then doing 80 in a 60 zone. A polica car then pulled out of a side street, lights blazing, and i pulled over. After talking to me for a while, he let me go, with a warning that if i continue to drive like that, he'll be seeing me again. I was polite, and did as was asked. Now, this may not happen all the time, and maybe he was just so damn cold standing outside, he just wanted to get back in his heated SS, but i was lucky. Let me say this, now i indicate out of there :(

There's been many other times, some like this, some not.

Oh, and i'd like to also add, that the ACT is the only place in Australia that has the right to refuse an Engineer's Cert. for anything. SO even with one, we're not safe. Although, we are allowed pod filters, and BOV's venting to atmosphere.

Stay safe people, and keep a cool head.

Link to comment
https://www.sau.com.au/forums/topic/20329-defects/page/3/#findComment-467198
Share on other sites

its pretty simple, drive a defective car, expect to be fined.

you drift, expect to be impounded. theres a reason why some of us have fast cars.

if you know your laws you wont get fined. in QLD its 100% legal to have a ATMO BOV, so long as it dosent produce more then 90db and dosent make your cars emitions more then what was set to the year of manafacture. so if you get done, all i say is, send me to DOT ill get emmisions testing, you get ya fine, go to dot, pack ya exhaust with steel mesh, turn your boost controler down (EBC is totally legal jsut as long as it dosent make ya car too rich) and prepare to have things shoved up ya cars ass.

i jsut want my licence back now.

Link to comment
https://www.sau.com.au/forums/topic/20329-defects/page/3/#findComment-467726
Share on other sites

ok, i finally got around to taking my car to an authorised inspection station.

The guy informed me that i had to get a full inspection done on the car, and more than likley a engineer's cert. because of the mods on my car (3 inch exhaust, pod filter and bov).

According to him ill probably have to return the car to standard form to keep my registration...

At that is gonna cost a shitload!!!.

I cant handle this shit.... im gonna sell it...

Link to comment
https://www.sau.com.au/forums/topic/20329-defects/page/3/#findComment-479266
Share on other sites

Originally posted by MotoX

....

if you know your laws you wont get fined. in QLD its 100% legal to have a ATMO BOV.....

Well if that be the case, QLD doesnt comply with ADRs, which state that ALL crank case gasses MUST go through the exhaust system - its pollution control, and has been a law for a long time.

With an atmo BOV, the crank case gasses get vented to atmosphere.

Its all well and good to say 'if you know your laws', but reality is that what gets passed depends on who does the inpspecting, not on the laws.

Link to comment
https://www.sau.com.au/forums/topic/20329-defects/page/3/#findComment-479551
Share on other sites

Hi Steve, help me out here, how does having an non plumb back BOV vent crankcase gases to atmo? The BOV should only open when the throttle is closed (partial or full) and when the throttle is closed the PVC valve opens. The cam cover breathers vent to the inlet (after the AFM) on throttle open, but to the PVC valve on throttle closed. So no crankcase gases go into the inlet on throttle closed and therefore no crank case gases go out the BOV, which only opens on throttle closed.

In fact I reckon a non plumb back BOV is a polution benefit. All the air that comes out of the BOV goes though the air cleaner first, so I reckon it must be cleaner than the ambient air going in.

Or have I missed something?

Link to comment
https://www.sau.com.au/forums/topic/20329-defects/page/3/#findComment-479914
Share on other sites

Originally posted by Sydneykid

Hi Steve, help me out here, how does having an non plumb back BOV vent crankcase gases to atmo?  ........ The cam cover breathers vent to the inlet  (after the AFM) on throttle open......

When the BOV vents some of the blowby from the cam cover breathers will be vented along with this, as it has been fed from the cam cover into the inlet pipework.

Link to comment
https://www.sau.com.au/forums/topic/20329-defects/page/3/#findComment-480314
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
    • I have a r34 sedan 1999 manual converted need some help with my speedometer it only reads upto 98km and then stops currently still running the auto cluster any easy fixes no speedo drive is connected yet, if someone has a video for wiring up the manual speedo sensor with the auto cluster please send through 
×
×
  • Create New...